Full Answer
What materials do I need to build a 12X16 deck?
What material do I need for a 12×12 deck? How many posts do I need for a 12x16 deck? You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.
What is the average labor cost to build a deck?
Labor Costs Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.
What is the average cost of building a deck?
Building a Deck in the Winter Can Save You Money Building your deck during the winter months can actually save you money on both labor and materials. You could save on labor costs because contractors in your area will likely have fewer jobs. As a result ...
How much does it cost to install a composite deck?
The total cost of materials includes the boards, railings, posts, and hardware you’ll need to complete your deck. Labor costs to install composite decking run between $1,500 and $2,000 per project or $10 to $14 per square foot.
How much does it cost to build a deck 12x16?
12x16-foot Raised Deck: You could build a 12x16-foot treated-lumber raised deck with stairs, for about $3,100 in materials. Hiring someone to do the work for you brings your total cost to $3,700-$9,500.
How much does it cost to build a 12 by 15 deck?
The average cost of constructing a deck is $25 per square foot, with most homeowners spending anywhere from $4,380 to $10,500 on the project. A low-cost deck built with basic materials costs $15 per square foot, while a high-end deck costs $35 per square foot.
What is the average labor cost to build a 10x10 deck?
Cost To Build A Deck Yourself Building a 10x10 foot ground-level deck yourself would cost about $700 for the materials versus paying a professional around $2,200 total. You could use pressure-treated lumber to build a 16x16 foot deck for $1,500 or hire a contractor to do the labor for you for about $6,400.
How much does it cost to build a 12x12 wooden deck?
A deck will cost much less than adding a similar size room to your home. For example, the cost of a 12 x12 deck. A 12 x12 deck can range in cost from $2 200 to $13 000, but the average will be $6 000. Costing $40 a square foot but can be as little as $15 or as high as $85, depending on the deck's features.
What is a good size deck?
Most builders suggest that your deck should be no larger than 20 percent of the house's* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!
Why are decks so expensive?
Labor and materials are the primary factors that impact the costs in building a deck. Everything up to installing floorboards will have a specific cost that can be determined during the planning stages. Railings can add slightly to overall costs or can be ornamental and therefore add a chunk of change to the price.
How many posts do I need for a 10x10 deck?
A freestanding 10' x10' deck needs 4 posts, supporting two pairs of 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood.
Does a deck add value to your home?
In terms of pure home resale value, wood decks provide the best return on your investment. The more affordable material translates to a more affordable deck project while boosting the resale value of your home to a similar amount compared to a composite deck.
How many hours does it take to build a deck?
A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level. A professional team can usually have the project done in a week or less.
How much is a 10x10 composite deck?
Cost to Build a Deck by SizeSizePressure-treated wood Average cost per sq ftComposite decking Average cost per sq ft8x10$520$1,12010x10$650$1,40010x20$1,300$2,80012x12$936$2,0163 more rows
How much is a 12x12 Trex deck?
Trex Decking Cost Per Square Foot The materials cost for a Trex deck with substructure, decking and fasteners included, generally falls into the range of $9 to $16 per square foot.
How much does labor cost for a deck?
Labor Costs For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.
How much does it cost to build a deck?
The average cost to build a deck is $7,654 with a typical range between $4,087 and $11,249. Labor and materials each make up roughly 50% of the budget for a total average cost of $30 to $60 per square foot.
How much does decking cost?
Decking runs anywhere from $2 to $30 per square foot. "Decking" refers only to the boards that make up the walking surface of the porch. This cost does not include hardware, framing, concrete, posts or other supporting construction.
How much does a floating deck cost?
Floating decks run $20 to $60 per square foot . The only difference between the floating and standard type is attachment. Floating styles aren’t attached to the home and require a few additional support posts underneath the structure.
How much does mahogany cost?
Mahogany, an American hardwood, costs $8 to $11 per square foot for planks. Total material prices will vary because it's not used in the posts or framing. You might find this on concrete, steel, aluminum or pressure-treated framing.
How much does a deck increase the value of a home?
The average wood deck increases a home’s value by about $10,000 or about 50% to 75% of your installation investment. Expect your property taxes to go up as well. You may also increase your insurance premiums.
How much does it cost to add a second story?
Adding one to a second story ranges from $40 to $50 total per square foot for additional posts and stairs. Accessibility issues can push that price even further up. For example, trying to install one over a garden or pool requires erecting additional scaffolding.
How much does exotic hardwood cost?
Ipe exotic hardwood costs $10 to $20 per square foot. Tight regulations and industry oversight can make the tropical woods harder to come by, but their durability is enough for some people to justify the price.
How much does it cost to build a platform deck?
Platform decks are a nice alternative to a patio and are ideal for holding hot tubs and entertaining. They can be made of any decking material but are most often built of wood or composites. They cost around $10 to $30 a square foot to build, depending on the material.
How much does composite decking cost?
Composite decking, costing $8 to $15 a square foot, is easier to work with and may have lower labor costs. The average cost per square foot to build a deck is between $14 and $44, depending on the material, deck type, and geographic location.
What is composite decking?
