Cost Calculator
| Regular | Better | Best | |
| Material prices for Concrete slabs. | $2775.00 – $3075.00 | $3510.00 – $3840.00 | $3855.00 – $4335.00 |
| The Installation cost for Concrete slabs ... | $6750.00 – $8025.00 | $9675.00 – $14,400.00 | $16,200.00 – $19,425.00 |
| Total cost for Concrete slabs. | $9525.00 – $11,100.00 | $13,185.00 – $18,240.00 | $20,055.00 – $23,760.00 |
| Total Average Cost per square foot for c ... | $6.88 | $10.47 | $14.61 |
How much does it cost to build a concrete slab?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How much does it cost to pour a concrete slab?
Pouring a 10×10 concrete slab costs $685 to $950, a 12×12 slab for a patio costs $820 to $1,576, a 20×24 driveway slab costs $1,530 and $3,270, and a 24×24 slab for a garage costs $3,160 to $5,870. Factors That Increase Concrete Prices. Keep in mind that you total project cost for pouring concrete can increase depending on the following:
How much does a concrete slab for a shed cost?
Once you have the concrete base, you can build a shed, assemble a shed, or have a ready-made placed on it. But how much does a concrete slab for a shed cost? A concrete slab for a shed will cost between $4.00 and $5.00 a square foot assuming you do all the preparation work.
How many yards to gravel a 30x50 ft driveway?
Your project is going to be 10 feet wide by 50 feet long and 8″ of crushed stone is needed for the depth. Here is your workup. You would need to order 13 cubic yards of material for your project. Here is an example for how many tons of material you will need.
How much does it cost to pour a 40x60 slab?
Concrete Slab Prices By SizeSlab SizeSquare FeetAverage Cost Installed20x30600$3,70230x30900$5,55330x401200$7,40440x602400$14,8086 more rows
What is a fair price for concrete slab?
A concrete slab costs between $4.34 and $7.73 per square foot, with an average cost of $6.60 per square foot. The national average cost of a concrete slab is $6.60 per square foot for materials and labor. Most homeowners can expect to pay between $4.34 and $7.73 per square foot for concrete installation.
How much is a 50 slab?
Concrete slabs cost an average of $6 per square foot but may cost as much as $8 and as little as $4. A 50×50-foot concrete slab covers 2500 square feet, resulting in an average cost of $10,000 to $20,000.
How much should a 30 concrete slab cost?
Pouring a concrete slab may cost between $4 and $8 per square foot, with an average cost of $6 per square foot. Based on the national average, a 30×30 (900 square feet) concrete slab may cost about $5,400 (900 times 6 = 5,400).
How thick should my concrete slab be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.
How do you quote a concrete job?
Local ready-mix concrete suppliers can give you quotes once you define the project specifications and provide the job location. Concrete pricing is typically quoted per cubic yard or cubic meter (metre). For an average estimating number, you can use $77 per cubic yard.
Can you pour a concrete slab yourself?
For most do-it-yourselfers, the best material for building a concrete slab is a ready-mix crack-resistant concrete product. The wet mix is poured into a prepared wood form, then left to cure. After the concrete has hardened, the sides of the form are knocked off and the slab is ready to use.
How thick should a concrete patio be?
Four inchesFour inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.
How much does it cost to pour a concrete pad?
A slab of concrete typically costs about $4 per square foot for materials. On average, a concrete slab cost about $6 per square foot with labor. Including labor, the cost of a concrete pad can range between $4 and $8 per square foot. The average concrete pad measures around 30 feet by 30 feet.
How much concrete do I need for 30X50?
For a 30X50-foot slab, multiply 30 by 50 to get 1,500 square feet.
How much does it cost to pour a 30x40 slab?
How much does a 30×40 concrete slab cost? The average cost is $4 to $8 per square foot. The median price is about $6 per square foot. Based on these averages, you may pay $4,800 to $9,600 with a median estimate of $7,200.
How much does it cost to pour a 20x30 concrete slab?
The average cost of a 20×30 concrete slab is between $2,400 and $4,800. The median price is about $3,600. However, the thickness of the slab and other features may increase or lower the cost.
How much does a concrete slab cost?
Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Who gets better prices on concrete slabs?
Concrete Contractors or, Mason companies will most always get better prices on Concrete Slabs — saving your back and additional costs of Concrete Slabs materials, so shop around, ask your neighbors if they can recommend someone.
How much does a concrete slab cost?
Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That’s about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that’s 6 inches deep. Materials alone cost about $4 per cubic foot.
How much does a slab foundation cost?
A monolithic slab foundation costs between $4,600 and $20,000. Monolithic means pros pour the base of your house all at once. Your foundation should be able to keep moisture out of your house, protect you from the cold and safely hold your house up.
