How much does it cost to install beadboard ceiling?
Beadboard costs $0.50 to $1 per square foot and a contractor charges $4 to $6 per square foot to install it. It is remarkably versatile, allowing you to add aesthetic charm to indoor and outdoor spaces. Beadboard locks together with a tongue and groove joint compared to shiplap that uses a square shaped rabbet joint.
How much does beadboard ceiling cost?
How much does a sheet of beadboard cost? The average price is $1,325, or about $5.50 per square foot. Wainscoting can be as cheap as $1 per square foot if using MDF or plywood, or more than $40 per square foot if using an expensive solid wood.
How to install beadboard to a ceiling yourself?
Instructions
- Find and mark your ceiling joists on the walls with painter's tape.
- Create a "T" shaped support brace to help hold up your panel as you attach it to the ceiling.
- Cut your beadboard panel to size if needed and cut holes for any light fixtures.
- Apply construction adhesive to the back of the panel.
How to install bead board panel on a ceiling?
Tools:
- Tape measure
- Ladder
- Drywall lift (optional, but it’s a big help), ours is a 16′ model instead of an 11′ model for our vaulted ceilings
- Pry bar
- Laser level (optional but very helpful for lining up the boards)
- 16-gauge finish nailer
- Caulk gun
- Hammer and nail punch
- Stud finder, but more likely a Stud Buddy
- Chalk line or laser level and tripod
Are beadboard ceilings expensive?
Beadboard is relatively affordable, compared to other professionally installed ceiling treatments, such as tray ceilings, which can easily cost in excess of $10,000. DIY beadboard kit systems can be installed by a homeowner with basic carpentry knowledge.Apr 13, 2021
What is the cost of a beadboard ceiling?
A wooden beadboard ceiling costs $5 to $6 per square foot for materials and labor.
Is beadboard good for ceilings?
A beadboard ceiling can be used to level out an uneven ceiling by adding shims. Although beadboard is typically thought of as a wall material, it's great for ceilings as well, and it's relatively inexpensive. By using tongue and groove beadboard, you can hide the nails for cottage feel with a seamless look.
Is beadboard less expensive than drywall?
The least expensive option between drywall and beadboard is paneling, which is easier to install and less costly per-square foot. However, consider the quality prior to installation, as it sometimes is not worth the savings to have low quality drywall or beadboard.
How do you install a 4x8 sheet of beadboard on a ceiling?
0:226:33How to install bead board panel on a ceiling - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe way you do this thing is actually remote applying covering your surfaces applies on some waterMoreThe way you do this thing is actually remote applying covering your surfaces applies on some water with a spray bottle or spray tank and remove. In another video a lot of tissue have removing.
How do you attach beadboard to ceiling?
InstructionsFind and mark your ceiling joists on the walls with painter's tape.Create a "T" shaped support brace to help hold up your panel as you attach it to the ceiling.Cut your beadboard panel to size if needed and cut holes for any light fixtures.Apply construction adhesive to the back of the panel.More items...
What is the cheapest way to cover a ceiling?
Glue-On and Staple-On Ceilings If you're looking for an affordable option that's low maintenance and easy to install, consider a glue-on or staple-on ceiling. They're available in basic textures and elaborate designs and attach directly to the existing ceiling or onto furring strips attached to the ceiling.
Can you put beadboard paneling on the ceiling?
Beadboard planks are a decorative solution to easily camouflage damaged or outdated ceilings, such as popcorn or plaster. Install beadboard ceiling panels in the same direction as your floor boards for visual continuity. If you have ceiling beams, run the panels perpendicular to beams for an interesting twist.
How do you hide the seams on a beadboard ceiling?
How to hide seams in BeadboardMake sure beads and grooves line up. ... Attach beadboard firmly to surface. ... Apply wood putty. ... Clean wood putty out of grooves. ... Sand face and grooves. ... Decide if you can move forward or need to repeat a few steps. ... Prime. ... Paint.
What is cheaper shiplap or beadboard?
Beadboard is one of the least expensive wood panelings available – if you go with the premade 4'x8′ sheets. The cost for a 4'x8′ panel is about $0.72 per square foot, which is quite inexpensive, especially compared to some of the pricier options like wainscoting or shiplap.
