TYPICALLY, THE POOL WATER LEVEL IS ABOUT SIX INCHES BELOW THE TOP OF THE POOL
| POOL HEIGHT | ACTUAL WATER LEVEL |
| 42" Tall | 3 feet deep (36") |
| 48" tall | 3 feet, 6 inches deep (42") |
| 52" tall (most common) | 3 feet, 10 inches deep (46") |
| 54" tall | 4 feet deep (48") |
Do above ground pools need to be filled?
An above ground pool relies on water to keep its structure. It is imperative to keep the water level at least more than half way filled at all times. An empty pool on a hot day or even a pool with little water in it can cause the liner to shrink and need to be replaced. An empty pool is also susceptible to collapse in high winds or bad weather.
How to fill a swimming pool?
Install all the railing and fittings before you start filling. The railing around the top will help keep the liner in place. It’s also much easier to do before there’s heavy water pulling down the liner and getting in the way. Jump In! Finding water for your pool isn’t usually a difficult task.
How often should I Fill my pool with water?
It is imperative to keep the water level at least more than half way filled at all times. An empty pool on a hot day or even a pool with little water in it can cause the liner to shrink and need to be replaced. An empty pool is also susceptible to collapse in high winds or bad weather.
Should I Fill my pool with city water?
And in areas where city water is your only choice for filling your pool, I highly suggest that you don’t fill your pool without first finding out the cost. If you can swing the cost, city water is the best choice for your pool because it’s already balanced and safe for consumption.
How high should an above ground pool be filled?
Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer. The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned.
Can you overfill an above ground pool?
You don't need to drain your pool, as there is no risk to your pool by it being full. The only thing you lose with a pool filled to the rim is your skimmer's surface cleaning action. Overall, it still draws water and the equipment is just fine.
When should I fill my above ground pool?
You should only have to fill a new above ground pool once. After that you will only need to replace water lost because of evaporation, splashing, routine backwashing or re-opening in summer after winterizing your pool.
What happens when a pool gets too full?
If you get more than five inches of rain in an hour, or if your pool wasn't properly designed with sufficient overflows, then your pool may overflow, which can put you at risk of water getting inside of your home and causing serious damage. As your pool fills with water, it may overflow into your yard.
What happens if I over fill my pool?
Effects on Pool Chemistry If the pool overflows, now only will the pool chemicals be diluted, but they may contaminate the pool deck and surrounding landscape. Removing excess water quickly is important to prevent this.
How full should my Intex pool be?
If the pool is filled properly, the water line should be about two inches above the upper hose connection to ensure water enters the filtration system.
Can you swim in a pool right after you fill it?
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
What happens if pool water level is too high?
If the water level is too high the debris floating next to the opening may pass by without being pulled into the skimmer. However if the water level is too low it may cause the skimmer to suck air into the system. If this happens you may run the risk of burning up your pool pumps motor.
What is the best water to fill a pool?
City Water. This is usually the best and most convenient water to use to fill your pool. It just involves hooking up your water hose and placing the other end directly into your pool. However, it’s not always the cheapest choice. City or municipal water bills can be quite high and the bigger your pool, the higher the cost.
How to figure out how much water a pool holds?
If you decide to go this route, it’s best to figure out how much water your pool holds by checking out your owner’s manual or calling the manufacturer. Then, call your city water department and ask them for an estimate.
What happens if you can't get to your pool?
If they make the trip out and can’t reach your pool, you’ll probably still be charged at least part of the fee. Next, make sure your pool is as clean as you can get it. No sense wasting time fighting off contaminants after it’s full. You’ll have plenty of time to do that the rest of the summer.
Should I fill my pool with city water?
And in areas where city water is your only choice for filling your pool, I highly suggest that you don’t fill your pool without first finding out the cost. If you can swing the cost, city water is the best choice for your pool because it’s already balanced and safe for consumption. Not that you’ll be drinking your whole pool, ...
Is it hard to find water for a pool?
Finding water for your pool isn’t usually a difficult task . The choice you make will just depend on what’s available to you. And if you have multiple options, it might boil down to which one’s the cheapest.
Can you drink your pool?
Not that you’ll be drinking your whole pool, but if it’s safe for consumption, it’s safe for swimming . You still might have to add some chlorine to begin with, but you won’t be fighting all the contaminants you might find in other sources.
Can I use a garden hose to fill a pool?
If you use any method to fill your pool that involves a garden hose, it’s a good idea to use a garden hose filter. These are inexpensive little attachments that simply screw on to the end of your hose and filter out all kinds of contaminants. Trust me, it will save you tons of trouble when you’re trying to balance the water.
What is filling an above ground pool?
Filling your above-ground pool is a crucial step. It’s the first of the many tasks required to make your above-ground pool operational. If you do it right, then the rest of the functions like chemical balancing and maintenance will be a breeze.
How to tell if a pool is above ground?
