How deep into the ground should a T-post be?
Half of the T-post should be underground! Just kidding, it should be in the ground past the dog ears that are about a foot from the bottom. If you want a 6' fence, then you need 7.5' or 8' T-posts. You want at least 1' but 18" is better. You will also need a T-post digger. They slide ontop of the post and you basically hammer them into the ground.
How far apart should t-post fences be?
T-posts should be placed no more than 12 feet apart. Longer spans make it more likely that the posts will have difficulty supporting the weight of the wire. In most instances, 10-12 feet is the optimum distance, giving sturdy fence support without adding unnecessary T-posts. Step 4 - T-Posts Have a Special Driving Tool
How big of a T-post do I Need?
If you want a 6' fence, then you need 7.5' or 8' T-posts. You want at least 1' but 18" is better. You will also need a T-post digger. They slide ontop of the post and you basically hammer them into the ground.
How do you drive a T post into the ground?
Drive each T post 18 to 24 inches into the ground with a T post driver, checking for plumb every 4 inches or so. Wire can be looped around the corner post and fastened in place with wire staples.
How far down do you drive T-posts?
T-posts are available in a variety of heights. When it comes to selecting the proper t-post for your project, choose a post that is 24″-36″ taller than your finished fence. That's because the post will need to be buried at least 2′-2-1/2′ feet deep to prevent weather changes or determined animals from pulling them out.
How far in ground should T-posts be?
2 feetThe depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How do you put T post in the ground?
0:552:07How to Install T Posts - YouTubeYouTubeStart of suggested clipEnd of suggested clipDrive the posts down about 18 to 24 inches. Completely burying the anchor to make sure livestock canMoreDrive the posts down about 18 to 24 inches. Completely burying the anchor to make sure livestock can't easily pull the post out by lifting on the wires.
How far the in the ground do you put at post?
The general rule of thumb when setting a post is that the depth of the post's hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How deep should an 8 foot post be in the ground?
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you'll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How far apart should T-posts be for cattle?
Fence posts need to spaced 50-100 feet apart. Using the right energizer. They suggest 1 joule of output per mile of fence.
How do you drive a 10 foot T post?
1:034:33Installing T posts with a T post driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn about a foot into the ground below where the t-post bracket or you post is attached to the post.MoreIn about a foot into the ground below where the t-post bracket or you post is attached to the post. So just using your upper body strength. You're going to want to raise this and pound it.
How tall of T post do I need?
Firstly, let's establish one simple rule: your t-posts should be about two feet longer than the height of your fence. This is why t-posts are typically sold at lengths between 5 and 10 feet.
How many t post do I need?
An In-Depth Look at Post Spacing Using the above rule of thumb, posts can be spaced anywhere from 8 to 12 feet apart. Generally, a successful structure will have five steel t-posts to one wooden post. Spacing the posts 8 feet apart will require 660 posts. On the other hand, a 12-foot spacing requires 440 posts.
How do you build a fence with T-posts?
How to Install a T-Post FenceDig a Hole for Each Corner Post. ... Set the Corner Posts. ... Create a Guide With String. ... Dig Holes 8 Feet Apart. ... Mix Your Concrete. ... Cut Your Horizontal Braces. ... Install the T-Posts. ... Distribute the Tension Evenly.More items...
Can you drive at post with a hammer?
3:578:19How To Hand Drive A T-Post Into Hard Packed Stone ... Or Just Normal SoilYouTubeStart of suggested clipEnd of suggested clipI used to use a sledge hammer uh to drive t posts. And then a few years ago as i getting up in yearsMoreI used to use a sledge hammer uh to drive t posts. And then a few years ago as i getting up in years i splurged for a uh t-post pounder like this. And these are a very handy.
How far apart should T-posts be for goat fence?
8 to 12 feetPost spacing is another important aspect to consider, for sheep/goat applications we recommend 8 to 12 feet.
Step 1 - Layout The Fence Plan
For best results, identify the corners, and run a string or twine line to define a straight path from corner to corner. This helps you keep the fen...
Step 3 - Space T-Posts Evenly
T-posts should be placed no more than 12 feet apart. Longer spans make it more likely that the posts will have difficulty supporting the weight of...
Step 4 - T-Posts Have A Special Driving Tool
Use the T-post driving tool. It is a special weighted pipe that slides up and down on the top section of a T-post, forcing the post into the ground...
Step 5 - Run Lowest Strands First
Begin at a corner, and attach the first run of wire to the lowest desired point on the T-post. Special wire connectors are available to simplify th...
Step 6 - Cap The Posts
Special rubber T-Post caps are available that protect humans and livestock from the sharp edges of a T-post. These caps are available in bulk, and...
How to keep a fence running straight?
For best results, identify the corners, and run a string or twine line to define a straight path from corner to corner. This helps you keep the fence running straight, and saves a lot of cross checking. Be sure that the fence path is free of debris in undergrowth that could interfere with a wire fence. T-post fence posts are not generally used ...
How far apart should T posts be?
T-posts should be placed no more than 12 feet apart. Longer spans make it more likely that the posts will have difficulty supporting the weight of the wire. In most instances, 10-12 feet is the optimum distance, giving sturdy fence support without adding unnecessary T-posts.
What is a rubber T post cap?
Special rubber T-Post caps are available that protect humans and livestock from the sharp edges of a T-post. These caps are available in bulk, and slip over the end of the post. These caps are not required, but they are strongly advised for safety precautions.
Do you need braces for a stretched fence?
If the wire will not be stretched after it is installed, corner braces may not be required. These braces are meant to handle the pressures of stretched wire and are only required in unstretched fences if the posts are being pulled towards one another by the weight of the wire.
Can you use T posts on a wire fence?
Be sure that the fence path is free of debris in undergrowth that could interfere with a wire fence. T-post fence posts are not generally used for the corners, but corner joints are available at large hardware stores. There are brackets which use T-Posts to form corners, but they may not be available in your area.
