Full Answer
How much does pool water delivery cost?
The price of your water delivery service depends on how far away the company will have to travel to reach you, The complexity of your pool, and the amount of water you will actually need. How much does it cost for pool water delivery? In the United States, pools range in size from 15,000 gallons to 30,000 gallons. The average professional water delivery service will charge anywhere from $175 to $380 per truckload., and most trucks hold 6,000 gallons of water.
How much does it cost to fill a pool with water?
The average cost to fill in a pool with water is $80 to $160 for adding 15,000 to 30,000 gallons to your water bill. Can you fill a pool overnight? Before adding any water to your pool, you should make sure that the pool is clean and free of any loose debris.
How do you fill a pool with water?
Where does Pool Water Come From?
- City Water and a Garden Hose. You can always connect your garden hose to an outdoor tap, and use it to fill your pool. ...
- City Water from a Fire Hydrant. Because garden hoses are such a slow way to fill a pool, many people wonder if it’s possible to fill a pool with water ...
- Well Water. ...
- Pool Water Delivery Service. ...
How much is pool water?
Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool (expressed in gallons). Measure the length, width, and average depth of the pool, rounding each measurement off to the nearest foot or percentage of one foot. One inch equals 0.0833 feet.
How much does it cost to fill a pool?
A full pool fill-in (or removal) costs twice as much (or more) than a partial pool fill-in; you can expect it to run somewhere between $9,000 and $19,000. Every piece of the pool is demolished and hauled off, and workers fill the empty hole with dirt and gravel.
Is it cheaper to fill a pool with a hose?
Yes, filling a swimming pool with a hose is much cheaper than using well water, a water delivery service, or a fire hydrant. Using a garden hose to fill your pool costs about 75% less than pool water delivery services.
How much does it cost to fill an above ground pool with water?
Cost To Fill In A PoolTypeAverage CostAbove Ground Pool Only$300 – $800Above Ground Pool + Deck$1,000 – $3,500Inground Partial Fill-In$2,000 – $10,300Inground Full Removal$4,300 – $16,400
How much does it cost to fill a 10000 gallon pool?
Filling's easy. If you have any form of town water, use that. To get the exact cost, call the water company, give them the amount of gallons, and they'll tell you. Generally, a 10,000 gallon pool holds about $25 worth of water.
How can I fill my pool for free?
In some places, a fire department will do it for free, as an exercise to flush the line. In other places, they will do it for the cost of water, or perhaps you need to rent the hoses or pay an access fee. In some cities, you can't do it at all and can get arrested for trying.
Can I use the fire hydrant to fill my pool?
Can I Use A Fire Hydrant To Fill My Pool? In terms of the question as it stands, yes, you could technically use a fire hydrant to fill a pool. That's because technically it is possible to use a fire hydrant to pump large volumes of water quickly into a swimming pool.
Will the local fire department fill my pool?
Generally, fire departments will not fill a residential swimming pool. Filling the pool could be a potential liability, plus, the water the fire department uses for your pool isn't putting out fires and saving lives.
How long does it take to fill a pool with a garden hose?
With a standard size 1/2 inch garden hose, it takes about 9 hours to fill a 5000-gallon pool. To figure the time needed yourself, multiple the number of gallons your pool holds by . 0018. The volume of water a standard hose can deliver per minute is approximately 9 gallons or 540 gallons in an hour.
How much will it cost to fill a 6000 gallon pool?
Pool water delivery prices depend on how far the company has to travel, the amount of water you need to fill your pool, and how your pool is set up. The average cost of a pool water delivery service is anywhere from $175 to $380 for each truckload of water, and the average truck holds 6,000 gallons of water.
Can I fill my pool with municipal water?
This comes at an additional cost, but the costs are significantly less than sourcing replacement non-potable water for your pool, and as touched on above it's illegal to fill your pool with municipal drinking/tap water. With these these methods of saving water, water restrictions and your pool can coincide in peace.
