As a guide Fencing Essentials recommend the following, when deciding how many boards are needed: Allow 12 boards per metre when using 100mm boards. Allow 10 boards per metre when using 125mm boards. Allow 8 boards per metre when using 150mm boards.
How many feather edge boards do I need for a bay?
Continue to attach your feather edge boards along the length of your bay, taking care to keep them straight and ensuring the same amount of overlap is applied to each one. You should have approximately 30 boards per 3 metre bay. (10 per metre)
What are feather edge fence boards?
Feather edge fence boards are an ideal solution if you have an awkward space, or you can’t find a fence panel to fit. The closed design created by overlapping the boards ensures that there are no gaps, providing your property with excellent privacy levels.
What size nails do you use for feather edge boards?
Fitting Feather Edge Boards Use 50mm galvanised nails attach each slat to your top, middle and bottom arris rails, and remember to only use 3 nails per slat, top, middle and bottom. Do not nail two pales together.
Can you screw feather edge boards together?
Likewise, can you screw feather edge boards? Use 50mm galvanised nails to attach them-it is important you only use one nail per pale per rail (i.e. 3 nails) - do not nail two pales together. The single fixing is to allow the pales to expand and contract with the weather. As the top of the fence is continuous, capping can be any length.
How many feather edge panels do I need?
To work out how many feather edge is required you need to divide the total length of the fence by the width of the feather edge minus the overlap. The ovelap will need to be about 1" (25mm), so deduct this from the width of the feather edge, I:E 150mm - 25mm = 125mm.
How many feather edge boards do I need for a fence?
With featheredge fencing, there are 3 generic distances between posts, 1.8M, 2.7M and 3.0M. 100mm Featheredge boards are the most common size used and you should expect to use, 23 boards for a 1.8M panel. 35 boards for a 2.7M panel and 39 for a 3.0M panel. You should also think about adding a few extra just in case.
How many 150mm feather edge boards do I need?
150mm boards at usually stocked at 1.65 metres, 1.8 metres, 2.4 metres, 3.0 and 3.6 metres. With a 25mm lap you will need 8 boards per linear metre run of fence. Longer lengths of featheredge are generally used in cladding applications but may be cut to size by the customer where unusual heights of board are required.
How many Featheredge boards are in a meter?
As a guide Fencing Essentials recommend the following, when deciding how many boards are needed: Allow 12 boards per metre when using 100mm boards. Allow 10 boards per metre when using 125mm boards. Allow 8 boards per metre when using 150mm boards.
How far apart should feather edge fence overlap?
The overlapping of the feather edge cladding is very important and must be kept consistent. For boards less than 150mm wide an overlap of 40mm is ideal, but for boards wider than 150mm, 50mm overlap is recommended.
How many rails do I need for a 6 foot fence?
three railsAll fences will have a top and bottom rail. One general rule of thumb is to have a horizontal rail for every 24 inches in height. For a six-foot-high fence, this means three rails. While a middle rail may not be a structural necessity, it will help keep fence boards in place and may limit warping and twisting.
How much do you overlap 125mm feather edge boards?
25mmWell there is a British Standard for this believe it or not, which recommends a minimum of 18mm overlap between each board, however most fencing contractors and timber suppliers will recommend 25mm of overlap whether you are using 100mm, 125mm or 150mm feather edge boards, we agree with this and this is our ...
Can you feather edge both sides?
Yes it is possible to do. Best way to do this is to probably install v notch posts that the Aris rails than fit on too. Then on the other side just fit a cant rail and this gives you two sides to nail on too.
Can you screw feather edge boards?
The choice is yours. The rails can be screwed into the posts through the sides and supporting brackets can be used to give extra strength. 3 inch number 8 screws are usually needed for this, all timber should be treated. The first feather edge board can then be fixed on the outside of your fence.
How do I work out how many fence boards I need?
To calculate pickets, decide the width and spacing of your pickets. Add the width and the spacing together to get the combined width. Change the length of your fence to inches to match the picket measurements. Divide the fence length by the total picket width to get the number of pickets needed.
Where do you nail feather edge boards?
It is important not to reduce the recommended overlap. Feather-edge profiles are generally cut from green (wet) timber and will, as a result, shrink by up to 15mm as the board dries. We recommend that each board is fixed once with a nail located 10mm above the upper edge of the previous board.
How do I calculate fencing materials?
How to Calculate Fence Materials - Building with Preassembled PanelsNumber of Fence Panels = (Total Lineal Feet of Project – Gate Width) / Width of Fence Panel. ... Number of Posts = Number of Panels + 1 + Number of Gates. ... Number of Fence Sections = Total Lineal Feet / Width of each Fence Section.More items...•
How many bays are there in a Feather Edge Fencing?
Feather edge fencing is generally constructed in three metre bays, however shorter lengths can be constructed by simply cutting the final bay to the required overall length. To construct one 3m bay the following components are needed:
What is feather edge fencing?
Feather edge fencing is a popular, strong and attractive alternative to standard fence panels. With the right materials you can construct great looking close board fencing that will last you for years. The advantage of Feather Edge fencing is that it can be custom designed to suit any contours of your garden boundary.
What is the advantage of a feather edge fence?
The advantage of Feather Edge fencing is that it can be custom designed to suit any contours of your garden boundary. It is also more durable and stronger than using standard panels. Another advantage is that Feather Edge components are pressure treated thus helping to extend the life of your fence. Feather edge fencing is constructed using various ...