Receiving Helpdesk

how much does it cost to move a hot water system

by Mrs. Bethany Hickle MD Published 3 years ago Updated 3 years ago

The only solution you may have is to move it. But this can be a costly endeavor when paying someone else to do it for you. The average cost to move a water heater is $5,000, and it costs $80 for hot and cold water hoses. Homeowners spend an average of $650 to hire an electrician, and labor costs $137 per hour.

Conclusion. The cost to move a water heater varies between $150 and $10,000. The highest costs to consider are water and gas line installations, followed by water heater replacement. Professional water heater installation services average about $2,000, but homeowners can opt to perform a DIY installation for far less.Dec 30, 2021

Full Answer

How much for relocating a hot water system?

How much for relocating a hot water system? I am thinking moving the hot water system from laundry to an outdoor location 3 meters away. I tried to get a quote but everyone of them needs a call out charge around $120 - $140.

How much does it cost to replace a gas hot water system?

I recently had my gas pipes replaced, and it cost around $3500 ish including $600 for a new gas hot water system that doesn't run hot and cold if you run it slower than flat out eg works with low flow taps. Electric hot water systems that involve tanks – do tend to fail after 7 years or so – especially in high calcium water states like SA.

How much does it cost to move a hot tub?

Typically, the average cost of moving a hot tub is $200 to $400 dollars for an on-site move, but, again, it depends on the variables and the difficulty involved. For example, if the hot tub also has to move through multiple awkward spaces, additional charges may apply.

How much does it cost to install a water heater?

Labor costs to install a standard replacement water heater are $200 to $1,000 on average. Most plumbers quote a flat rate for materials and labor, but some charge by the hour. Hiring a plumber costs $45 to $150 per hour, with most installs taking 2 to 6 hours. *Prices for a standard tank water heater.

How hard is it to relocate a hot water heater?

One of the most difficult DIY tasks you can attempt as a homeowner is to relocate your water heater. Due to factors like building codes, plumbing complications and whether your heater is gas or electric, moving your water heater is often an extremely delicate process that can go wrong in any number of ways.

How much does it cost to move a hot water tank UK?

Cost to remove a hot water tank If you're upgrading your heating system and no longer require your hot water tank (also known as a hot water cylinder), call in a professional to have it removed. This can cost between £100 – £170, depending on whether you're removing the tank or simply replacing it.

How do I move my water heater to another room?

When moving a water heater it is imperative that you are gentle with it, and that you move it in a horizontal position. You can use an appliance dolly with a ratchet strap, but first place something between the dolly and the water heater to cushion it. Use caution when moving the water heater.

How do you move a hot water heater by yourself?

Once you've gathered your equipment, meet me at step one.Step 1 Drain the Water.Step 2 Remove Any Inputs.Step 3 Walk the Heater Onto a Ramp.Step 4 Move the Heater Onto a Dolly.Step 1 Drain the Water.Step 2 Remove Any Inputs.Step 3 Create a Handle to Lift the Heater.Step 4 Slide Two Steel Bars Under the Handle.More items...

Can I move my hot water tank into the loft?

by moving a vented hot water cylinder to the loft you must raise both the cold storage tank above it and also the central heating tank. it can be done but the only real way of knowing in your case would be to get a few heating engineers to come and give you a quote.

Can a hot water cylinder be placed downstairs?

Because unvented hot water cylinders are pressurised systems, they can be installed in almost any location, making them ideal for homeowners that are tight for space. You can install them in a loft, garage, downstairs, wherever suits, although you will have to accommodate for a safety discharge pipe.

Why put a water heater in the attic?

A WATER HEATER IN THE ATTIC SAVES SQUARE FOOTAGE Giant tanks of water happen to take up A LOT of square footage, and primarily for that reason, many builders have opted to place water heaters in the attic of new homes. The number one cause for claims against homeowner's insurance in Texas EVERY year is water damage.

Can a water heater be moved outside?

Electric and gas tank-style water heaters are not designed to be installed outside without shelter. On the other hand, gas tankless water heaters have exterior models installed outside. You can also install electric tankless water heaters outside with some sheltering recommended to protect the unit from the weather.

Can I move my water mains?

It's perfectly possible to move the mains stop valve on the water supply coming into your house but it'll need a bit of planning. If you've ever fitted a new kitchen or built an extension you'll know how the stopcock always seems to be in the most inconvenient place for your plans.

Should a water heater be off of the floor?

According to the Uniform Plumbing Code, a natural gas tank water heater should be installed at least 18 inches from the ground.

How heavy is a water heater?

Tank-style water heaters weigh an average of 150 pounds empty, but it varies by size. On average, tank-style water heaters weigh 2.6 pounds per gallon of capacity. Tankless water heats are significantly lighter, averaging 27 pounds. And, under the sink water heaters weigh an average of 32 pounds.

How fragile are hot water heaters?

The anode rod and dip tube are two of the most fragile pieces in a water heater and can bend and break somewhat easily. To avoid the potential risk of bending and breakage, you can remove these two pieces from your water heater before hauling. A smooth drive will reduce the risk of bending or breaking the water heater.

How much does it cost to replace a hot water tank?

