We have done a little research to find the average cost of concrete in San Diego. Here are the average costs and prices reported back to us: $7.88 per square foot (4 inch reinforced slab on grade) (Range: $7.46 - $8.30)
How much does a concrete slab cost in San Diego?
$6.54 per square foot (4 inch reinforced concrete slab) (Range: $5.74 - $7.33) Was this information helpful? Professionals in the San Diego area have provided information about how much concrete cost (s).
How much does it cost to get concrete delivered?
Getting less than a full truckload (short-load) or weekend delivery will add to your final cost. If your job site is more than 20 miles away from the mixing plant, expect to pay an additional fee of $9.50 per mile. A typical 6" thick concrete slab costs $5 to $10 per square foot depending on the concrete quality and project size.
How much does it cost to stain concrete?
Decorative options such as stamping (see stamped concrete cost ), staining (see stained concrete cost ), and special finishes will add significantly to the cost of the project. For plain concrete, you can expect your price to fall somewhere between $3.75 and $5.75 square foot depending on the project size and complexity.
How much does it cost to grade a yard of concrete?
Components of a Concrete Price Analysis: Cost: $108 per cubic yard* Grading: $50 - $70 per hour Subbase: $12 - $18 per cubic yard Concrete Forms and Finishing: $1.50 - $2.00 per square foot Reinforcement: $0.15 - $0.30 per square foot
How much is concrete per square foot San Diego?
Concrete slab cost in San Diego, California ranges from $7 to $13 per square foot (reinforced concrete). Concrete pad cost ranges from $6 to $12 per square foot (un-reinforced concrete). If demolition of an existing slab is required, then add $1.30 to $2.10 per square foot to the cost.
How much is a concrete driveway San Diego?
Average Cost of Concrete Driveway Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000, or $6 per square foot.
How much does a 20x20 concrete patio cost?
between $1,200 to $6,000A 20-foot by 20-foot concrete patio runs between $1,200 to $6,000, including labor and materials. Adding decorative finishes and colors could make the price even higher.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How much does it cost to install a concrete driveway in California?
A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install.
Which is cheaper pavers or concrete?
The up-front cost of pavers can run anywhere from $8 to $25 per square foot, while concrete runs about $3 to $6 per square foot.
Is it cheaper to pour concrete or build a deck?
It's cheaper to build a concrete patio in terms of both the initial cost to lay a concrete patio, as well as its cost of maintenance over time. A concrete patio costs only $4 per square foot, while a deck costs roughly $6 per square foot for lower-cost pressure treated lumber.
Does a concrete patio increase home value?
The answer is yes! Adding a covered patio definitely adds value to your home. However, as with any upgrade, it's important to remember that the most high-end, extravagant upgrades probably won't increase the value significantly more than middle-range upgrades.
How much does it cost to pour a 20x20 slab of concrete?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How much does it cost to pour a 30x40 concrete slab?
How much does a 30×40 concrete slab cost? The average cost is $4 to $8 per square foot. The median price is about $6 per square foot. Based on these averages, you may pay $4,800 to $9,600 with a median estimate of $7,200.
How much is concrete per square foot California?
Concrete cost per square foot. Expect to pay between $4.25 and $6.25 per square foot to have a plain concrete slab poured.
What are the benefits of concrete in San Diego, CA?
You will find that concrete in San Diego, CA offers a number of benefits that make it worth looking into, especially if you need a new driveway in...
Is San Diego concrete expensive?
One of the great things about San Diego concrete, which you will quickly discover, is that it is fairly inexpensive, so you most likely won?t have...
Are professionals necessary for San Diego concrete installation work?
As much as you may not want to pay for concrete installation in San Diego, it will be necessary to hire legitimate professionals. Since you do not...
Do you need to know the cost of concrete in San Diego?
Knowing the concrete San Diego costs is recommended before starting a concrete project . While looking at national averages can give a general idea, such numbers usually do not include factors which may affect the final price, such as local labor hourly rates, material costs and any local permits required for the San Diego concrete project.
Is concrete good for San Diego?
It is very easy for people to take the benefits of concrete in San Diego for granted. Most of the time, we overlook the importance that concrete has in the structures that we have at home. The reason for this is because, over the years, people have become so accustomed to using or seeing concrete to the point where it has basically become ...
What is Elite Concrete?
Elite Concrete is a local company serving all of San Diego since 2000. We offer a wide range in concrete construction. At Elite Custom Concrete we use the best materials available based on ease of ...