How do you fill a cheap pool?
Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there's no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.
How long does it take to fill a 18x48 pool?
It takes nine hours to fill a 5,000-gallon pool at 540 gallons per hour.
How much does it cost to deliver pool water?
How much does it cost for pool water delivery? On average, a professional water delivery service will charge anywhere from $175 to $380 per truckload., and the average truck will hold 6,000 gallons. With this formula, you may need three to six truckloads to fill your pool, effectively paying $525 to $2,000 total.
What is pool water delivery?
Pool water delivery is a service that can help fill up your pool. Since filling a pool with a garden hose can take days, some pool owners often turn to the professionals to have their pools filled within the hour. The cost of a pool water delivery service will depend on the distance the company has to travel, how much water is needed and ...
How long does it take to fill a pool with a hose?
In most states, 6,000 gallons is the most trucks are legally able to carry. If you’re going to fill up with a garden hose, plan on waiting up to 37 hours to fill a 20,000-gallon pool. The average garden hose disperses 540 gallons an hour.
Why is my pool water rusty?
Hydrants can cause the pool water to become rusty, which can lead to days of filtering and vacuuming. If you do not know where to find a company to fill up your pool, consider asking the dealer from which you purchased the pool in the first place. Ask your pool delivery company how they are going to deliver the water and how they are going get it. ...
How much does it cost to fill a 20,000 gallon pool?
To give you a rough estimate, a 20,000-gallon pool is about $40 to $55 worth of water. Because water delivery is so much more expensive than filling the pool with a hose, hiring this service is only done for convenience sake.
Where is Blue Water Trucking located?
They should also have some sort of guarantee. According to Blue Water Trucking, located in Romeo, Michigan, “Each load of pool water is clarity checked to give you the sparkling water you want for your pool or spa.”.
Should I drain my pool before I fill it with vinyl?
When choosing a company, always make sure they are insured in case of any potential damages. Experts recommend waiting to drain your pool until the day your truck arrives, especially if you have a vinyl liner. If you were to leave your pool emptied, it could shrink, only stretching back half the way, causing damage.
How much does it cost to fill a pool?
It costs between $4 and $10 per 1000 gallons of water on average that is used in your home. When it comes to filling a swimming pool after installation, it could take just a few thousand to over 20,0000 gallons of water depending on your pool size. An empty swimming pool could cause a charge of anywhere between $75 to over $200 for an average size ...
Why do pools need to be drained?
Many pools are partially drained below the skimmer to prevent water pipes and hoses from freezing. Depending on the size of pool, this could be several hundred to likely into the thousands of gallons of water that need replenished after a winter break.
How far away should you put a tape measure on a pool cover?
You can place the end of the tape measure on the cover and then determine the distance between the cover and the top of the pool. If you find it is 1.5 feet from the cover to the spot you expect to fill your water up to, plug that in the formula calculator.
What is easy clear pool?
Easy Clear Pool is a participant of the Amazon Associates Affiliate Program. This is an advertising program in which some links on this website will send visitors to Amazon and we may receive a commission from purchases.
Do well pumps use electricity?
If this is the case you do not have have a water bill, however your electricity is used when running your well pump. When filling a swimming pool for an extended period of time, the well pump will use much more electricity and you can expect your electric bill to rise.
How much water does a pool hold?
Pool Water Delivery: Where to Get Water to Fill Your Pool. The average swimming pool holds thousands of gallons of water. If you’re new to owning a pool, you may be surprised at how expensive it can be to fill, and how often you need to add water to keep it full.
How long does it take to fill a pool with a hose?
Time: It can take up to 48 hours to fill a standard sized swimming pool with a garden hose. Considerations: You should call your water company or utility office and ask them about the rate for filling a pool.
How to tell if a pool has a leak?
Here’s a quick test: Take a large, watertight bucket, ideally one with transparent or opaque sides you can see through. Set the bucket on your pool steps, partially submerged in the water.
How to reduce water in a pool?
