Receiving Helpdesk

how much does it cost to install baseboard

by Dr. Ellen Reynolds Published 3 years ago Updated 2 years ago

How much does it cost to install baseboard per foot?

between $5.70 and $8.95 per linear footBaseboard Installation Cost Per Linear Foot Expect to pay between $5.70 and $8.95 per linear foot for baseboard installation. Contractors usually price installation by the linear foot, and these costs include materials and labor. However, you'll likely pay at least $15 more if you need debris removal.

How much does it cost to have new baseboards installed?

The national average materials cost to install a baseboard is $1.56 per linear foot, with a range between $1.24 to $1.88. The total price for labor and materials per linear foot is $7.09, coming in between $5.55 to $8.63. A typical 125 linear foot project costs $885.91, with a range of $693.54 to $1,078.28.

How much should I charge to install baseboard molding?

$7.75 Per Foot Installed The average cost of a floor and baseboard molding job done by a contractor is between $5.75 to $9.00 per linear foot. On average, materials cost between $1.35-$4.50 per linear foot, but premium hardwood can cost more. The overall cost for a 20×20 room is between $450-$700 for pro installation.

How do I estimate baseboards?

For instance, to calculate the linear foot measurement to replace baseboards in your room, measure the length of one wall and the width of the other. Then multiply each measurement by two and add all four numbers together.

How long does it take to install baseboards?

Finish carpenters can install trim at the rate of about 20 linear feet per hour. A typical project requiring 125 linear feet of trim would take about 6.25 hours to install.

How hard is it to install baseboards?

While the installation of the baseboard trim itself isn't hard, the cutting and measuring of the angles can be a bit tricky. The process is similar to installing crown moulding. A homeowner can easily learn how to install baseboards with this easy-to-follow project guide.

Should you paint baseboards before installing?

If the baseboards have not yet been installed, you should always paint the baseboards before installation. Minor damage to the paint finish will occur during installation, but this is expected. With most of the painting already done, you'll only need to do a small amount of touch-up after installing the baseboards.

What is the labor cost to install kitchen cabinets?

Average labor cost Including preparation and cleanup, the typical labor cost to install kitchen cabinets can range between $80 and $190 per cabinet, or $50 to $450 per linear foot. The installation price mostly varies depending on the type of cabinets involved and the professional you hire to do the job.

How much is labor for interior door installation?

The total cost to install an interior door averages between $360 and $1,150. A bedroom or closet door replacement averages $100 to $300 in labor with door costs typically range from $50 to $500. Wood French doors can cost from $600 to $4,500 or more.

How do you charge for trim work?

How much does trim installation cost? The average total cost of trim installation projects ranges from $350 to $570 nationwide, and trim installation costs per linear foot can range from $4.50 to $6 for installation and painting of simple baseboards, chair rails and crown molding.

How many linear feet is 100 square feet?

Determine Linear Feet for Flooring This is done by multiplying the total square footage by 12. So for a room of 100 square feet where a 5-inch wide floorboard is being used, the number of linear feet needed would be (100 x 12) / 5 or 240 linear feet.

How is trim calculated?

We can see that the total trim is t = tf – ta which is measured over the length between perpendiculars (LBP) of the vessel. That was about calculating the draft and trim of a vessel from its hydrostats. This can be helpful for quick evaluations of the floating position of the vessel when it is loaded.

What is baseboard in a room?

Baseboards are an integral part of any room. You can put up new paneling or wainscoting — or install new laminate or hardwood floors — but your room will still look unfinished without that simple strip of trim at the base of the wall. Baseboards mainly serve an aesthetic purpose, giving your room a polished look.

How much does it cost to install trim?

Installation Costs. Although installation costs vary by geographical location and other factors, trim carpenters generally charge $4.50 to $6 per linear foot to install all types of decorative trim, according to Thumbtack.

Why do we need baseboards?

Some folks consider baseboards a necessity because they: Cover the unsightly joint area between the wall and floor. Keep water from making its way under the floor or behind drywall, where it can set up ideal conditions for a mold infestation. Close up a potential hiding space for insects and other pests.

What is baseboards? What purpose does it serve?

Baseboards mainly serve an aesthetic purpose, giving your room a polished look. This May Also Interest You: How to Install Baseboards: A 7-Step Guide. Knowing how much baseboards will cost upfront can help you better budget for your room makeover. Here’s what you need to know.

Can you paint MDF baseboards?

As mentioned above, you can paint both MDF and solid wood baseboards. Some baseboards come “paint- ready,” meaning the trim is primed and ready to be given a coat or two of paint in the color of your choice. Another option is to purchase baseboards that are already painted. These are more expensive.

Cost of Baseboards by Style

Flat base molding is your first option if you want new baseboards. It’s a basic option, but it can still be quite expensive. Expect to pay $1.30 for each linear foot of flat base molding you want to get installed in your home.

Cost of Baseboards by Material

Cherry wood is one of the most expensive options available at $9 per linear foot. So, what are you getting for that price?

Painted or Paint-Ready Baseboards

Installing new baseboards is simple enough, but it’s still a lot of work. You may have to dedicate an entire weekend to the task to ensure all the baseboards are installed properly.

Related Questions

Yes, taking on baseboard installation as a DIY project is a realistic proposition. Compared to other home improvement projects, baseboard installation is a simple task. As long as you have a good guide to follow, you can pull it off.

What are baseboards made of?

Typical baseboard materials. The two types of materials typically used for baseboards are solid wood, usually pine or oak, and medium-density fiberboard, an engineered composite made of wood remnants.

How much does a handyman charge per hour?

Also, each carpenter or handyman will most likely use a different formula to estimate installation cost. Some might charge per hour (ranging from $50 to $100 an hour); some might charge per foot ($1.50 to $2 a foot).

Can you paint baseboards that are water damaged?

Replacing baseboards is your best option if they’re water-damaged, stained or warped.

Can you install baseboard yourself?

If you’re handy, have level floors and the project isn’t too big, you could install baseboard yourself. You’ll need a miter saw for corners (for best results, avoid using a miter box), and it might be wise to buy a few extra feet of baseboard so you can practice corner cuts.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9