Cost of Concrete Sidewalk
| Concrete Sidewalk Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Concrete Sidewalk – Material Prices | $130.00 - $155.00 | $160.00 - $165.00 | $170.00 - $175.00 |
| Concrete Sidewalk – Installation Cost | $325.00 - $335.00 | $350.00 - $365.00 | $370.00 - $390.00 |
| Concrete Sidewalk – Total | $455.00 - $490.00 | $510.00 - $530.00 | $540.00 - $565.00 |
Full Answer
How much does a stamped concrete walkway or sidewalk cost?
Stamped Concrete Cost. Basic stamped concrete costs between $8 and $12 per square foot, but more involved projects can be as expensive as $18 per square foot. How much you'll pay for stamped concrete varies widely, depending on the prices for materials and labor in your local market and the complexity of the job.
How much should shoveling a driveway cost?
- The total amount of space that the driveway takes up.
- Whether or not you’re going to hire a contractor or a company.
- How many days of work it will take.
- The material that you will use for your driveway.
- The local price of driveway materials.
- The type of driveway that you decide upon.
- The condition of the site.
- Whether landing clearing is required or not.
How much does it cost to put in a driveway?
New Concrete Driveway Cost Factors
- Land excavation prices are about $0.50 to $1.50 per square foot.
- Brick or stone borders add an average cost of $6 to $15 per linear foot.
- Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot.
- Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does a stained concrete driveway cost?
The cost of a stained concrete driveway ranges from between $4 per square foot to $10 per square foot for a basic design. If you want it sealed, it will cost a little extra. Acid-based stains contain hydrochloric acid and metallic salts. These elements react with the calcium hydroxide in the concrete to produce coloring.
How much does it cost to pour a walkway?
Most U.S. homeowners pay between $6 and $12 per square foot for installation of a new concrete walkway. Prices can go beyond this if significant grading is required or a complex decorative finish is requested. Get estimates for your concrete walkway from contractors near you.
How do you calculate a sidewalk?
To calculate what you need, multiply the walkway's width and length to find the square footage; for example a 4-foot-wide, 50-foot-long walkway covers 200 square feet. Next, factor in the thickness: 4 inches converts to 0.33 feet; multiply this by the square footage to find the cubic feet: 200 x 0.33 = 66 cubic feet.
How wide is an average sidewalk?
48 inchesSidewalks should be wide enough to allow two adults to walk comfortably next to each other. A good standard width is 48 inches. Learn more about walkway widths.
What is the life of a concrete sidewalk?
If best practices are followed, the expected sidewalk materials service life can be as long as: Concrete: Approximately 80 years. Bricks and interlocking concrete pavers: Approximately 80 years. Asphalt: Approximately 40 years.
How much does it cost to pour a 8x8 concrete slab?
A typical concrete slab will cost between $113 and $126 per cubic yard (27 cubic feet) or $5.35 to $6.17 per square foot on average....Concrete Slab Prices By Size.Slab SizeSquare FeetAverage Cost Installed8x864$39510x10100$61712x12144$88815x15225$1,3886 more rows
How do you figure yards of concrete for a sidewalk?
How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards.
What is the sidewalk rule?
The sidewalk rule is the idea that when your significant other walks next to you on the sidewalk they walk on the nearest to the street. So if you're walking on the side by the cars, he'll gently scoot you over to the “correct” side.
How big is a slab of sidewalk?
Sidewalks should be at least 4" (100mm) in thickness. Simple slabs for small foundations, bases, etc., normally 4" to 6" (100mm to150mm) thick, depending on the load they must bear. Slope the walk away from buildings to provide proper drainage.
What type of concrete is used for sidewalks?
QUIKRETE® Concrete Mix is a good general-purpose mix for sidewalk and slab work.
Did the Romans have concrete?