Reduce evaporation. Evaporation will take about ¼ to ½ inch of water a day in an uncovered pool. Reduce evaporation by keeping the pool covered when it isn’t in use, lowering the temperature on a pool heater, and using landscaping or barriers to protect the surface of your pool from wind. Reduce splashing.
How to prevent splashouts in pool?
To reduce splashout, keep the water level a bit low to prevent water from sloshing out over the side, and check the spray force and direction of fountains or waterfalls to keep them flowing back into the pool. Mind the backwash.
Why do pools need to be top up?
All pools do need the occasional top-up, because the water level lowers due to splash-out, evaporation, backwashing, and other factors. Most pool owners need to top-up pool levels in summer (with water loss from sun and evaporation, splash out from frequent pool use, and reduced inflow from rain) every week or two.
Can you fill a pool with water from a fire hydrant?
Because garden hoses are such a slow way to fill a pool, many people wonder if it’s possible to fill a pool with water from a fire hydrant. Cost: Varies tremendously. In some places, a fire department will do it for free, as an exercise to flush the line.
What is the most expensive way to fill a swimming pool?
Transported water is the most expensive source to fill your swimming pool with. Like with many things in life, what you’re actually paying for is convenience. Most transportation companies sell water in bulk by the gallons or by the number of truck loads.
What is the most common way to refill a pool?
Using your city’s water, or regular tap water, is the most common method pool owners use to refill their pool. Most people assume that using this method costs an arm and a leg. I mean, think about when you have family staying with you for the holidays. Your bill is always much higher than it normally is.
Why do people fill their pools with water?
The most obvious reason pool owners fill their pool with water is with new pool constructions. During new pool constructions, pool owners must decide how they will fill their pool. Several factors play a part in choosing which method is most appropriate for you and your family.
What to check before using well water?
Before using your well’s water, it is a good idea to check the iron, copper, and hydrogen sulfide levels. Although the water is free, water with high levels of elements might result in overspending on chemicals. Which, for me, defeats the whole purpose.
Why does well water smell?
One of the primary concerns with using well water is the quality of the water. Water pumped from deep within the ground has a distinct odor. The sulfur smell is caused by hydrogen sulfide, which can be shocked into elemental sulfur and sulfates. However, if these levels are too high, shocking might not help.
Is it cheaper to refill a pool?
For the most part, people who refill their pools are new pool owners. Compared to the cost of the actual pool build, the cost of the water is relatively cheap. Still, we don’t recommend spending money on something that is either premature or unnecessary.
Can you truck water in California?
With states rationing water, trucking in water seems ideal for homeowners in California. Most water service companies transport potable water for swimming pools, spas, ponds, and other residential and commercial use. Of all the water sources available, transporting water in is the most convenient and fastest.
How to determine the cost of filling a pool?
Here are a few: Where you live. The type of water your home uses. Cost of water in your region. Time of year & weather conditions. Pool water volume.
What happens if you fill a pool?
If you fill a pool, you could be looking at an excess water usage fee or even a sewage fee if you’re on a city sewer system. It’s possible that if you call the water utility office and let them know about your pool refill, they could give you a discount rate or even waive the sewage fee.
Why do you need to fill a pool?
An irreparable pool – This could be a pool seriously damaged due to a natural disaster such as an earthquake. In this case, it must be drained and repaired. Also, your pool water may be beyond help if it’s been neglected for too long.
What happens if you don't smell water?
Even if you don’t smell or taste anything, your well water could still contain metals like iron, copper and other elements that could damage your pool. These things can make getting the right chemical balance nearly impossible.
When do you need to top off your pool?
Most people also need to top off the water level when opening it for the summer or after a lot of evaporation or splash out. Other scenarios that require refill include converting to a saltwater pool, or if it’s been 3 – 5 years since the last refilling.
Can a well pump fill a pool?
