How far should a slide-in range stick out from the wall?
A flush range is only level with your countertops, not your cabinetry. So, your appliance needs to stick out from the wall a few inches at least. That means you should push your slide-in stove back until it’s about six inches from the wall. Then, ask a contractor or read the owner’s manual for more details. How Do You Measure for a Slide-In Range?
How far should a range door stick out from the cabinets?
It depends on the model of range, but a range door SHOULD stick out somewhat from the base cabinets, typically by a couple of inches. The oven minus the door should be flush with the base cabinets, and the oven's door sticks out.
What is a slide-in range?
A slide-in range isn’t like a freestanding range. That’s because slide-ins fit flush with your existing countertops. So, you can add a stylish stove cover and instantly extend your counter space. Then, you can use the extra space for decorations and kitchenware.
Do you have to put countertops behind a slide-in range?
Fortunately, you don’t have to put in countertops behind your slide-in range. Instead, you can use stovetop extenders, covers, or caulk to fill in the gaps. So, select a stove that fits your kitchen, and don’t be afraid to ask for help if you need it.
How far back should a slide in range go?
The recommended gap between a slide-in stove and a sidewall is a minimum of fifteen inches. There should also be a gap of at least one inch between the back of the slide-in unit and the back wall. A landing area of a minimum of twelve inches to fifteen inches is recommended on either side of the cooktop.
How far should range stick out from cabinets?
Another one of the important range dimensions you should factor in is how much space your oven door will need when open. You'll need to allow enough room to open the door fully and remove or insert items. A good rule of thumb is to allow between 42 inches and 48 inches between your range and a cabinet or island.
How should a slide in range fit?
0:282:32Free-Standing VS Slide-In Stove - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo usually a slide-in range is slightly shallower depth wise than a free-standing.MoreSo usually a slide-in range is slightly shallower depth wise than a free-standing.
How much space should be between stove and wall?
There should be two inches of space between the back wall and a drop-in or slide-in (gas or electric) style range. A freestanding range (gas or electric) requires no space between it and the back wall. There should be at least twelve inches between any style range and the closest sidewall.
Should slide-in range be flush with cabinets?
Slide-in ranges are installed so that, with the oven door open, the front side edges of the range are flush with the cabinetry and do not stick out. Once the oven door is closed, the door and handle should only extend between 1 and 2 inches from the cabinetry.
Can a slide-in range go against the wall?
Yes it can be slid all the way against the wall. You may have to alter your counter top if you have the kind with the back piece on the wall. A backsplash isn't needed unless you want it for beauty.
How do you fill the gaps on a slide in range?
2:074:48Cy's Solution to Annoying Stove Gaps - YouTubeYouTubeStart of suggested clipEnd of suggested clipI it's too loose to fit in there properly. So I cut it into shape. And then I was trying to thinkMoreI it's too loose to fit in there properly. So I cut it into shape. And then I was trying to think what I could use and I ended up using duct tape.
Should stove be flush against wall?
First, you need to make sure that your stove is supposed to be flush with the wall. There is a chance that your stove might not need to be flushed. Furthermore, if your stove is sticking out too far, the most likely problem is that there was a gas line that was attached to the stove.
Does a slide in range sit on the floor?
Drop in ranges DO NOT sit on the floor. They rest on a toe-kick high pedestal. Slide in ranges are designed to rest on the floor.
Should there be a gap between stove and counter?
The higher priced ones tend to have a bigger oven and they stretch them to the full 30. Even if they are 29 7/8, 1/8 inch split between both sides is not enough room to move the range without damaging it or the counter. That means a standard opening should be at least 30 1/4 and your's is 30 1/2.
How much space do you need on either side of a stove?
Allow at least 15 to 18 inches of counter space on one side of the oven. Allow counter space on both sides of the stove or stovetop – 12 to 18 inches on one side and 15 to 24 on the other.
Does a slide-in range need a backsplash?
Do I need a backsplash behind a slide-in range? Backsplashes are not mandatory, but they are everywhere in today's modern homes. The controls on a slide-in range are in the front, not on a lip in the back of the range. So, if you install a backsplash, make sure it extends all the way to the base of the countertop.
Should stove be flush against wall?
First, you need to make sure that your stove is supposed to be flush with the wall. There is a chance that your stove might not need to be flushed. Furthermore, if your stove is sticking out too far, the most likely problem is that there was a gas line that was attached to the stove.
Will a 30 inch stove fit in a 30 inch opening?
30 inch stove won't go through 30inch opening.
How high should stove be above countertop?
According to Kitchen Cabinets and Hardware, the height of the stove top is standardized at 36 inches. This is the same height as most countertops, so the cooking surface on your stove top matches the preparation surface on the counters. Since both surfaces are the same, it simplifies cooking and food preparation.
Should countertops have overhang?
A standard countertop usually has an overhang of 1½ inches. Although some countertops may have a longer or shorter overhang, this number is generally the standard length for an overhang in homes. When utilizing an overhang for kitchen islands, the standard amount of overhang is typically 12 inches.
What Is a Slide-In Range?
A slide-in range isn’t like a freestanding range. That’s because slide-ins fit flush with your existing countertops. So, you can add a stylish stove cover and instantly extend your counter space. Then, you can use the extra space for decorations and kitchenware.
How Far Should a Slide-In Range Stick Out From the Counter?
For safety reasons, contractors recommend keeping a small gap between a slide-in range and the counter sidewall. You’ll likely have to make room in the back for components as well. However, always ask your contractor for specifics because each kitchen is different.
How Do You Fill the Gap Between the Stove and the Counter?
There are several ways to fill in the space between your counters and stove. Plus, you don’t always have to pay for custom cabinetry either. Instead, use one of the following options to create a sleek aesthetic in your home:
Do Slide-In Ranges Have Side Panels?
Slide-in ranges don’t usually have finished sides. That’s why people don’t use them as stand-alone appliances. In most cases, flush ranges need cabinetry beside them to hide the internal components. Otherwise, it looks ugly and can even be dangerous.
Does a Slide-In Range Need a Backsplash?
Your slide-in stove may or may not need a backsplash behind it. It all depends on how you design the cabinetry. However, adding a durable covering to your wall can help keep you cleaner and safer while cooking.
Are Slide-In Ranges Worth It?
Since slide-in ranges make your home look more modern, some homeowners would say they’re well worth the money. However, installing one may require a few adjustments to your property. And that’s especially true if your countertops are uneven or if you need to repair/replace the existing backsplash.
Related Questions
No, a slide-in range cannot be a freestanding appliance. That’s because it doesn’t have side panels or a backsplash. Furthermore, slide-in stoves are supposed to sit flush with your countertops for a sleek, modern look.
Should my range be sticking out this much?
I expected the door and handle to stick out, but not the main body. My kitchen designer had the specs of the range. It is pushed all the way to the wall.
Comments (57)
I think you are worrying needlessly. Is this the first commercial type range you have had? I think that may be why you find it unusually big. It is big. Did the floor get reinforcing for the heavier range? Are you having a commercial exhaust fan installed to take care of the added heat?
