Full Answer
How much does it cost to run a tanning bed?
In fact, when used by no more than one to two individuals (even on a daily basis), the cost of operating a tanning bed is quite minimal--usually between fifty cents to one dollar per use, a far less cost than the $6 to $12 typically charged by tanning salons.
Do tanning beds need electricity?
Basically a tanning bed is a large lamp fixture that requires electricity just like other lights. When purchasing a tanning bed for your home it is important to determine how you will power it.
Is a tanning bed 120 volt or 220 volt?
120 Volt vs. 220 Volt Most houses are wired with 120 Volt, 15Amp outlets and the typical tanning bed is 220 Volts, much like an electric dryer. It is very important to determine and provide the proper power for your home tanning bed.
Is there a plug for the tanning beds?
No plug is supplied for these beds. An electrician must wire them into a junction box or buck-booster in the room with the tanning bed.
How much electric does a home tanning bed use?
But as the beds get larger, they need more power. The Wolff 24 and the XS Power 24 still run on 120 Volts, but require a 20Amp circuit. The standard for tanning beds is 220 Volts, much like an electric dryer or oven range. It is very important to provide the proper power for your home tanning bed.Dec 30, 2015
How much energy does a tanning bed use?
Typically using 200W lamps that use an estimated 1 Amp of electrical current, the average 40-tube commercial sunbed uses about 40 Amps, roughly equivalent to 9.6kW.Jul 14, 2021
Is it expensive to run a sunbed?
A 'unit' of electricity is 1 kilowatt hour, i.e. equivalent to running a 1000 Watt appliance for 1 hour, and costs around 8p. A 40 tube 200 watt sunbed uses 9.6 kilowatts so would cost around 77p to run for an hour.
What is 10 minutes on a sunbed equivalent to?
This means that to achieve the same results as being in the sun, you won't need to be in the sunbed for nearly as long. A good example of just how different the results are taking into account that ten minutes in a sunbed compares to about 2 hours in direct sunlight.
How long does tanning bed tan last?
Generally speaking, tans will last up to 7 to 10 days before skin starts to naturally exfoliate and regenerate. If you exfoliate your body before tanning, use a tan extender, and keep skin moisturized your tan may last longer than anticipated.Oct 9, 2019
Can you plug a tanning bed into a regular outlet?
It is suggested by tanning bed manufacturers to keep one bed on its own individual circuit breaker or they will likely trip the breaker causing you other problems. The power sources most likely needed to power your home tanning bed will be one of the three NEMA 5-15R, NEMA 5-20R, or NEMA 6-20R receptacles.Mar 8, 2019
Are sunbed shops profitable?
Since there's a lot of competition already on the market, many people wonder if it's still profitable to open another sunbed salon. The answer is yes, but only if you carefully plan ahead and pay attention to the details.Mar 15, 2019
Is a tanning salon a good investment?
How much profit can a tanning salon make? Your business' profit is directly tied to the number of beds you maintain and how often those rooms are filled. On average, each room should generate between $12,000 - $15,000 annually. Each visit will cost you $6 - $9 in supplies and energy costs.Sep 9, 2021
How often should you use sunbeds?
Moderate tanning of 2-3 sessions a week is OK for everyone else but ensure you rest the skin for a minimum of 24 hours between each session and at least 48 hours for skin type 2. The European Standard advises not to exceed 60 sessions per annum.
Will 6 minutes on a sunbed do anything?
You are likely to see results relatively quickly Do not spend more than a total of 6 minutes in any one session. The Tropical Fruit, Watermelon, Cocoa Butter, or Carrot tan accelerators are all excellent for your skin type.
Should I shower before or after tanning bed?
It's best to shower, shave and exfoliate a day or two before your tanning session. Exfoliating helps prepare your skin before you tan. If you don't have time for a deep exfoliation, using a loofah, brush or bath puff during shower time works just fine.
Do tanning beds help with depression?
The stronger UV light allows for shorter and quicker tans, but always causes skin damage and ups your risk of developing skin cancer. Bottom line, tanning does not work for seasonal depression, and in fact causes more harm than good in the long run.Apr 16, 2021
How much electricity does a tanning bed use?
Although many people may think otherwise, a tanning bed requires little more electricity than your average kitchen appliance (usually 120 to 220 volts). In fact, when used by no more than one to two individuals (even on a daily basis), the cost of operating a tanning bed is quite minimal--usually between fifty cents to one dollar per use, ...
How much does an indoor tanning bed cost?
On average, a standard indoor tanning bed will cost between $1500 and $3000, but depending on the specific model, can cost much more. Although most companies offer financing, because they are considered a luxury item, the interest rate can be rather high.
Why are tanning beds used?
Used to help treat diseases such as calcium deficiency, the machines helped the body produce vitamin D and absorb calcium. Tanning beds remained in use for health purposes until the early 1970s, when people began to desire golden, tanned skin.
Do tanning beds need space?
As a result, most people who live in apartments and other small residences may not have adequate space to properly store a tanning bed.
Is tanning bed good for sun?
Despite the health risks associated with sun damage, tanned skin is often associated with health and beauty. As a result, many people across the world long for a luminous, glowing tan. However, since sunny weather is not always an option, tanning beds have become increasingly popular. Just as the sun emits UV radiation that causes ...
How much electricity does a tanning bed use?
When purchasing a tanning bed for your home it is important to determine how you will power it. 120 Volt vs. 220 Volt.
What voltage should I use for a tanning bed?
It is important to get an accurate voltage reading at the bed. Typically tanning beds perform best with voltage between 220V and 240V. For that reason you must get an accurate voltage reading where the tanning bed will be placed.
Do tanning beds run on electricity?
It is very important to determine and provide the proper power for your home tanning bed. A tanning bed may be compared to a large appliance with regards to power requirements, however it will not run as long nor as often as other appliances. The actual impact to your electric bill is quite minimal.
Do you need a dedicated circuit for a tanning bed?
The fact the most houses are not wired with a dedicated circuit and the only 220V circuit powers the dryer it is necessary that a dedicated circuit be added. This will require you to hire a certified electrician to install the correct outlet and wire as specified for your tanning bed.