Concrete was the Roman Empire's construction material of choice. It was used in monuments such as the Pantheon in Rome as well as in wharves, breakwaters and other harbor structures. Of particular interest to the research team was how Roman's underwater concrete endured the unforgiving saltwater environment.
Does concrete weaken over time?
The deterioration occurs because the by-product of this electrochemical process (rust) takes up many times the volume of the original uncorroded steel. The resulting pressure created inside the concrete will cause cracking and severe deterioration to the structure over time.
How do you make concrete last forever?
3:026:11Building a Concrete Slab to Last Forever - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain with that tape this vapor barrier prevents moisture from below getting into the slab. And thenMoreAgain with that tape this vapor barrier prevents moisture from below getting into the slab. And then into the house once we have the slab poured. We have to protect it.
How much does it cost to install a sidewalk?
Average Cost to Install Sidewalk. On average, $1,800 will cover the cost to install a sidewalk with a brushed finish. The total expenses are split between labor and materials. Most of the price is labor since it takes about 18 hours to install a 200 square foot pathway.
How to find square feet of sidewalk?
To find the total linear feet, just measure along the length of the sidewalk. Then, multiply the linear feet by the width of the path to get the total square feet of your project. Measuring sidewalk costs per linear foot is used least often, as it is usually reserved for flooring projects.
How much does a concrete walkway cost?
A concrete walkway costs $1,800 on average. Homeowners can expect to pay between $6 to $12 per square foot, or $1,200 to $2,400 for a 200 square foot walkway. The final price depends on its shape, thickness, design, finish and amount of prep work needed.
How much does it cost to remove a pathway?
Removal of an existing pathway costs between $535 to $1,510. This price varies due to its size, location and condition. The type of material used for its build can impact concrete removal rates as well.
How much does a contractor charge for concrete?
Contractors charge around $75 per hour for their services. The rest covers the cost of concrete and its delivery to the worksite plus any needed support materials. When made at least four inches thick, a 200 square foot walkway requires 2.5 cubic yards of concrete. You should order 15 percent more than you need, however, ...
Other considerations and costs
These prices are for service in the immediate service area of the provider.
DIY considerations
This project is somewhat suitable for DIY with a good set of tools and skills.
How much does it cost to install a sidewalk?
The average installation cost for a concrete sidewalk is approximately $1,800. On the low end, you could pay closer to between $729 and $900, and on the high end, be prepared to pay around $2,400 or more. Much of the cost depends on the size of your sidewalk and what type of material you choose.
How much does it cost to install a sidewalk in zip code 23917?
For your project in zip code 23917 with these options, the cost to install a concrete sidewalk starts at $7.18-$8.68 per square foot. Your actual price will depend on job size, conditions, finish options you choose.
How much does a flagstone walkway cost?
The cost for flagstone varies depending on the quality, but the average price ranges between $15 to $25 per square foot. If you want to install a concrete driveway in addition to your sidewalk, the contractor will pour a separate slab.
Why is my concrete sidewalk buckled?
As the temperatures fluctuate, concrete can shrink and swell which will eventually lead to cracks. Tree roots are another common culprit that can cause your concrete sidewalk to buckle or show signs of damage.
How much does it cost to install a concrete driveway?
This project can cost you anywhere from $2,200 to $5,000. You can also opt to use asphalt instead of concrete for a driveway.
How thick is a concrete sidewalk?
The typical concrete sidewalk is approximately 3 to 4 inches thick. A wire mesh or rebar is also added to reinforce and strengthen the sidewalk. Aggregate like sand is also mixed into the concrete to give it more strength and durability. All of this labor should cost about $36 per hour, on average.
How much does asphalt cost per square foot?
Asphalt concrete. Asphalt is an economical choice for a sidewalk with a lifespan of around 30 years. The cost for this material averages approximately $10 per square foot, but it also costs less in labor to install it.
How Much Does a Concrete Sidewalk Cost?
Most homeowners pay $8.63 per square foot for concrete sidewalk installation. But not every concrete sidewalk is the same. Prices typically range between $5.89 and $12 per square foot, depending on the details of the projects.