A hot water tank replacement costs $600 to $1,800 on average. Storage tank water heaters are the most common and keep 30 to 80 gallons of water heated to a preset temperature. Most systems take 40 minutes to 2 hours to reheat a full tank.

How much does it cost to install a gas water heater?

Gas water heater installation costs $600 to $2,800 total for a standard tank or $700 to $4,600 for a tankless. Gas water heaters cost $100 to $700 more than electric up front, but cost $220 less per year to operate.

How long is a water heater warranty?

Most tank water heater warranties last 6 to 12 years, depending on the brand. Tankless water heater warranties last 5 to 15 years. Extended warranties cost $40 for 2 years or $70 for 5 years and must be purchased with the water heater at the time of installation. Water heater warranty length.

How long does it take to install a tankless water heater?

Installing a tank water heater takes 2 to 6 hours, depending on accessibility. Tankless water heater installation takes 3 to 10 hours for a new install or 2 to 4 hours to replace an existing tankless unit. Replacing a water heater in an attic, closet, or other tight space increases the labor time.

How much does it cost to install a tankless water heater at Home Depot?

Home Depot charges $750 to $2,000 to install tank water heaters and $1,200 to $5,000 to install tankless water heaters. This cost includes the water heater, labor by a licensed plumber, permits, and old water heater removal.

How much does a solar water heater cost?

A solar water heater costs $3,000 to $9,000 installed or $1,500 to $6,600 after applying tax credits and rebates. Solar thermal systems use the sun for water heating, reducing energy costs by 50% to 80%. Solar water heaters can operate as hybrid water heating systems, working with electric or gas heaters.

How much does a high efficiency water heater cost?

High-efficiency water heaters cost $1,200 to $4,400 on average for the unit and installation. High-efficiency systems use less fuel to operate, create hot water quickly, and minimize heat loss, making them up to 300% more energy-efficient than standard tank water heaters.

How many feet of ducting is needed for furnace?

Furnace of course you are talking possibly as much as 20-30 feet or more of ducting changes - and depending on how the ducting is run, possibly more. Obvioously, all these are MUCH easier (especially if in non-freezing area of state) if you have a crawlspace to run the piping and ducting in.

Do you have to relocate water lines for a water heater?

The water heater of course the water lines (hot and cold) would have to be relocated, plus gas line if gas, and new electric hookup if electric heater or high-efficiency gas with heat pump or exhaust extraction fan unit.

How does a heat pump work?

Heat pump systems work by extracting warmth from the surrounding air or the ground to heat the water. They use electricity to do this, much like a refrigerator but are around three times more efficient than a traditional electric HWS, meaning big savings on running costs.

What are the options for a power source?

One of the first points to consider is your power source choices include, gas, electricity, solar, or heat pump. To help narrow down the alternatives there are several points you will need to consider.

Is LPG cheaper than electricity in Sydney?

Many residents of Sydney have access to natural gas however if this is not available to your home LPG is still an option and can be cheaper than electricity. Installing an LPG gas hot water heater requires arranging for periodic gas bottle replacements.

Is a heat pump hot water system new?

Heat pump hot water systems are fairly new to the Australian market and have been getting mixed reviews here, however, other countries, even those with very cold climates, have used them to great effect. Ensure the model you purchase is designed to work well in the cooler conditions of Sydney.

Is electric hot water expensive?

Electric storage hot water systems are probably the most low-cost option to buy, however, they can be the most expensive to run depending on your household needs. Electricity is readily available in most homes which usually means a straight forward swap over if you already have an electric system.

Is solar hot water good for Australia?

Typical cost of solar hot water system. Unless you live in a cave underground (or in an apartment) solar is probably available to you, Australia is lucky to have an abundance of sunshine , even during the winter, which makes solar a popular eco-friendly choice . Modern solar HWS are effective even during cold weather and on overcast days.

How long does it take for an electric hot water tank to fail?

Electric hot water systems that involve tanks – do tend to fail after 7 years or so – especially in high calcium water states like SA. And then they make a hell of a soggy mess. If you still want a tank – consider getting one "off peak".

How long is an electric heater good for?

Generally a electric heater is only good for 10 years, at which point you are best to start s saving for a new unit or to change to something else.

Is instant hot water cheaper than electric?

There will be a risk of damage when moving it; but that will be at your risk. Instant gas hot water is certainly cheaper to run for than electric.

How long does it take to relocate a furnace?

It really depends on your layout. It can be fairly simple one day job or it can take a week. To relocate the furnace would likely require an entirely new duct system installation which could be a few thousand dollars itself, depending on the amount of ductwork and size of your home.

How long does it take to change an AC duct?

Most of the time, it can be done in 1-2 days. Of course this depends on your existing duct system and will likely require rerouting of your exhaust and intake vents as well as your AC Lines. Hello frank ! Yes any modification is doable ! We can stop by to give you a solid price estimate .

How old should a furnace be to install a new one?

To save money, balance the system so that there are no cold pockets or overheated places with new arrangement. If your furnace is 15 years or older OR mid or Low efficiency furnace it would be the Right time to install new one at the same time.

Can I relocate a furnace and water heater?

It is definitely possible to relocate your furnace and water heater. It s common for people who are renovating and would like a open concept basement as a finished product. Costs for this can be difficult to estimate without seeing your basement. Most of the time, it can be done in 1-2 days.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9