How does Worx command feed work? Worx string trimmer comes with a developed Worx command feed to guide the operators instantly when the trimmed line should be wound. It electrically regulates when to feed the line and stops awkward bump feeding. With the help of the command, you can feed the trimmer line easily only by rolling the pushbutton activator.
What is Worx command feed on a string trimmer?
Worx string trimmer comes with a developed Worx command feed to guide the operators instantly when the trimmed line should be wound. It electrically regulates when to feed the line and stops awkward bump feeding. With the help of the command, you can feed the trimmer line easily only by rolling the pushbutton activator.
What is the WORX GT command feed?
The WORX GT 3.0 features a unique Command Feed button that allows the user to spool out ¼ in. of line at a time whenever it’s needed. Quick-change, snap-in spools that greatly simplify changing the cutting line.
What batteries can I use with my Worx power tools?
While the WORX 40V Power Share™ platform allows you to share batteries between tools within the same voltage family, batteries should only be used with tools of a corresponding voltage. Use your 20V Max Lithium battery with any 20V WORX tool – even the power tools.
How long does it take to charge the WORX Max batteries?
It takes about 60 minutes to fully charge both included batteries with the included dual-port charger. Can I use my 20 Volt Max Lithium batteries on my other WORX tools?
How do I use Command feed on WORX trimmer?
L) Your trimmer is equipped with a Command Feed System. For efficiently feeding the line, just press the command feed button while the machine is running until you hear the 'clattering' noise of the line cutting. The motor will shut off when pressing the Command Feed button and will restart when releasing the button.
What is command feed on trimmer?
The GT 3.0 now features a command feed button to extend the line as you work. No more stopping and starting, bumping or turning it over to extend the line, just press the command feed button and continue to work. The 12-inch cutting diameter means more trimming in less time.
How does the Worx edger work?
0:572:18WORX GT 2 0 How To General Use & Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe like it now you just pull. And give a little twist on the trimmer head and now you have aMoreWe like it now you just pull. And give a little twist on the trimmer head and now you have a powerful precision edger it's great for edging down sidewalks.
How do you set up a WORX trimmer?
0:082:29Worx Grass Trimmer/Strimmer Set Up - WORX UK - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the grass trimmer out of the box. And place it in a comfortable. Position to work on remove theMoreTake the grass trimmer out of the box. And place it in a comfortable. Position to work on remove the guard screw on the underside. Take the safety guard. And slide it along the metal guide.
Why does my line keep breaking on my trimmer?
Usually this is the result of the cutting head being taken too close to objects, e.g. garden stones, paving edges, walls etc. The cutting line must be allowed to rotate freely and the correct diameter and type of line should be used.
How do you use a trimmer edger?
8:1213:06How To Edge Like A Pro With a String Trimmer Vs Using A Stick EdgerYouTubeStart of suggested clipEnd of suggested clipThat's where the skill set comes into play if you can just lock it out with your arms. And basicallyMoreThat's where the skill set comes into play if you can just lock it out with your arms. And basically just keep that line the whole way down that's how you're going to get that smooth edge all the way.
Where are Worx tools made?
Now, remember that Worx is owned by the Positec Tool Corporation, and yes, they make all of their products in China. Although you might be worried about tool quality issues due to the location of manufacturing, most would agree that Worx tools are some of the better ones to come out of China.
What size line does the Worx trimmer use?
approximately 0.065”The diameter of this line is approximately 0.065”. The line is pre-wound on spools specially designed to work on Worx 20V and 32V battery operated trimmers.
Why is my Worx trimmer not working?
Try a replacement battery if they still don't illuminate. If the replacement battery doesn't work, the charging station may need to be replaced. Plug the charged battery into the trimmer. Press in the lock button, on the side of the rear handle, and depress the trigger.
How do you fill a trimmer line?
1:384:51How to Refill Trimmer Line : Lawn Care & Power Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'd pull out about 20 feet of line I'm going to use a shorter piece and cut it to length. ThenMoreSo you'd pull out about 20 feet of line I'm going to use a shorter piece and cut it to length. Then you insert the line through the hole in the spool. And even up both lengths of line.
What size line does the Worx 20V Trimmer use?
approximately 0.065”And its diameter is approximately 0.065”, the same gauge that professional crews use. These spools fit the Worx 20V and 32V trimmers, and even the 40V 3.0 String Trimmer/Edger model, WG180.
Step 1: Pressing the release tabs
First of all, find out the release tabs of the trimmer that hold the spool in position. Keep an eye at the edge of the trimmer shaft where you’ll get the trimmer head. The releasing tabs are placed on the side of the head. After finding it, press the release tabs.
Step 2: Pulling the spool
Drag the spool of the trimmer head in order to discard the remaining strings from the spool.
Step 3: Dividing the strings
In this step, you need a pair of scissors to cut down the double helix Worx strings into two equal pieces. Divide the strings to the length of 25 feet with the help of a scissor.
Step 4: Feeding the strings
Follow the Worx command feed string in this step. At first, you need to feed the tip of the string placed at the end of the spool.
Step 5: Placing the second string
You have to set the second string to the second spool hole. Continue winding the second string as you do for the first string.
Step 6: Sliding the spool back to the shaft
This is the last step of winding your Worx trimmer line. You need to slip the spool back to the trimmer shaft. Set the spool’s cover and don’t forget to feed the strings again by the holes on the cover sides. Fix the cover in the exact position. And lastly, haul the strings tightly to release them from the spool’s sides.
String Trimmer Dos
DO protect your eyes from flying debris with tight-fitting goggles or safety glasses.
Cordless String Trimming: Freedom to Roam
There are three basic types of string trimmers: gasoline-powered, corded electric, and battery-powered cordless. (Propane-powered trimmers are also available, though they’re much more rare.)
What is Worx tool?
WORX was built on a platform of innovation, power and performance. Our tools are engineered with superior technology and utility built into every contemporary design, so you can perform with precision.
What is a safety guard on a Worx string trimmer?
The safety guard is an essential part of the tool. Not only does it keep you safe from any debris from the trimming/edging, it also helps regulate the length of the cutting line. Without the safety guard, your WORX String Trimmer / Edger will not operate properly and you are at risk for injury.
Common solutions for: Worx String trimmer string line won't feed
Try removing the trimmer head and cleaning it thoroughly. If the trimmer head is worn out, replace it.
The Right Parts for the Job
We carry more than 4 million parts from over 175 major brands, so chances are, we've got the part you need.
