What’s the Average Toilet Tank Weight?
- TOTO Drake Tank with G-Max Flushing System – 39 lbs.
- American Standard Cadet Toilet Tank – 23-35 lbs. (Several tank models)
- Kohler 1.6 GPF Tank – 40 lbs.
- Mansfield Alto Toilet Tank – 31 lbs.
- Delta Faucet Haywood Tank – 35 lbs.
What is the standard size of a toilet tank?
What is the standard size of a toilet tank? Large toilet tanks range in size as well but typically measure from 16 3/4 inches to 18 inches wide. Click to see full answer. Similarly, you may ask, how wide is a standard toilet tank?
How to measure a toilet tank?
- Commercial Toilet Tank Fittings Market 2021-2026: The Global Commercial Toilet Tank Fittings market exhibits comprehensive information that is a valuable source of insightful data for business strategists during the decade ...
- Topmost Leading Manufacturer Covered in this report:
- Product Segment Analysis:
Are all toilet tank sizes the same?
Toilet tank sizes vary depending on the type of toilet you have. Toilets come with one of three flushing systems; dual flush, gravity, and pressure-assisted. Generally, toilet tank sizes are universal within these flushing system categories, unless you have a custom toilet.
What is the length of an average toilet tank?
Toilet dimensions overview: Height (top of tank): 29″ to 31″. Width (tank is usually the widest): 14″ to 16″. Height to seat: 16″ to 17″. Depth: 28″ to 32″. Note the above can vary considerably depending on the type of toilet.
How much does a toilet tank weight?
Toilet tanks also vary in weights, just like toilet bowls. A toilet tank weighs 1/3 to 1/2 the bowl's weight, which is about 25-40 pounds. To get an idea of how much a tank would weigh, check below.
How much does a porcelain toilet and tank weigh?
It is dependent on type and design. Standard two-piece toilets weigh between 60 and 100 pounds. One-piece toilets can weigh up to 120 pounds.
How heavy is a toilet cistern?
Typically, the cistern of a 2 piece toilet weighs anywhere between 25 and 45 pounds without water. On average, tanks weigh an additional 10 pounds when they are full of water. The cistern comprises approximately 30% of the overall weight of a 2 piece toilet.
How much does a toilet tank lid weigh?
10 poundsToilet tank lids weigh 10 pounds on average. The ratio of a lid's weight to its size is high.
How do you lift a toilet?
3:354:32How to Remove a Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I just take a hacksaw blade with a pair of leather gloves. And. I just get on the bottom of theMoreSo I just take a hacksaw blade with a pair of leather gloves. And. I just get on the bottom of the nut. And we're just going to work on top of this washer. And on the bottom of that nut.
How much do Kohler toilets weigh?
Enhance your purchaseColorWhiteMaterialChinaBrandKohlerItem Weight93 PoundsShapeElongated
How much does each part of a two piece toilet weigh?
A standard one-piece toilet weighs about 88 pounds (40kg), whereas a two-piece toilet weighs about 55 pounds (25kg).
How heavy is a Toto toilet?
89 PoundsEnhance your purchaseColorCotton WhiteMaterialPorcelainBrandTOTOItem Weight89 PoundsInstallation MethodFloor Mounted
How much does a stainless steel toilet weigh?
Stainless steel toilets are significantly lighter than porcelain toilets and usually never weigh more than 60 pounds.
Why are toilet tank lids so heavy?
It would seem that the actual reason for a heavy tank lid is noise abatement. The more mass, the less noise. ... The same reason that cast iron pipe is preferred to light weight PVC pipe. ...
Can you buy just the top of a toilet tank?
Replacing Broken Toilet Tank Covers Many stores out there do not sell individual lids and make you purchase a whole new set when all you need is simply a new cover. We have hundreds of wholesale replacement toilet tank lids to choose from.
How much does a Kohler one piece toilet weigh?
Enhance your purchaseColorWhiteItem Dimensions LxWxH29.3 x 18.9 x 28.8 inchesMaterialVitreous ChinaBrandKohlerItem Weight103 Pounds
How much does a one piece toilet weigh?
A simple one-piece toilet would weigh around 88 to110 pounds hence heavier than a two-piece toilet.
How much does a toilet tank weigh?
Toilet tanks also vary in weights, just like toilet bowls. A toilet tank weighs 1/3 to 1/2 the bowl’s weight, which is about 25-40 pounds. To get an idea of how much a tank would weigh, check below. Only the tank weight in 2-piece toilets can be measured.
What is the difference between a comfort height and a compact toilet?
Comfort-height toilets are much bigger compared to compact toilets. Compact toilets are for small bathrooms because of their small size. While other brands prefer using smaller tanks on their toilets to enhance their lightness, comfort height toilets have additional materials that make them heavier.
How much does a toilet weigh?
The average one-piece toilet will weigh roughly 100 lbs. Depending on several factors, it can weigh 20 lbs more or less. A two-piece toilet will weigh significantly less because it comes in two pieces. The bowl will be that little bit heavier than the tank and will weigh around 50 – 60 lbs. If you would like to know how a toilet weighs this much, ...