Can you use beadboard instead of drywall for a ceiling?
Beadboard is a type of narrow paneling -- usually white, though many types can be painted -- that can be used as wainscoting on walls and even as a treatment for ceilings.May 31, 2020
Does beadboard have to go over drywall?
Beadboard installs over drywall with panel adhesive. While the adhesive cures, use brads or nails to hold the panels in place temporarily. Review scribing techniques: Because room corners are rarely plumb, it may be necessary to cut panels so that they conform to irregularities.Mar 9, 2021
How Much Does It Cost to Install Wainscoting or Beadboard?
The average cost of installing wainscoting is $16 per square foot. The price will change depending on the type of wainscoting selected. If you’re going with beadboard as your wainscoting, you will have to pay $13 for each square foot of it.
Which Is Cheapest to Install: Drywall or Beadboard? | Hunker
To determine whether drywall or beadboard is less costly to install the size of the area, consider material and labor costs. While beadboard is nice for dressing up a dining room, it is not sturdy enough for under the stairs, and may rattle when someone goes up and down the stairs.
Wainscoting - Wall Paneling - The Home Depot
5/16 in. x 5-29/32 in. x 32 in. - 8 lin. ft. MDF Overlapping Wainscot Interior Paneling Kit The House of Fara 8 Linear feet MDF Overlapping The House of Fara 8 Linear feet MDF Overlapping Wainscot Paneling is primed and ready for painting. This paneling kit will help you to create an 8 linear ft., (approximately) 36 in. tall, with base and chair rail, section of wainscot.
How much does beadboard cost?
It costs $1 per square foot for real wooden beadboard. Imitation versions cost $0.50 to $0.75 per square foot. You will need caps and baseboards to finish off both types of paneling. These cost $0.30 to $2.50 per foot and are sold in 10-foot sections.
What is the difference between beadboard and wainscoting?
Wainscoting is the main panel that covers an interior wall - typically the lower 3 to 5 feet - whereas beadboard is a type of wainscoting panel. They are frequently mistaken for being the same thing: Beadboard. Formed through interlocking tongue and groove panels placed side by side.
How much does a wainscot cost?
Wainscoting can be as cheap as $1 per square foot if using MDF or plywood, or more than $40 per square foot if using an expensive solid wood. Real wooden beadboard paneling costs $1 per square foot. Imitation types cost $0.50 to $0.75 per square foot. Wainscoting and beadboard are only as expensive as you make it.
How does beadboard work?
Beadboard works on the same joining mechanism but instead connects together larger prefabricated panels.
How much does drywall cost per square foot?
Drywall costs $1.60 to $2.35 per square foot and wood paneling is $1 to $40 per square foot depending on the type of material used. On certain projects, wood paneling and drywall complement each other.
How much does floor trim cost?
Material costs for floor trim are $1 to $2 and $3.50 to $8.50 per linear foot for labor and supplies. Also referred to as baseboard molding, floor trims serve to protect your paneled wainscoting from bangs and scrapes and to create a natural connection between the wall and floor.
How much does it cost to install wainscoting?
The average cost for installing wainscoting is $1,325 for a 12- by 12-foot room with 5-foot-high unpainted solid wood paneling (including materials and labor). This is the equivalent of $90 per hour or $5.52 per square foot. Simpler designs made from cheaper materials are faster to install.
What is beadboard on a ceiling?
Installing beadboard on your ceiling will transform the look of your entire setting. A ceiling is the largest visible surface in a room , its expanse broken only by a light fixture or fan. Beadboard draws the eye upward and creates visual texture.
How to make beadboard?
Here are the beadboard basics you need to know: 1 Pine is the most commonly used material in the creation of beadboard planks, which are approximately 5/16” thick, 3 ½” wide, and available in eight-foot lengths, such as these Hakwood Knotty Pine Beaded Planks (available from The Home Depot ). 2 Beadboard planks feature tongue and groove assembly, meaning one side of a plank has a tongue (protrusion) that runs the length of the plank, and the other side has a corresponding groove. When installed side-by-side this creates interlocking reinforcement that keeps the planks flat and even. 3 Pricewise, plan to spend approximately $1.50 per square foot (planks only) to cover a ceiling. Professional installation could add another $2 to $3.50 per square foot. 4 Though you may be familiar with installing tongue and groove hardwood planks on a floor, ceiling installation is more difficult, so you may wish to hire a pro. However, there’s a new (and more DIY-friendly) trend in beadboard ceiling planks—that runs $2.50 to $4.19 per square foot and is available in more than a dozen wood-tone shades—which we discuss further in the installation section.
