What is the average cost of installing a driveway?
Driveway pavers cost $10 to $30 per square foot on average for materials and labor. The average cost to install a 24’ x 24’ (2-car) paver driveway is $5,700 to $17,200. A high-end block paving stone or brick driveway costs $25 to $50 per square foot or between $15,000 and $30,000.
What is the average cost to repair a driveway?
To confirm the integrity of a concrete driveway, hire a professional to address significant surface issues. The average cost to fix a concrete driveway ranges between $500-$1,100, with the average homeowner spending $800 to resurface a 250 square foot area, including labor and materials.
What is the average price of a concrete driveway?
The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range. A simple concrete driveway ranges between $4 and $7 per square foot.
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
How much will a driveway cost UK?
Based on the average driveway size of just 60m2 you could expect to pay around £2,106 for this, with installation and other materials on top. If you're looking for a modern twist on the traditional block paving, Marshalls Coppice is £28.02 per m2, costing around £1,883 to cover a driveway of 60m2.
Does a new driveway add value to a house?
The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value. The amount can be more for a larger home.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Do you need planning permission for a driveway UK?
Driveway Legislation in the UK Since 2008, anyone wanting to replace or install a driveway, patio or similar in a front garden needs to apply for planning permission unless: It's less than five square metres in size or. The material is permeable or.
What's cheaper block paving or tarmac?
Is tarmac cheaper than block paving? The simple answer here is “Yes!” Block paving is very labour intensive and a square metre of typical block pavers is far more expensive than the equivalent area of Tarmac. On average, the overall typical block paving driveway prices are between 5% and 10% more expensive than Tarmac.
What type of driveway adds most value?
Gravel driveways are one of the most cost-effective new driveway types. Other advantages of gravel driveways are that they are very cost-effective.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
What brings down property value?
Closure of facilities – public services, employment, amenities; if any of these services close, it could impact the value of your house as they're often appealing to buyers. Low school ratings – buyers pay to live in areas with good schools because they want their children to have access to the best education.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
What type of driveway is best?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
How much does it cost to install a gravel driveway?
Typical costs: A gravel driveway starts at roughly $0.75-$3 or more a square foot, or $300-$1,000 for a 12'x25' single-car driveway. Costs can double for a roadway-quality driveway. Loose gravel will need replenishing periodically, but a correctly designed, installed and maintained gravel driveway can last 50-100 years or more.
How long is a driveway?
Driveway length is typically a minimum of 20' per car. Because a driveway connects to a public street, there are often regulations governing the width of the driving and the materials used to build it. Typically a permit will be required, and permit fees can vary from nominal to pricey, depending on location.
How much does a macadam driveway cost?
Also called tar and chip or oil and stone, macadam driveway can cost $1-$3 or more a square foot on an existing driveway, or $600-$1,800 for 12'x50'; and $2-$4 or more a square foot for a completely new driveway with gravel base, or $1,200-$2,400 for 12'x50'. Macadam typically lasts 6-10 years and provides the decorative and rustic appearance ...
How wide is a single car driveway?
A typical single-car driveway is 9'-12' wide, and a two-car driveway is 20'-24' wide, according to LandscapingNetwork.com [ 1] ; 9'-wide can be a tight fit for delivery vans or trucks, while wider than 12' but less than 20' is too wide for a single vehicle and not wide enough for two. Driveway length is typically a minimum of 20' per car.
Who installs driveways?
Driveways are typically installed by asphalt, concrete, masonry or paving contractors, although general building or landscaping contractors make take on the task as part of a larger project, and sub out the work. Ask friends, neighbors or local construction companies for recommendations.
What is driveway used for?
A driveway is often the first thing that visitors see and the most-used outdoor area of a home, and is also key to the property's drainage. Depending on the materials used, a driveway can be utilitarian, like gravel, asphalt, or concrete, or decorative, like stamped asphalt, stamped concrete, or cobblestone. A gravel driveway starts ...
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot to install. A 12×25 (1-car) gravel driveway costs $300 to $900, and a 24×24 (2-car) driveway is $600 to $1,800. Costs depend on the size and depth, gravel type, soil conditions, labor, excavation, grading, permits, and optional grid stabilization.
How much does a white gravel driveway cost?
