Receiving Helpdesk

how much does an iron staircase cost

by Daren VonRueden Published 3 years ago Updated 2 years ago

Most people pay between $700 and $4,600 for materials and labor. Plan with $50 to $120 per linear foot for materials, in addition to $300 to $1,000 per project for labor for a banister between 10 and 30 feet. You might only need 10 feet total for a two-step staircase, or 30 feet to encase a small porch.Jun 9, 2021

How much does it cost to have stairs built?

It costs the average homeowner $1,961 to build a staircase. This project ranges from $961 and $3,149 but can cost as low as $350 and as high as $5,000. However, you could pay up to $10,000 for more extensive or custom projects.

How much does it cost to install an iron railing?

You'll pay between $300 and $1,000 for labor to install a wrought iron railing between 10 and 30 feet in length, with an hourly rate between $60 to $100. Large projects are more expensive, as is custom metalwork. Your contractor will take longer and charge more if the railing is difficult to access.

Are metal railings expensive?

The average installed cost of metal deck railing made from steel is $45.00 per linear foot while cast iron railing runs about $100.00 per linear foot. If you buy parts and install the railings without pro help, the average costs are about $35.00 for steel and $85.00 for cast iron per linear foot.

How much do iron spindles cost?

Replacing wood balusters with new iron balusters is a great way to update your space. It is also surprisingly inexpensive! I did a TON of research and the cheapest place to buy iron balusters is on eBay! Be prepared to spend between $3 and $13 per baluster.

Are wood or iron balusters cheaper?

Wooden Balusters are typically more expensive than the average Iron Baluster. They are also more susceptible to damage over a long period of time and may require more maintenance. That being said, they do not lack in style and elegance.

How do you install wrought iron stair railings?

5:427:15How To Install Iron Balusters - YouTubeYouTubeStart of suggested clipEnd of suggested clipPercent beginning first with the bottom trim. And then inside your handrail. It is helpful to add aMorePercent beginning first with the bottom trim. And then inside your handrail. It is helpful to add a small dab of epoxy. On top of the baluster as well then slide the baluster.

Which is better iron railing or steel?

Carbon makes steel a little stronger than wrought iron, which can help it withstand the elements and resist damage. Wrought iron, though, is more naturally resistant to shock and vibration, which counteracts the softness of the metal.

Which is better iron railing or steel railing?

Wrought iron railings are much stronger than other common materials like wood; Hence often used for security fences. Durable and long-lasting. Easy to maintain if painted. Elastic and malleable, can be teased into flexible ornamental designs.

Is aluminum railing cheaper than iron?

Aluminum is not only wide-spread but it's also cheaper than most materials. You can get a better deal on an aluminum deck railing system than wrought iron or steel.

How much do stair spindles cost?

Replacing balusters (also called spindles) typically costs anywhere from $1,200 to $1,600. Putting in a handrail will likely cost anywhere from $700 to $2,500.

Is wrought iron solid or hollow?

Solid Iron Balusters are made from a low-grade iron called “wrought iron”. Even though the iron is a low grade because they are solid iron they are very strong and durable.

How do you replace iron stair railings?

How to Replace an Interior Metal RailRemove the screws or bolts that hold the railing in position, using a drill. ... Cut off any wall anchors that extend past the surface of the floor or stairs, using a reciprocating saw equipped with a metal-cutting blade.Place the new railing into position.More items...

What is the handrail on a railing?

In addition to the railings, you also need to consider the handrail. The handrail 1 is the section of the railings on the top where you place your hand for support or to guide you. Handrails come in two main types.

What are handrails made of?

Most wall-mounted handrails 1 are made from wood, but more material options are becoming available. Many owners of modern homes who favor industrial or contemporary styles opt for metal handrails, which offer a sleek, clean aesthetic and are mounted on the walls. There are also glass handrails, which tend to be expensive but stylish. In terms of costs, wood is the cheapest material, followed by metal, and then glass. The exact costs per linear foot depend on the form and structure of each handrail.

How much does wrought iron cost per linear foot?

It is a popular choice for circular or spiral staircases due to its elegant appearance, costing between $50 and $300 per linear foot, depending on the style.

How much does it cost to install glass stairs?

Glass stairs cost between $150 and $250 per step, and you need to add about $100 to $500 to the total staircase cost if you want LED lights installed.

How much does a wooden stair rail cost?

