How do you convert cubic feet to gallons of water?
To convert a cubic foot measurement to a gallon measurement, multiply the volume by the conversion ratio. Since one cubic foot is equal to 7.480519 gallons, you can use this simple formula to convert: The volume in gallons is equal to the cubic feet multiplied by 7.480519.
How many gallons are in every square foot of water?
and 1 cubic foot of water equals 7.48 gallons of water , the equations would go something like this. Well if you have 500 sq. ft. that is 4 inches deep in water, you have 500 sq feet time . Click to see full answer. Thereof, how do you convert square feet into gallons? Measure the depth of the structure in which the water is located.
How many liters of water will one cubic foot hold?
The exact answer is that there are 3.048 x 3.048 x 3.048 liters in one cubic foot. This give a finite number of decimal places. That is 28.316846 liters in one cubic foot to six decimal places. It is not realistic to measure a liter to six decimal places. The volume of 28.32 lit
How to calculate gallons of water per square feet?
How many gallons of water will fit in a square foot?
- Measure the depth of the structure in which the water is located. Use a tape measure to do this.
- Multiply the depth in feet times the width and length of the pool (square footage) to find the cubic feet.
- Multiply the cubic feet by the amount of water per cubic foot, which is 7.48 gallons.
How do you convert cubic feet per second to GPM?
Multiply the number of cubic feet per second by 7.4805 to convert to gallons per second. For example, if you start with 42 cubic feet per second, multiply 42 by 7.4805 to get 314.181 gallons per second. Multiply the number of gallons per second by 60 to convert to gallons per minute.
How many GPM are in a cfs?
cfs= 448.8325660485*gpm.
How many gallons is a cubic foot of water?
7.48 gallonsThere are 7.48 gallons of water in one cubic foot of water. To convert gallons to cubic feet, divide the total gallons by 7.48.
What does 1 cfs look like?
One cubic foot per second (cfs) is equal to the discharge through a rectangular cross section, 1 foot wide by 1 foot deep, flowing at an average velocity of 1 foot per second. It is also approximately 7.48 gallons per second.
How many gallons are in a second foot?
Cubic feet per second (cfs): * 1 cubic foot per second = 7.4805 gallons flowing by a particular point in 1 second.
How do you convert GPM to velocity?
0:000:37Gallons per minute in a pipe to velocity - YouTubeYouTubeStart of suggested clipEnd of suggested clipHow do you convert GPM into velocity. Alright to do this you need to convert your GPM in to cubic.MoreHow do you convert GPM into velocity. Alright to do this you need to convert your GPM in to cubic. Feet you do that by x into five point one three three.
How much does 1 gallon of water weigh?
The answer is simple; a gallon of water weighs about 8.3 pounds. The imperial gallon of water is defined as 10.02 pounds at its maximum density while the weight of US dry gallon of water is defined as 9.71 pounds. However, the answer comes with a caveat. The weight per gallon of water fluctuates with temperature.
What does 1 cubic foot of water weigh?
62.43 poundsThe specific weight of water is 62.43 pounds (avoirdupois) per cubic foot. 62.43 pounds * 16 ounces = 998.88 ounces.
How many gallons is 8 cubic feet of water?
Cubic Foot to Gallon Conversion TableCubic FeetGallons5 ft³37.4 gal6 ft³44.88 gal7 ft³52.36 gal8 ft³59.84 gal36 more rows
What is the best cfs for fly fishing?
In small streams, a good flow is usually in the range of 100-200 CFS, while the range in larger streams is usually 1,000-2,000 CFS.
What is a fast river flow rate?
A moderately fast river flows at about 5 kilometers per hour (3 miles per hour), while fast streams during the floods exceed 25 kilometers per hour (15 miles per hour). One of the easiest ways to determine the surface speed of the river is to use your GPS on your boat, like any other moving vehicle.
What is ideal cfs for fly fishing?
700-1000 cfs – This level is the best of both worlds. There is plenty of water to float and you can wade the river nearly everywhere. At this level look for fish out of the main current.
What is cubic foot in water?
Cubic Foot – The volume of water that would be held in a container one foot wide by one foot long by one foot deep. Acre-lnch – The volume of water that would cover one acre (43,560 square feet) one inch deep. Acre-Foot – The volume of water that would cover one acre one foot deep.
How many gpm is a gallon per minute?
A flow of one cfs is approximately equal to either 450 gpm , one acre-inch per hour, or two acre-feet per day (24 hours).
What is the most commonly used measurement for irrigation water moving by gravity from streams and reservoirs?
Cubic feet per second, sometimes written second-feet (sec. ft. or cusec) is most commonly used for measuring flow of irrigation water moving by gravity from streams and reservoirs. Gallons per minute is most commonly used for measuring flow from pumps.
How to convert units in the first column to units in the second column?
To convert from the units in the first column to units in the second column multiply the value in the first unit by the factor provided in the third column. To go in opposite direction and convert from the units in the second column to units in the first column simply divide by the number in the third column.
What are the two conditions under which water is measured?
There are two conditions under which water is measured—water at rest and water in motion. Water at rest is measured in units of volume. Water in motion is measured in units of flow— unit of volume for a convenient time unit. It is important that the difference between a unit of volume and a unit of flow be kept in mind.
What is the most common mistake when working with water measurement units?
The most common mistake when working with water measurement units is to accidentally substitute one flow unit or volume unit for another without proper conversion.