Cost Estimator by Size
Most concrete professionals charge by the square foot to account for material costs and labor. The greater your sidewalk’s square footage, the more your project will cost.
Other Factors That Affect Cost
Your sidewalk’s size plays a significant role in your total bill, but it’s not the only item affecting costs. The sidewalk’s thickness, shape, and grade of concrete will also impact the bill.
Extra Services
Want to make your new concrete walkway shine in the landscape? Decorative mulch and flower beds will give it a charming appeal, and outdoor landscape lighting can accentuate its details at night.
Cost of Concrete Sidewalks Across the U.S
All prices listed in this cost guide are national averages. Depending on where you live, prices may vary due to accessibility to concrete and how far delivery trucks must drive. This pricing guide is a helpful tool for calculating average cost estimates, but prices may vary on a local scale.
DIY Concrete Sidewalk
Pouring concrete can be a difficult DIY project if you’re unfamiliar with the material. Pouring a sidewalk is a labor-intensive job, and it requires good timing.
Conclusion
A concrete sidewalk in the yard provides a safe path of travel and helps keep foot traffic away from your flowers and turf. Hire a pro to pour your concrete walkway for you or turn it into a DIY project if you’re familiar with concrete.
Concrete Sidewalk Cost Per Square Foot
According to RemodelingExpense.com, a concrete sidewalk costs between $4.75 and $5.50 per square foot on average. Many contractors offer a sidewalk cost calculator that’ll help you work out how much your sidewalk will cost in total.
How Much Does It Cost to Pour a 12x12 Concrete Slab?
Concrete walkway costs vary depending on where you live and whether you want stamped concrete or a simple sidewalk replacement. The national average for a 12-foot by 12-foot concrete sidewalk installed by a contractor is between $680 and $800.
How Much Does It Cost to Pour 200 Square Feet of Concrete?
Assuming an average cost of $5 per square foot, it would cost around $1,000 to have 200 square feet of concrete poured. You can expect to pay a little more than the national average if you want stamped concrete with a fancier appearance.
Caring for Your New Sidewalk
Concrete is durable and hardwearing, but it can become cracked and start to break if weeds are allowed to grow up or if you have a lot of ice build-up in the winter. Taking the time to de-ice your driveway during the coldest months is an important maintenance task.
How much does a concrete path cost?
New South Wales and Western Australia have the highest concreting costs among all the states. Concreting jobs in New South Wales roughly cost $41.75/m2, while concreting services in Western Australia are at around $42.07/m2. However, the concreting prices in Australia can reach even $60 per square metre.
Does a concrete sidewalk need rebar?
Do Sidewalks Need Rebar? Most sidewalks don’t need to be reinforced with rebar. Rebar is a steel bar used to reinforce the strength of concrete used to withstand heavy weight. General use sidewalks don’t benefit from the addition of rebar.
Are sidewalks cement or concrete?
Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. Therefore, there is no such thing as a cement sidewalk, or a cement mixer; the proper terms are concrete sidewalk and concrete mixer.
Is it cheaper to pour concrete yourself?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.
Is it cheaper to buy premixed concrete?
It’s cheaper to do all the prep and buy the concrete premixed and delivered. For example, a 10×20′ slab of 4″ concrete would be a minimum of 2.5-3 yards. Here concrete is about $80/yard (closer to $70), or $240 for the concrete. That same slab would take 223 40-pound bags, or 112 80-pound bags.
How many 80lb bags of concrete make a yard?
how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.
Can I use quikrete for a sidewalk?
QUIKRETE ® Concrete Mix is a good general-purpose mix for sidewalk and slab work. Sidewalks should be at least 4″ in thickness. Simple slabs for small foundations, bases, etc., normally 4″ to 6″ thick, depending on the load they must bear. Slope the walk away from buildings to provide proper drainage.