It is aesthetically pleasing and matches well with a wooden staircase. Wood stair railings usually cost $10 to $40 per linear foot.

What factors influence the cost of a staircase?

One factor influencing the cost of a staircase is location . The main stairs in a home leading from one floor to the next come at a much higher price than a simple set of unfinished basement stairs. The table below shows several common stair locations and average costs:

Why are stairs important?

Staircases are an essential element in any home with multiple floors. They allow homeowners and guests to climb from one floor to another and provide access to attics and basements. Aside from functionality, staircases are also decorative and available in a range of styles and materials.

How much does it cost to build a stairway?

When using steel materials, the cost to build stairs is just $1,000 to $4,400. These stairways are most often sold as full kits in a variety of styles. Some even have wood treads that beautifully contrast the metal materials.

How much does Trex cost?

Trex. When built using Trex, your stairs will cost $4,000 to $8,000. This composite material is often used to replace wood stairs and railings. For that reason, it works great outdoors and looks good inside, too.

What wood is used for stairs?

At the low end of the range are stairs made from oak, pine , and other basic wood varieties. High-end wood, such as walnut and mahogany, can drive up the final price considerably. You can either buy a kit or have a stair company design and install a custom build.

How much does a glass staircase cost?

Glass staircases come with a $2,500 to $20,000 price tag. They often use wood or metal materials for the railings, balusters, and supports. When sold as a kit, it includes the price of cable railings.

Is metal staircase cheaper than wood?

Metal is a bit cheaper since it is easier to form and comes in a variety of prefab kits. Wood is the top choice for custom builds, however. Unless made from aluminum or wrought iron, metal staircases are typically indoors.

How much does it cost to install wrought iron railings?

On average, the cost to install wrought iron railings is $2,600. Most people pay between $700 and $4,600 for materials and labor. Plan with $50 to $120 per linear foot for materials, in addition to $300 to $1,000 per project for labor for a banister between 10 and 30 feet. You might only need 10 feet total for a two-step staircase, ...

How much does it cost to replace a spindle railing?

Replacing spindles in your railing falls between $260 and $2,000. That includes $130 to $1,600 per spindle, and $130 to $400 for labor. It's an option if you only want to replace the balusters for added durability and style.

Why do stairs need banisters?

Staircases need banisters for extra safety. Your costs will be higher if you attach it to the bottom of the stair instead of the wall next to it. Installing your railings alongside the staircase against the wall can save installation budget.

How much does a wood banister cost?

Wood railing costs between $15 and $25 per linear foot , significantly less than the $50 to $100 for custom metal. However, it requires more maintenance. You also sacrifice durability. The average wood banister, even when treated, lasts only about 10 years.

What to consider when replacing a banister?

Factors to Consider When Replacing. If the banister is part of a larger structure, parts of it might be load-bearing. For instance, the baluster may support the porch roof. In that case, replacement is more complex, and will cost more. Another factor is the ground that will hold the railing.

What are some alternatives to iron railings?

The high cost of iron railings may cause you to look for alternatives. Cable rails, steep post banisters, and aluminum are all options to consider. Here's what you need to know about each:

How many feet does a two step staircase need?

You might only need 10 feet total for a two-step staircase, or 30 feet to encase a small porch. Materials include the price for the balusters (also known as spindles), decorative posts at each end that support the handrail. It also includes the handrails, bottom rails, and any hardware needed for installation.

What are the pieces of wood that make up the back of stairs?

Staircase makeovers can involve replacing some or all of the following: Treads and risers - Treads are the part of the stair that you step on, and risers are the pieces of wood that make up the back of the stairs. Handrails - The railings that you hold onto when using the stairs.

What is a staircase renovation?

A staircase renovation can involve replacing all or some of the staircase components, refinishing existing wood or a combination of replacement and refinishing. The extent of the project depends on the condition of the staircase and the look you desire, but the ultimate goal is to beautify and refresh one of your home’s most noticeable features.

What are balusters made of?

These can be made of several materials, including wood or iron. If you have the treads replaced, you’ll also have to replace the balusters. Shoes - Small pieces that are attached to the bottom (and sometimes the top) of balusters to disguise the hole that’s cut for balusters.

Can a company promise you the world?

Any company can promise you the world, but you want to make sure the company can actually deliver on that promise. Ask what the company is doing to make sure the stairs are up to local code requirements. Code requirements are in place for safety, and a staircase that doesn’t meet those requirements is dangerous.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9