| Material | Cost Per Square Foot | Average Cost |
|---|---|---|
| Concrete | $4 - 8 | $2,400 - $4,800 |
| Grass | $4 - $12 | $2,400 - $7,200 |
| Gravel | $300 | $1,500 |
| Heated | $12 - $18 | $7,200 - $16,800 |
How much does it cost to have a concrete driveway installed?
Concrete Driveway Paving Cost. Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
What is the average length of a concrete driveway?
17/09/2021 · Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature.
How much does it cost to pave a 10x24 driveway?
06/08/2021 · Nevertheless, this price typically depends on the project’s scope; like the quality, slopes, the topography of your house, curves, etc. For concrete and stamped concrete, you should expect to spend about $6 to $7 per square foot and $8 to $12 per square foot respectively.
Is asphalt or concrete more expensive to build?
04/01/2021 · Concrete driveways have a wide range of costs, from $4 for paving over gravel to $20 a square foot for complex patterns, with most falling between $6 and $20 a square foot for a new driveway. This is because there are many styles, colors, and finishes for concrete.
What’s the cheapest type of driveway material?
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...
How long can a driveway last?
It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...
How long does it take before you can drive on a new driveway?
Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....
So, how much does it cost to pave a driveway?
The first thing you are to look at when determining the cost for a new driveway is the material options. There are different materials available, including asphalt, gravel, brick pavers, concrete, tar & chip, etc. However, if you need the most cost-effective, hardest, cleanest surface material, then consider asphalt.
What is the cost of a new driveway?
The primary costs associated with having a new driveway installed include the installation, maintenance, the cost of material, and other costs. However, your expenditures per square foot could vary from $3 to $20 based on whether you choose asphalt, brick pavers, plain or stamped concrete, etc.
Other Costs
Regardless of whether you choose asphalt, concrete, or pavers, other costs may factor into the price of your new driveways, including drainage and material costs (as mentioned earlier).
The difference between the concrete types
In the process of pouring concrete on your driveway, the contractor can add stains to the mix while it is still very wet. As a result, the concrete can be tinted to match the exterior or interior features of your home.
Conclusion
Some factors influence the cost of installing a new driveway for your property. So, whether you choose asphalt, concrete, brick pavers, or even tar & chip, you should expect to get different price estimates from your contractor. However, rest assured that the benefits your home will get will be far more than whatever you spend on the project.
What is the best material for a driveway?
Concrete is a mixture of Portland cement, water, and aggregates like rock or sand. It makes a level long-wearing surface ideal for driveways, particularly in the South. Because concrete does better in warm weather than cold, it is the preferred driveway material in warmer states.
How much does concrete cost per yard?
Concrete Driveway Cost per Yard. Most concrete is sold and poured by the cubic yard, at $125 to $150 a yard. This is also true of driveways. Although many people are more comfortable speaking in square feet than cubic yards, it helps to know the total costs.
Can you polish a concrete driveway?
Polishing can be done to a plain driveway, or it can have color added as well. This can make the concrete more slippery, so it is not as popular as others. Because the polish does not seal the driveway, any stains may be more visible with this finish. Polishing does not enhance the concrete’s strength.
What is stamped concrete?
This is the process of taking a mold and pressing or stamping it into the wet concrete. This allows you to create different patterns on the driveway. Stamped concrete can mimic the look of brick, stone, and any number of other looks. Most stamped concrete is given at least one color as part of its application.
How much does a saw cut driveway cost?
A saw cut concrete driveway averages $18 to $20 a square foot. Saw cutting is the process of cutting apart the concrete into different sections. This produces a more realistic looking pattern than stamping. In a saw cut, you can make even sections or something irregular, such as making a flagstone pattern.
Can you use Portland cement to make a driveway?
This ensures that your driveway lasts for the longest time possible. Concrete contains Portland cement as one of its main ingredients. Cement by itself cannot be used to make a driveway.
What is concrete engraving?