What is slab flatwork?
Slab flatwork is messy, complicated work. These types of jobs refer to your walkways, driveways and concrete floors. From demolition work to prep reinforcement to edging, each one of these jobs requires expertise and equipment most people don’t have available. You may save a couple thousand dollars on labor, but if the end result is a shoddy driveway or a floor that’s not properly reinforced, you could get yourself into a financial hole trying to fix the problem. Ultimately, concrete installation is very difficult unless you’re extremely experienced with DIY.
How thick is a concrete slab?
The thinnest a concrete slab can be is about 2 inches. The thicker the material, the stronger it is. Typically, a pro applies thin layers on an area like a walkway. Even though a thinner layer is cheaper, the cost to build a concrete walkway is largely determined by the size and length you prefer. Return to Top.
How much does it cost to epoxy a garage floor?
Some homeowners like to add an additional sealant for protection. The cost to coat concrete flooring with epoxy ranges from $1,430 to $2 ,960.
How long does it take to put concrete in a house?
It typically takes between 24 and 48 hours to install concrete. This is for an average residential project and includes the time it takes to pour the mix and let it dry enough that a person can walk across it without leaving a dent. Don’t put any heavy machinery on newly poured concrete.
How much does concrete cost per yard?
Concrete’s typically sold at about $110 per cubic yard. Here’s how to calculate what you’ll need for your project: Multiply the length of your project by the width and then by the depth. Divide by 27, the number of cubic feet in a cubic yard. Add 10 percent in case of spilling.
WHAT'S THE DIFFERENCE "CONCRETE SLAB VS CONCRETE FLOOR"?
A concrete slab is poured right on a gravel pad and the edges are formed with 2x4's, 2x6's, 2x8's etc.
Thinking of installing the slab yourself?
Hey, if you're thinking of installing your own concrete slab then check out my training course.
Basic concrete slab cost
I'll base my price on what my actual estimate would be to install a 6" thick concrete slab for one of my customers. Base cost for a 6" thick concrete slab -- $6.00 per square foot
What makes the cost go up
Common things that will add to the $6.00 per sq. ft. cost of a concrete slab 1. THICKER EDGES (from 12" - 2') ADD $1.00 to $2.00 PER SQUARE FOOT 2. VAPOR BARRIER UNDER SLAB - ADD $.50 PER SQUARE FOOT 3. 2 INCH STYROFOAM UNDER SLAB - ADD $2.00 PER SQUARE FOOT 4. WIRE MESH INSTEAD OF FIBERMESH - ADD $.35 PER SQUARE FOOT 5.
How much does concrete cost per square foot?
Across the US, homeowners report that ready – mix concrete costs about $98-99 per cubic yard.#N#The average cost of a concrete slab (6 inches thick) is $5.00-5.50 per square foot, including materials and labor. However, the price can go up to $9-10 per square foot depending on numerous factors and enhancement costs.
How much does stamped concrete cost?
Costs for stamped concrete vary greatly; starting at around $8 per square foot, all the way up to $20+ per square foot. Most homeowners pay a mid-range price ...
How much does a concrete overlay cost?
The average cost of this overlay starts at $3-5 per square foot, but can go up to as much as $12-15 per square foot depending on the complexity of colors and patterns you want.
What is the benefit of concrete pavement?
Another huge benefit is that concrete pavement requires minimal maintenance compared to other materials. To achieve a custom look, contractors use various types of colors such as stains and powered pigments, and combine them with an array of patterns and textures.
How Much Does A Concrete Slab Cost?
Additional Cost Factors
- Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80per square for materials and installation.
- Colored concrete will cost you an extra .75 – $1.25per square added to a basic concrete mix.
- Sub-base preparation – this runs on average .60 – $1.25 per square footand involves site-wo…
- Your standard concrete slab is normally a minimum of 4-6 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80per square for materials and installation.
- Colored concrete will cost you an extra .75 – $1.25per square added to a basic concrete mix.
- Sub-base preparation – this runs on average .60 – $1.25 per square footand involves site-work prep: Grading, compacting the top-grade, 2″x4″ or 2″x6″ wood forms, 3/4 crushed stone and installing wi...
- Concrete Mix – Concrete costs an average of $100 per cubic yardaccording to NRMCA
Concrete Slabs – Pricing and Installation Cost Checklist
- Expect the Concrete Slabs prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
- Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
- Try to budget and additional 7-15% more on top of what our calculator gives out for Concret…
- Expect the Concrete Slabs prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
- Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
- Try to budget and additional 7-15% more on top of what our calculator gives out for Concrete Slabs costs.
- Visit every supply house that sell your particular brand of Concrete Slabs and try to negotiate a better price with each supplier – I save on average 20%.