Who is Concrete Coating Specialists?
Concrete Coating Specialists, Inc. is a leading decorative concrete contractor in the San Diego area. We resurface and refinish pool decks, patios, driveway, basement, garage floor and other concrete ...
How much does concrete cost?
The average cost of concrete is $119 to $147 per cubic yard, which includes delivery up to 20 miles. Pouring plain concrete costs $5 to $10 per square foot depending on the quality, while colored, stamped, or stained concrete costs $8 to $18 per square foot to install.
How much is ready mix concrete?
Ready-mix concrete is pre-mixed in batches of 10 cubic yards or more and includes delivery up to 20 miles for $119 to $147 per cubic yard. The quality of ready-mix concrete is much higher than short load delivery because the concrete is precisely prepared at a mixing plant.
How much does a truckload of concrete cost?
One full truckload of concrete is about 10 cubic yards and costs between $1,169 and $1,444 depending on the PSI mix. Anything less than a full truckload is considered a short load which adds $53 per cubic yard to your final price.
How long does it take for a cement truck to deliver concrete?
When you order concrete, cement trucks don't drive from house to house making deliveries. If pre-mixed, each order of concrete is mixed specifically according to the requirements of the job. Once the concrete is mixed, the driver has about 90 minutes, or 300 rotations of the truck's barrel, to deliver that load before the cement starts to set.
How much concrete can a boom truck move?
Trailer mounted pumps can move 15 cubic yards of concrete per hour, while a boom truck can run 70 to 90 cubic yards per hour. When pumping with a boom truck, add in at least 1 hour for equipment setup and 1 hour for cleanup.
How much does it cost to install concrete edge forms?
Plywood forming with stakes, nails, and form oil is required to pour concrete. Concrete edge forms for driveways and sidewalks cost $2 to $3 per linear foot to install, while forms for foundation walls, building walls, and retaining walls cost $2.50 to $6.00 per square foot of contact area.
How much does it cost to install a 6" concrete slab?
A typical 6" thick concrete slab costs $5 to $10 per square foot depending on the concrete quality and project size. Decorative options such as coloring, stamping, patterns, or special finishes bring the total installation cost to $8 to $18 per square foot. However, most concrete jobs are measured in cubic yards instead of square feet.
Factors that Affect Concrete Patio Cost
It is important for homeowners to understand that decorative concrete does not have a flat rate. The price may vary due to a variety of factors, such as:
Have an old concrete patio in San Diego? Call (619) 443-2318 for a revamp
There is nothing more practical than to upgrade a patio through resurfacing. We at Concrete Coatings Specialists, Inc. have been in the business for over 30 years. Long enough to witness how resurfaced patios helped homeowners acquire a better patio without breaking the bank. Still in doubt? We’d love to show you some of our previous projects.
What factors affect the cost of concrete?
Factors that influence the cost of decorative concrete: 1 The number of colors used 2 The number of stamping textures used 3 The detail of the design (i.e. complicated patterns are expensive) 4 Special details such as embeds (common in countertops) 5 Specialty form or mold work (i.e. curves and unique shapes cost more) 6 Level of polishing
What is more expensive, concrete or stone?
Outdoors, asphalt, plain concrete and gravel are more affordable, while natural stone and pavers are more expensive. Indoors, laminates and ceramic tiles will cost less, while granite, marble and hardwood will cost more. Decorative concrete is great if you can afford to spend some extra money but don’t want to break the bank.
What are the factors that determine the price of concrete?
Some of these factors include the following: grading, subbase preparation, concrete forms and finishing, reinforcement, and the local cost of concrete.
What is decorative concrete?
Decorative concrete is a good option for homeowners that want a high-end look without the high-end price tag. Concrete is a versatile material that can be used for floors, countertops, patios, driveways and more. Techniques such as stamping, staining and polishing, can transform concrete to look like flagstone, marble or other expensive materials at a fraction of the cost.
What materials are used for concrete?
The typical materials used are concrete mix, forming supplies, texturing and coloring products, sealers, etc. Labor will vary depending on your project - its size, whether you have new or existing concrete, how detailed the decorative work will be and more.
What is needed to repair cracks in concrete?
Reinforcement is required because all concrete cracks, so if you want your cracks to remain small, you'll need reinforcement. Wire mesh, re-bar, plastic mesh, and fiber in the mix are all commonly used materials.
