How much does a generlink transfer switch cost?
Aug 13, 2018 · For just the GenerLink, the costs, based on the factors above, can range anywhere from $650 for a 30-amp mounted transfer switch to as much as $900+ for a 40-amp meter mounted transfer switch with 75kA per phase surge protection.
Is generlinks worth the price?
Apr 01, 2020 · The Generlink itself costs between $600-800 depending on the features and specs, so the cost of the actual unit makes up for about half of the total cost including installation. Popular Trending
How to install generlink?
average GenerLink setup & install. Below. GenerLink Device (30 or 40-amp) Cost Changes. Depending on model. GenerLink Power Cord . Cost Changes. Depending on length . of cord required. Professional Install. TBD. Electrical . Permit/Inspection . TBD. TotaL GenerLink Cost Including Labor $1,650 - $2,000 Depending on exact nEeds
Is the generlink a quality unit?
Dec 23, 2020 · The Generlink itself costs between $600-800 depending on the features and specs, so the cost of the actual unit makes up for about half of the total cost including installation. Is the price worth the convenience? If you ask us and people who have installed the Generlink, yes absolutely.
Can a homeowner install a GenerLink?
Thousands of homeowners have already installed a Generlink and are enjoying the benefits and convenience of being able to power their homes with an alternative power source. When emergencies arise and the power goes out, you'll be glad you installed a Generlink too.Sep 17, 2018
What is the cost to install GenerLink?
GenerLink System: The GenerLink system is available at a cost of $1,097.25*. It is installed and maintained by EQUS for a monthly fee of $10.28*, which covers maintenance and replacement costs. GenerLink is designed as an alternative to expensive transfer switches and hazardous extension cords.
What states allow GenerLink?
Some known states where GenerLink is legal: Ohio, Kentucky, Tennessee, Indiana, Georgia, Maine, Illinois, Idaho, Alabama, New Hampshire, Michigan, Montana, Wyoming, Vermont, Massachusetts, Wisconsin, New Mexico, Arizona, Utah, Nevada, and Florida.
Who installs GenerLink?
utility technicianGenerLink is installed outside your home at the electric meter in less than 30 minutes by a utility technician. And, in most cases, you do not need to be at home for the GenerLink installation.
Is GenerLink CSA approved?
The GenerLink system, a plug-in installed on a home's power mast allowing a personal generator to power a home during an electrical outage, has been approved by the province's chief electrical officer.May 9, 2017
How does a GenerLink transfer switch work?
When the Power is out from the Utility Lines the GenerLink automatically transfers from the Utility lines to the GenerLink, when the generator is running. When the power comes back on it will not switch back to the utility lines until the generator runs out of gas or is turned off.Dec 22, 2011
How do I set up GenerLink?
0:164:18Generlink Transfer Switch Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this thing looks like a pretty easy setup it's just got the poles here that push into your meter.MoreSo this thing looks like a pretty easy setup it's just got the poles here that push into your meter.
Can you test GenerLink with power on?
Problem- Testing The GenerLink will not transfer to the generator during testing with utility power present.Aug 17, 2016
Does GenerLink make 50 amp transfer switch?
L14-50 Straight: Delivers up to 50 amps of power to your home.
What is better interlock or transfer switch?
Compared to a transfer switch, which is limited to a particular number of circuits, an interlock kit allows you to run power from a generator to any circuit within the electrical panel. While this is good in theory, there's a risk of overloading the generator if it's not sized according to the load.Oct 18, 2019
How big a generator do I need to run my house?
With a generator rated at 5,000 to 7,500 watts, you can run even the most critical household equipment, including things such as refrigerator, freezer, well pump, and lighting circuits. A 7500-running watt generator can run all these appliances at once. For RV, a 3000-4000-watt generator will work great.Aug 24, 2020
Can I install a generator transfer switch myself?
Can I Install a Generator Transfer Switch Myself? Technically, yes, you can install a generator transfer switch on your own, assuming you have the necessary experience working with electronics and are comfortable doing it.Nov 20, 2021
How much does a GenerLink cost?
The cost of a GenerLink will depend on a few factors, including the amperage, which is based on the size of your generator (30 or 40 amps), which retailer it’s purchased from and in the case you need a professional help to install it, the scope of the project and your geographical region.
How does GenerLink work?
The GenerLink is a five-inch device which is installed behind your electrical meter, and when you connect your generator to the device, it will start up, automatically disconnecting your home from the electric utility grid, essentially preventing the possibility of any back feed, which can oftentimes, cause damage to electrical equipment and even cause harm.
Benefits
According to the company’s official website, they claim the following benefits:
Tips to know
Before you consider the purchase, refer to this official GenerLink PDF to see if your generator is compatible with the switch. To put it simply, if you already have a generator, you will want to see if it matches any of the connectors found here . If you do not have one of these connectors, then it cannot be used with the product.
Product Overview
The GenerLink is a plug and play transfer switch that gives the homeowner the ability to use anything in their electrical panel up to the capacity of the generator. The GenerLink is UL listed and is a safe way for homeowners to use a portable generator during an outage. It provides a great peace of mind.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Product Overview
The GenerLink is a plug and play transfer switch that gives the homeowner the ability to use anything in their electrical panel up to the capacity of the generator. The GenerLink is UL listed and is a safe way for homeowners to use a portable generator during an outage. It provides a great peace of mind.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
What is a Generlink Transfer Switch?
The Generlink transfer switch is mounted directly behind your electrical power meter. There is one connector on the underside of the transfer switch where you’ll connect your generator with a supplied power cord.
How Much Does the Generlink Cost?
Total costs for the Generlink, including installation fees, average around $1500. This may seem high, however the process is much less extensive than installing a traditional in home back-up power transfer switch.
Generlink Installation
Installation of the Generlink is very simple. However, you’ll be required to contact your electrical service provider to set up a time to connect/disconnect your meter from the main power grid. This is itself can vary in cost – some have reported upwards of $800.
What is the advantage of GenerLink?
The major advantage of GenerLink is that it eliminates the need for extension cords and the hazards that come attached. Most homeowners do not have a suitable power cord that runs long enough to connect a generator to the meter. Also, there is no specific extension cord for generators as all the extension cords support multiple power appliances.
How to connect a generator to a generator?
GenerLink follows a simple working mechanism. It safely connects your portable power generator to the main electrical supply. Here’s how: 1 Firstly, turn OFF the main electric supply by shutting down all the breakers in the breaker panel. 2 Get your GenerLok cord. Connect the female end to GenerLink and the male end to the generator. 3 Turn the generator’s circuit breaker OFF, then turn on your portable power generator by following the steps mentioned in the generator’s manual. 4 When the generator starts running, wait for 30 seconds and turn the circuit breaker of the generator ON. This delivers the power from the generator to GenerLink. 5 Keeping in mind the maximum wattage of your generator, turn ON the important breakers. Depending on your wattage, you can also turn on all the breakers in your home and use all the appliances.
Can you use 240 volts on a generator?
GenerLink makes sure that you can use full voltage. Hence, you are allowed to use all the heavy appliances such as those that require 120 or 240 volts, depending on your generator’s capacity. Be it a water heater, an electric motor, or a clothes dryer, etc., you can run these appliances on a rotation basis.
Is GenerLink a reliable switch?
GenerLink offers many benefits. It is a safe and reliable meter mounted transfer switch that acts as a means of interconnection between your generator and the electrical meter outside your home.
Does GenerLink have surge protection?
GenerLink allows you to add surge protection to your chosen model to protect your appliances from power surges. The Surge module offers 75kA/phase surge protection. Also, it comes with an alarm to notify when there’s a sudden power surge.