Check the top of your swimming pool to determine its shape. Most above-ground pools are either circular, rectangular, oval. And since they are an above-ground pool, the depth will be the same unless in a particular case.
How do I clean a new pool?
If it’s a new swimming pool, wipe the white dust with a wet cloth. If it’s a newly built concrete or tiled above-ground pool, remove all the cement and rough edges that might be hanging out. If you bought a house and found the pool without water, check for defects and repair them if reparable.
Can I use a garden hose to fill a pool?
It just involves hooking up your garden hose and placing the other end directly into your swimming pool. However, it’s not always the cheapest choice.
Can I use well water for an above ground pool?
Well water is preferably the most budget-friendly option you can choose to fill your above-ground pool. However, there are 1,2,3s that you need to consider before deciding to hook a filling hose to your well pump. One of the disadvantages of using well water is, the water can get your pool cloudy, smelly, or super dirty.
Is algae bad for a pool?
Algae is nasty, and if you don’t control it this early, you will have a huge problem to deal with later. The pool water is fresh, but that doesn’t guarantee it doesn’t have algae spores.
Why is an above ground pool empty?
An above ground pool relies on water to keep its structure. It is imperative to keep the water level at least more than half way filled at all times. An empty pool on a hot day or even a pool with little water in it can cause the liner to shrink and need to be replaced. An empty pool is also susceptible to collapse in high winds or bad weather.
Can an empty pool collapse?
An empty pool is also susceptible to collapse in high winds or bad weather. Whenever replacing water in your pool, both removal and refilling should be completed in the same day.
Why is my pool overflowing?
In Southern coastal areas, for example, heavy afternoon thunderstorms can cause a pool to overflow. If the water level is too high, debris will float back out into the pool rather than being trapped by the skimmer.
How does water enter a pool skimmer?
Water enters the skimmer and moves to the filter through hoses or pipes, and back out from the filter into the pool through return jets. The skimmer is also a resting place for larger pieces of dirt and debris that are blocked by a skimmer basket. For effective filter action, the water level should be at the midpoint of the skimmer.
Why does my pool water drop?
It is also the more common problem, by far. Simple evaporation and active swimmers splashing water out of the pool can both cause a pool's water level to drop a lot. Vacuuming, backwashing, and leaks in the liner and filter components can also cause a drop in water level. If you notice your pool water level dropping even during periods ...
What is the purpose of a pool skimmer?
The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned. Water enters the skimmer and moves to the filter through hoses or pipes, and back out from the filter into the pool through return jets. The skimmer is also a resting place for larger pieces of dirt and debris that are blocked by a skimmer basket.
Why is a water filter not designed to suck in just air?
The filter is not designed to suck in just air but needs the proper flow of water to work efficiently. Because of the potential problems with the filter system, a water level that is too low is a more severe problem than high water. It is also the more common problem, by far. Simple evaporation and active swimmers splashing water out ...
What happens if the water level is too high?
If the water level is too high, debris will float back out into the pool rather than being trapped by the skimmer. And the flow of water into the main filtration system will be less efficient, because optimal flow occurs when the water surface is exposed in the skimmer.
Can splashing lower pool water level?
Splashing swimmers, as well as evaporation, can lower the water level in swimming pool. Compared to balancing chemicals and maintaining filters and pumps, monitoring the water level in your above-ground or in-ground pool might seem very easy. Its simplicity, though, is precisely why it checking the water level is overlooked by many owners.
How old are kids when they get chemical injuries in pools?
About a third to a half of pool chemical injuries occur in children 17 years of age or younger.". Advertisement. To help with this, you'll want to post aquatic safety signs around the pool, which you can find in your pool's manual or at a local pool store. For pool chemicals, the CDC provides safety posters here.
Do you vacuum the bottom of a pool?
While you were installing and filling the pool, it's likely that debris entered the inside of the pool. "You need to vacuum the bottom of [the pool] to get up any lingering debris that could damage the pool liner," Dan Bailey, president of WikiLawn, a lawn and garden resource, tells Hunker.
Do pool owners need to install window locks?
Advertisement. Hlavsa specifically recommends that pool owners consider installing window locks and alarms, along with fencing around the pool, to make sure that children don't have easy access to this area. The same goes for pool chemicals.
Can you test pool water yourself?
"You can either test the water yourself or you could bring it into a local company to get it tested, but you're going to want to pick up some test strips or a test kit," Matt Giovanisci, founder of Swim University, a pool and spa care resource, tells Hunker. You'll want to ensure that the water is chemically balanced, while carefully following the pool manufacturer's instructions, before allowing anyone to swim.
Is chlorine safe to swim in?
If the pH goes above 7.8, the chlorine won't be as effective at killing germs and swimmers can become uncomfortable. Giovanisci adds that you'll want to allow the chemicals to circulate for a few hours and then test the water again. Once everything is balanced, then it's safe for swimming.