Capacity – Some wells may not be able to handle the amount needed to fill a swimming pool. If you run the well dry, you may have to drill a new one, which can cost thousands of dollars and several weeks. Well pump – If you have an older pump, it may not be able to handle the strain of filling a pool. Even if it can, it might not be able ...
Can you drain a pool and start over?
The chemical balance, algae, and bacteria might be so bad that no pool treatment will work. In that case, the only option is to drain the pool and start all over. New pools – This is obvious, but certainly a better situation than #1. At least in this situation, it’s not an emergency or health hazard.
How do I fill a pool with a well pump?
Both can cause headaches and unwanted expenses. Simply attach a dedicated hose to your well pump, place the other end of the hose in your pool, and turn the pump on.
What is the best way to fill a pool?
Check with your city because a water delivery company just might be a phone call away. If you have a swimming pool, chances are you have a garden hose hooked up to an outside spigot. The most common options for a pool water fill are: City water. Well water.
How far below the surface is a well in Florida?
Home wells are abundant here in Florida. We live on a floating sand bar, and there's water sometimes only 6 - 7 ft. below the surface. If you have a well on your land with the ability to fill your pool, you can save yourself some money by filling it from your well.
Can you fill a pool with city water?
With the right planning and calculations, you'll be swimming in no time at all. Whether you choose to fill your pool with your city water, your well, or have pool water delivery service, you're ensured to have clean and safe pool water all swimming season.
Can I order pool water and swim the same day?
Another huge benefit is you can order your pool water and swim the same day. The downside is the possible cost. Pool water delivery may cost a little more than filling your pool by yourself. It's best to get several quotes from local suppliers and compare that to your city water fill-up.
Do you have to pay extra for a 20,000 gallon pool?
Many places have their water and sewage charged together, so if you're filling a 20,000 gallon pool, you might be charged with a sewage fee , even though you're not using the sewer. Call your utility company and tell them you're filling your pool.
Can sulphur in a pool cause stains?
Sulphur can prevent your pool chemicals from properly working and high iron and copper content can cause pool stains and damage your equipment if left unchecked. Test your well water for minerals and metals before filling your pool so you'll know what you're dealing with and what your chemistry starting point is.
How much does it cost to install a saltwater pool?
Saltwater pool installation costs range from $29,000 to $57,000 when building new. When converting from a chlorine pool to saltwater, costs range from $600 to $2,200, or about $870 per 10,000 gallons to install a saltwater chlorination system, also known as a salt chlorine generator.
How much does it cost to excavate a pool?
Excavation is priced at $9.22 per cubic foot, and the total cost to excavate a pool ranges from $1,770 to $13,800, with a typical minimum charge of $3,000. Save money on dirt disposal by using it elsewhere in your yard.
How much does a vinyl pool liner cost?
A vinyl pool liner costs $1,400 – $4,800 for an inground pool, $350 – $1,600 for an above ground pool, and has to be replaced every 10 years. Concrete – $2,750+/year. Concrete can crack and will require expensive resurfacing every 10 to 15 years.
How much does an inground pool cost?
Inground pool costs range from $18,000 to $85,000 with pool owners typically spending between $28,000 and $55,000. The excavation and total labor costs make up 25% to 50% of the pool's cost, followed by a variance in pricing based on the type of pool materials.
How much does it cost to build an inground pool?
Inground pools cost between $50 to $125 per square foot to install without any upgrades, whereas above ground pools range from $8 to $16 per square foot. Custom pool upgrades like a pool deck, fence, hot tub, lighting, or a cover, will add $2,000 to $10,000 to your project cost.
How much does it cost to add a hot tub to an existing pool?
An inground hot tub costs $8,000 to $25,000 to add to an existing pool. Prices depend on the size of the spa, the number of jets, materials, and features. Installing an in-ground hot tub in conjunction with an inground pool costs $6,000 to $15,000 more when built simultaneously.
How much does a pool screen cost?
A pool screen enclosure costs $4,000 to $14,000 or between $5 and $15 per square foot on average.