Why is a one piece toilet heavier than a two piece toilet?
The one-piece is obviously heavier because the bowl and tank are firmly intact. The two-piece toilet is easier to lift because the base and tank are separate, making it easier to install .
How heavy is a toilet?
When it comes to weight, one-piece toilets generally weigh around 100 Pounds, while the two-piece is relatively ...
How long do toilets last?
Toilets are durable and should last for a period of around 20 to 30 years, which is a pretty long time for a household fixture. The average person will probably not have to install or lift many toilets in their lifetime, therefore, you may be curious on how much does a toilet weigh.
How to transport a toilet from one area to another?
If you need to transport the toilet from one area to another, then a wheelbarrow or a hand trolley can be useful. Make sure that the toilet is well protected so that you don’t chip the porcelain. When lifting the toilet, make sure lift with proper form to protect your lower back from injury.
Why do toilets weigh the same?
Most people believe that toilets weigh the same due to similarities in designs and use. The truth is that several factors impact the total weight of a toilet. These factors include:
What is a toilet made of?
Material. Almost all toilets are made of porcelain, created using clay. Vitreous china is a very popular material for good quality toilets by the leading brands. This porcelain material is strong and durable and will last for many years.
How much does a toilet weigh?
On average, one-piece toilets weigh anywhere from 60-120 pounds (an average of 88 pounds) depending on the make and brand. The standard two-piece toilet, on the other hand, is slightly lighter. They are about 50-100 pounds, with the average being around 60 pounds.
What is the most common type of toilet?
The most common type of toilet is a gravity-based flushing system. Breaking that down further, the two-piece toilets tend to be the most commonly found in homes. In fact, there is a good chance that the model in your home is a two-piece model. On average, two-piece models in most US homes range between 70 and 100 pounds.
Why is my toilet so heavy?
The simple fact of the matter is that the vast majority of toilets are constructed of porcelain. Porcelain is made up of different clay, primarily Kaolin clay. There is also quartz mixed in to give porcelain that translucent look.
What are the different types of toilets?
What are the Two Types of Toilet and What is the Difference? 1 Single-piece toilet. A single-piece toilet is where the tank and the bowl are fused together. There are no joints to be seen. 2 Two-piece toilet. This is the most common toilet in the US. There is a joint fitting that holds the tank and toilet separately from one another.
What is the skirted look on a toilet?
There is extra porcelain used to fill in those gaps. That is what gives them the skirted look around the bowl. It is also what conceals the inner portions of the toilet and gives it that “S” shape. The skirted look requires more porcelain than two-piece toilets.
Why are bowl and tank fired separately?
The most common explanation is that the bowl and tank are fired separately. That process can help reduce the weight versus a one-piece toilet. More porcelain used. The more realistic explanation is that one-piece toilets make use of more porcelain.
What is single piece toilet?
A single-piece toilet is where the tank and the bowl are fused together. There are no joints to be seen. Two-piece toilet. This is the most common toilet in the US. There is a joint fitting that holds the tank and toilet separately from one another.
How Heavy Is a Toilet?
Your average toilet will weigh anywhere from 60 to 130 pounds. Keep in mind that this is the weight for the average floor-mounted toilet, as wall-mounted toilets tend to be a bit lighter.
Can One Person Lift a Toilet?
It really depends on the person. If you’re confident in your ability to lift a hundred-or-so-pound object, you’ll probably be able to lift your toilet with some effort.
Conclusion
Knowing how much a toilet weighs is important if you plan to replace a broken or outdated one, or if you are remodeling your entire bathroom .
How much does a toilet bowl weigh?
This is the part of the toilet that people will sit on; therefore, it must be solid and sturdy. Most bowls weigh between 22 and 28 kg without the tank. Since the tank is attached to the back, where there is usually less weight for the toilet, it balances this area because it is lightweight.
How heavy is a porcelain toilet?
However, there are toilets made of different materials such as: Porcelain toilets: This is the most conventional material with which most toilets are made and has a weight of approximately 24.5 to 29 kg. Clay toilets: Mud toilets weigh an average of 26-31.5 kg.
What is a one piece toilet?
One piece toilets are rapidly growing in popularity due to the many benefits they provide. They are stylish and can create a nice modern look in your bathroom. This type of toilet is molded in one piece. The tank and the toilet bowl are integrated into a single product.
How much does a suspended toilet weigh?
The advantage of suspended toilets is that only the bowl is visible. Therefore, it is quite light. Most weigh between 22 and 36 kg. The steel frame that is mounted inside the wall can add a few pounds to the final installation. This element makes the wall hung toilet strong enough to support the weight of the users.
What is the lightest material to use in a toilet?
Plastic toilets: This is the lightest material with which a toilet can be made. These have an average weight of 10.5 kg. The toilet may not be the heaviest accessory in a bathroom, but it is important to be extremely careful when transporting it since it is an extremely fragile piece.