Composite decking refers to any blend of materials that may include plastic, wood, wood pulp, fiber cement, or vinyl in a deck plank or railing. Composite decking is made to look like wood decking but does not require the same level of upkeep. Some composites are water-resistant, while others may swell when not installed properly. Some get very hot underfoot, while others stay cool. But most composite decking is easy to install and can last for years with little-to-no maintenance. Expect to pay $8 to $16 a square foot, depending on the material.
Why do decks cost more per square foot?
Decks have a range of building costs per square foot. This is because it can be made out of many materials. Various materials have different costs, and some materials can be more difficult to work with than others. This can make the cost to build a deck cost more in labor.
What is fiberglass decking?
Fiberglass decking is a subtype of composite decking. The decking is a blend or composite of materials. Sometimes, the materials are used throughout the plank. At other times, the core is made of a wood-pulp blend, while the exterior wrapper is something more durable. Fiberglass decking contains fiberglass particles in the outer wrapper or core. Fiberglass decking is considered low-maintenance and durable. It may get hot underfoot, depending on the manufacturer. The material costs between $8 and $15 a square foot on average.
How much does Trex cost?
It has a realistic-looking wood grain and is a popular material for both looks and longevity. Trex costs between $8 and $16 a square foot and costs the same to install as wood. The total cost range is $16 to $46 a square foot to build a Trex deck, depending on the build complexity and type and location.
What is the best material for a metal deck?
For those who want a metal deck that does not get as hot in the sun as steel, aluminum is a good choice. Aluminum is a lightweight metal that can create a contemporary-looking deck. It is easier to work with and install, but it can be very noisy. It makes echoing and pinging noises when walked on and struck, and it dents easily. But it is flame and insect-resistant and does not rot. Aluminum decks cost around $12 to $13 a square foot for the material.
How much does labor cost for a deck?
Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.
How big is a deck?
Because everything is priced based on square footage, the smaller your deck, the less you will pay. The average deck size range is between 200 and 500 square feet.
What type of foundation should I use for a deck?
Your decking needs to have a foundation to rest upon. When you are deciding on your substructure, you will have three main options to choose from: wood, steel, and aluminum.
How much does pressure treated wood cost?
On average, you can expect to pay between $8 and $10 per square foot, which makes it more than soft woods and less expensive than specialty hardwoods.
Why add a deck to your home?
Adding a deck to your home can increase the beauty, value, and style of your home. A deck is a less expensive method to increase home resale value than adding an addition such as a new bedroom.
What is the best wood for a deck?
Natural woods are still the most popular options for decking. You also have a near unlimited choice for the wood you use. The most common softwoods are cedar and redwood. These will run you between $3 and $5 per square foot.
How much does bamboo cost per square foot?
Bamboo will cost you about $3 per square foot and will last a long time. The downside to natural woods though is the maintenance. Unlike composites, you will be required to treat the wood annually to prevent warping, damage, and mold. iii. Pressure-treated Wood.
How much does it cost to build a deck with pressure treated wood?
Non-corrosive deck screws are used to connect the floor boards to the joists. It costs between $45 and $47 per square foot, on average, to build a deck with pressure-treated wood flooring, including materials and labor.
How much does composite decking cost?
Wood composite decking costs about $9 to $15 per square foot, materials only.
Why is a floating deck cheaper than a concrete deck?
Because less wood is needed for the build and because the deck does not require concrete posts , the cost for a floating deck will be far cheaper than for other types of decks.
What is composite decking made of?
Wood composite decking is made from wood byproducts and recycled plastics. With some brands, as much as 95-percent of the wood composite is derived from recycled materials. Wood composite doesn't rot, split, crack, or need staining or painting. Wood composite flooring is smooth underfoot, so it lends itself well to homes with children and pets, or just about anyone who likes to sit barefoot on a deck.
Why do you need a deck?
Adding a deck to your property is a solid investment in your home. But decks do more than increase the monetary value of your property. Decks help extend your living space from the inside to the outside, giving you more room for cooking, relaxing, and socializing. You'll want to know the average cost to build a deck—before you make ...
How often should I paint wood?
At the same time, wood must be painted or sealed at least once a year. Wood can be hazardous underfoot as it begins to rot and splinter.
Is a floating deck a good idea?
A floating deck can be a good alternative to build a deck while avoiding the high costs associated with building large-scale decks. Most decks are attached to the house with a ledger board. By contrast, a floating deck is detached from the house and can even be located well away from the home. Floating decks rise no higher than 30 inches.
What is the cheapest deck to install?
Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs.
How to plan a deck?
Know your limits: A deck is a permanent addition to your home, just like a bathroom remodel or finished basement. Additions must follow local building and zoning codes, such as required distance from property lines, that may limit the size and scope of the project, Wormer said.
What factors affect the cost of a deck?
Many factors affect the cost to build a deck, such as level of finish and site preparation , but the price of professional installation always makes up a big chunk of the bill. Knowing this can help prevent sticker shock.
Can I invest in pressure treated wood?
Investing in pressure-treated wood or a composit e deck could save time and money later, especially if you plan to stay in the house for a long time. Time it right: The warmer months are most popular for deck building, so scheduling your installation in the offseason could be a way to save.