A white gravel driveway costs $2.77 to $4.80 per square foot, $30 to $120 per cubic yard, or $20 to $100 per ton for less-expensive white stones up to 1". A white rock driveway is available in crushed granite, white quartz blends, limestone, and sometimes pea gravel. White gravel shimmers in the light, and can cause a glare on sunny days.
How much does a caliche driveway cost?
A caliche driveway is $1.17 to $6.62 per cubic foot, which is $31 to $178 per cubic yard, or $48 to $253 per ton. The cheapest caliche is available near the deserts it comes from in the Southwestern United States.
How long does a gravel driveway last?
A gravel driveway with a well-built foundation can last for up to 100 years if well-maintained.
How much does gravel cost?
Gravel prices for a driveway range from $10 to $50 per ton or $15 to $75 per yard depending on the rock type, volume ordered, and delivery fees. When including delivery, spreading, and compacting, driveway stone and rock costs $100 to $120 per ton installed.
How much does it cost to build a crushed limestone driveway?
A crushed limestone driveway costs $1.50 to $2 per cubic foot , $40 to $54 per cubic yard, or $30 to $38 per ton for up to 1" stones. Crushed stone gravel can come in any color, though most popular crushed stone blends are in neutral, earth-toned colors.
How much does gravel cost per square foot?
White gravel shimmers in the light, and can cause a glare on sunny days. Black gravel driveway rocks from 0.50" to 1" in size cost $3 to $10 per square foot, $96 to $140 per cubic yard, or $76 to $85 per ton. Black lava rocks are the most common and affordable, while true-black granite chips are rare.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
How much does it cost to stamp a driveway?
A single-car driveway that’s 10 feet by 20 feet could cost $800 to $1,600, but a larger 24-foot by 24-foot driveway averages $2,300 to $4,600. If you choose to stamp decorative designs in the concrete, the costs will increase beyond those averages.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How much does it cost to build a driveway?
Land preparation costs can run from $450 to $8,500 or between $1.30 and $2 per square foot, with the average at $2,600. Tree removal costs between $80 and $1,650 or $660 on average. Stump removal can cost between $60 to $360 per stump or $2 to $4 per inch of diameter. If you need extensive land clearing to build the driveway, expect to pay around $400 an hour or between $500 and $3,000 per acre if it’s a heavily wooded location. Digging and excavating to install a gravel driveway can cost $1 to $2 per square foot, depending on the terrain and the condition of the land. Grading a gravel driveway can run between $4 and $8 per square foot, and the cost to grade and excavate an average-size driveway will cost around $700 to $2,500. Some installation companies may include grading and excavating costs in the overall price of a gravel driveway project. Be advised that they may charge extra to haul away the excavated dirt or move it to a different area on your request.
How much does a gravel driveway cost?
A gravel driveway costs as little as $300 or as much as $60,000 for an extra-long driveway . The average cost for a 16- by 38-foot gravel driveway is $1,500. A gravel driveway can be a functional, budget-friendly feature for any home. If you’re interested in an alternative to an asphalt or concrete driveway, gravel may be the way to go.
How much does pea gravel cost?
Crushed clamshells or plain pea gravel costs around $40 per cubic yard or $50 per ton. If you buy pea gravel in bulk, you may qualify for a discount. Crushed stone runs approximately $55 per cubic yard and $65 per ton. Colored gravel can add an extra $20 to $50 per unit.
What is the best gravel driveway base?
Along with base #1, base gravel #3 is considered one of the best gravel driveway bases. Item #4 is another standard base layer for gravel driveways. Item #4 is usually made of crushed gravel, dirt, and sand, but it can sometimes contain recycled asphalt, bluestone, or limestone. Item #4 costs between $12 and $22 a ton.
How to calculate the square footage of a driveway?
Multiply the length and the width of the driveway to find the square footage: 16 feet x 38 feet = 608 square feet. To find the total cubic feet, multiply the total depth (1 foot) by the area (608 square feet) to get the total volume of gravel needed (608 cubic feet).
Why does the price of a new gravel driveway change?
This price can change because of local labor costs, the difficulty of the job, and the geographic area. Labor rates typically include the cost of supplies and equipment, but check with your contractor. If the new gravel driveway is replacing a paved driveway, prepare to pay more for removal.
How much does gravel cost per square foot?
There are several different types of material for a driveway and the price can run between $0.40 and $2 per square foot. The gravel material is usually priced by the cubic yard or by the ton.