What is the lightest toilet?
Stainless steel toilets: These are the lightest toilets and have a weight of 12 to 19 kg. In addition, they are characterized by greater durability. They can usually be found in public places and on industrial sites. Plastic toilets: This is the lightest material with which a toilet can be made.
What is the difference between a single piece and a two piece tank?
The difference is that the single piece requires complete fusion, from which the process requires more materials and structural support. By having the tank separate in a two piece model, there is less weight because each part has a different role.
Why are one piece units so popular?
One-piece units are becoming more and more popular due to the numerous benefits they have. At first, they look elegant and modern, but they are also much easier to clean and maintain even though they weigh more. For example, when it comes to two-piece units, there is typically a bit of space between the tank and the bowl. One-piece units won’t have this gap, and instead have an average weight around 90 pounds, with some weighing 120 pounds or more.
How much does a portable toilet weigh?
These are made of plastic and weigh much less than standard models. An average portable toilet weighs only around 10 to 15 pounds.
What is a toilet made of?
Most toilets are constructed out of a special type of porcelain. This material is a very strong version of ceramic combined with quartz. When molded together and hardened, it creates an even heavier substance. Some models are made of stainless steel, but these don’t last as long as porcelain.
Does a bidet affect the weight of a toilet?
Buying a unit with more features also directly affects its weight. For example, bidet combos are infamous for significantly increasing toilet weight. Also, if your commode comes with heating elements, fans, deodorizers, and other comfort features, the overall weight is affected. Although it’s great to have all these options, it can be a struggle to transport your new toilet to your home.
Do toilets have a universal footprint?
Despite popular belief, toilets don’t have a universal footprint and can come in various sizes. For example, for smaller rooms, one usually uses more compact models. These are a bit slimmer and use a smaller tank size, both factors which directly impacts their weight. Another variation to consider is the difference between elongated and round toilet bowls. Elongated versions are a bit longer than their rounder counterparts and also weigh a bit more.
Is a toilet heavier than a commode?
Basically, a toilet can be much heavier than most people would suspect. There are still many other bathroom items that weigh even more, but you need to be careful when transporting and installing a newly-bought commode. Its shape makes it difficult to navigate between rooms, so reaching the bathroom can be quite a challenge. Planning ahead, saving plenty of time, and having people to help can all make for a smooth installation process.
What is the most important thing to look at when buying a toilet?
While extra features and components are fun and important, the most important thing to look at is toilet dimensions . After all, you don’t want to get a toilet with an elongated seat if your bathroom is narrow.
How high is the top of a toilet tank?
Here, the top of the tank reaches an ample 30.75 inches above the finished floor.
What is the difference between a full flush and a half flush?
At the top of the tank, you’ll notice that there is a button for a “Half Flush” and a button for a “Full Flush”. Half flushes use significantly less water and ideal for removing liquid waste while full flushes are powerful enough for the thorough removal of other waste.
How to measure the width of a toilet?
To measure the width of a toilet, go from the left edge to the right edge of the toilet tank or the toilet seat -whichever is widest. For the depth go from the front of the toilet rim to the back of the toilet and for the height go from the floor to the rim of the toilet seat, then from the seat to the top of the tank.
How long is a 2 piece toilet?
The toilet seat itself spans 18.5 inches long and is just under 14 inches at its widest. In addition to being long, the Back-to-Wall Elongated 2-Piece Toilet also has some notable height advantages. The seat itself is 16.5 inches above the finished floor.
How long is a toilet seat?
But note that this toilet would feel cramped in many smaller half baths. The toilet seat itself spans 18.5 inches long and is just under 14 inches at its widest.
How deep is a standard toilet?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches. It is also important to note that an ada compliant toilet must be of 17 to 19 inches in seat height.
How many gallons of water does a toilet tank use?
Toilet Tank Sizes. In 1992, U.S. Congress passed a law mandating that the standard toilet tank size in the United States should only use six gallons per flush (gpf). Before this, toilets in the United States could use as much as 13 gallons per flush.
Where is the tank on a toilet?
The tank on a toilet is set at the back of the toilet bowl. Holes drilled through the bottom of the toilet tank match holes drilled through the back of the toilet bowl. Toilet bolts, with wide rubber gaskets, run through the toilet and through the toilet bowl where they are held in place by nuts. A rubber gasket at the bottom of the tank fits into a hole at the back of the bowl. An inlet on the underside of the tank connects to the water supply valve or hose.
What happens when a water tank flapper opens?
As the flapper opens, the water inside the tank rushes out and into the bowl. A float, riding on the surface of the water inside of the tank, lowers as the tank is flushed. When the float drops, it opens up a gate inside the fill valve. The fill valve lets water into the tank until the float reaches the set level.
Can you replace a 13 gallon toilet with a 6 gallon?
The toilet bag displaces water in the tank, allowing the toilet to work with less water. It's not a good idea to switch out an older 13 gallon tank with a six gallon one, as a newer tank may not work properly with an older toilet bowl. Advertisement.