What is beadboard?
Beadboards are flat planks with one or two “beads”—semi-circular, raised ridges—milled vertically into the face of the boards. When installed on a surface, it gives the appearance of two or three narrower boards side by side. Beadboard was traditionally used on the lower area of walls (i.e., wainscoting ), but it’s since become trendy for ceilings, ...
How does Armstrong beadboard work?
Armstrong’s WoodHaven Beadboard installs with special clips that attach directly to furring strips or joists without the need to blind nail each plank. The beadboard planks then slide right into the clips, which do not show from beneath. Installing each row of planks is a simple matter of attaching the clips and then sliding the planks into place. This creates a “floating ceiling” because the planks are held in place by the clips, not directly attaching them to joists or furring strips.
When did beadboard start to be used?
On interior ceilings, beadboard didn’t catch on in earnest until the 1950s, when it became a way to cover up old plaster with unsightly cracks. For country homes and farmhouses, beadboard was the updating material of choice, which is why it’s still associated with rural charm.
Is beadboard still popular?
Plus, it looked great! Beadboard remained popular through the Victorian era, but its appeal waned slightly during the Roaring Twenties when glamourous wallpaper came into vogue. Beadboard never completely disappeared, however, and still today it can be found in houses built in every decade of the past century.
Can you blind nailed beadboard?
Installing standard wood beadboard planks is challenging because each plank must be blind nailed to the ceiling joists, or to furring strips (boards installed on the ceiling perpendicular to the joists).
Recommended Products
As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.
Did you make this project?
Well, hanging a beadboard ceiling will cost more than leaving your existing ceiling alone, which would cost $0.
Where can you hang a beadboard ceiling?
Beadboard can hang anywhere! Bedrooms, hallways, or even bathroom ceilings are all great places to have bead boards installed.
What are other options for ceiling planks?
We also covered a ceiling in our home with tongue and groove cedar planks.
Which way should a beadboard ceiling run?
Best practices say that beadboard should hang perpendicular to the ceiling joists in your room.
Is beadboard water resistant?
Not all beadboard! Pay attention to the material that you select. PVC beadboard is water resistant.
What is the difference between beadboard and tongue and groove?
Beadboard is arranged in panels, while tongue and groove planks are individual boards. Both work great for hanging on ceilings!
Beadboard Characteristics
Beadboard paneling can give your home a certain je ne sais quoi. The vertical grooves can make any home look fresh and stylish. Swanky bungalow? Check. Country style cottage? Check. Breezy summer lake house? Check!
What Is the Difference Between Wainscoting and Beadboard?
Beadboard and wainscoting are practically one and the same. Some people even use the terms interchangeably, though there is a key distinction.
How to Install Beadboard Paneling
Hiring a pro to install your beadboard paneling for you will take less than a day, requiring little to no effort on your part. Plus, professionals come with the experience necessary to make your beadboard paneling look perfect.
1. Prep Your Space
You’ll need to pick out your paneling, measure the space where you’re installing it, and prep your walls or ceiling by dusting and cleaning them. Don’t forget to remove old baseboards and outlet covers, too.
2. Find Any Studs
Use a stud finder to locate studs in the area you’ll be installing the beadboard. The top and bottom of the paneling will be held in place by a cap rail and a baseboard nailed into the studs. Mark the studs with a pencil.
3. Apply the Beadboard
Make sure all of your wainscoting is the exact same length and begin gluing it to your wall or ceiling. Use construction adhesion and wood glue to help everything stick.
Pros and Cons of Beadboard Paneling
As with everything, beadboard paneling isn’t the go-to answer for everyone. Make sure you know the benefits (and setbacks) before adding it to your home.