Concrete imprinting can also sometimes be called concrete engraving. This is a method of adding texture and patterns to the concrete's surface. Like stamping, it gives your concrete various looks. Sometimes, imprinting can be used in conjunction with stamping.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
Is asphalt driveway cheaper than concrete?
An asphalt driveway is cheaper than a concrete driveway but doesn't last as long. Asphalt driveways cost $2 to $4 per square foot compared to $4 to $8 per square foot for concrete driveways. Asphalt is less durable, requires more maintenance, and isn't available in different colors or patterns.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does a circular driveway cost?
A circular concrete driveway costs $5 to $15 per square foot or 10% to 20% more than a rectangular driveway because it requires more labor to build curved forms and has a 15-foot minimum recommended width. Borders featuring stone or brick pavers cost $10 to $25 per square foot.
How much does it cost to seal a concrete driveway?
Concrete driveway sealing costs $0.50 to $2.50 per square foot, depending on the number of coats. Sealing it yourself costs $0.50 to $0.75 per square foot for materials. Sealers protect the driveway's surface and preserve its appearance.
How much does a driveway permit cost?
Concrete driveway permit. A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
Is asphalt better than concrete?
Although the color schemes of asphalt are limited to black and sometimes darker red, people prefer it because it can be sealcoated down the line to give it a new appearance. Although rarely requested, for an extra cost special tints can be added to asphalt either at the end as a sealer or during the mix process. Asphalt is better than concrete at concealing oil leaks and stains caused by cars as well.
How long does an asphalt driveway last?
Asphalt is an extremely durable surface. A properly installed, well-maintained asphalt driveway can last for 25 years or more. Asphalt is a great choice for a driveway, especially in the northeastern climates of the U.S. Concrete tends to crack and heave in the freezing temperatures of those Northern New Jersey and Pennsylvania winters and repair can be difficult and repair costs are high. Furthermore, salt used for ice melting can create pits in concrete leaving blotches across the driveway
Why do you need to have a place to flow when you have a driveway?
Though most materials are porous to some extent, rainfall needs to have a place to flow to prevent pooling around the foundation or in the middle of the driveway, where it could damage the surface over time. Driveways with slopes or angles need to be carefully sloped to force water to flow in the preferred direction.
What is the best material to pave a driveway?
Homeowners aren’t limited to concrete or asphalt for a driveway, though they are the most common choices. Those who have stylish homes may prefer to pave a driveway with materials that match their exterior, and green-space lovers may choose a grass paver alternative. The material choice will significantly influence the total price to pave a driveway. Gravel tends to be cheaper, and stone pavers typically cost more. Determine your budget, then consider the options that meet your needs and preferences.
How much does it cost to build a paver driveway?
Preparing the ground for a driveway is one of the most critical steps to building a quality paver driveway and averages between $5 and $8 per square foot. If the site needs significant grading, heavy equipment will remove rocks and add topsoil before tamping it down. Trees and plants will need to be removed as well, which could require special equipment or subcontractors. The driveway installers will level the ground or work with an existing slope to drain water properly.
Is pavers cheaper than gravel?
The material choice will significantly influence the total price to pave a driveway. Gravel tends to be cheaper, and stone pavers typically cost more. Determine your budget, then consider the options that meet your needs and preferences.
What is the best way to make a driveway eco friendly?
Rubber. For an eco-friendly option, consider a rubber driveway that can be designed in a variety of colors. Recycled rubber is poured on existing concrete or asphalt to create a surface with a slight softness to it, which may save a few skinned knees.
How long does concrete last?
Concrete can crack in extremely cold temperatures, but it lasts up to 40 years while being relatively low maintenance, which is why it’s so popular.
Why are suburban cities important?
Suburban cities are typically planned to make neighborhoods neat and orderly. In some areas, houses aren’t built at the same distance from the street as every other house, and terrain can vary from one place to the next. Ensuring the garage is accessible between the street and the house is crucial and can cost extra if the preparation process is complicated. Laying concrete or asphalt on a slope may also cost more to make sure it retains the proper angle.