How does a traverse curtain rod work?
- Remove the draperies from the traverse curtain rod.
- Pull both the overlap and underlap masters to the outside ends of the rod for center open drapes.
- Pull on one side of the cord that is knotted on the back of the overlap or underlap master, depending on the setup of your curtain rod.
How to hang sheer curtains on a traverse rod?
Mar 01, 2020 · How does a traverse curtain rod work? Remove the draperies from the traverse curtain rod. Pull both the overlap and underlap masters to the outside ends of the rod for …
How to use traverse rods for Rod pocket curtains?
Feb 05, 2022 · What is the traverse rod? A traverse rod is a type of curtain rod that is designed to fit in windows with odd shapes and sizes. This is often necessary for homes built before 1950 …
How to adjust the cord in Traverse curtain rods?
Traverse rods have clips or eyes that move along a track embedded in a slot in the rod.The eyes have a small opening for the curtain pins and they'll run evenly across the rod, with the number …
How to hang ceiling mounted traverse curtain rods?
A traverse curtain rod is basically a rod that hangs like a chandelier, allowing you full access to open and close all the curtains or drapes attached to it simply by pulling on one cord. Typically …
Can you put regular curtains on a traverse rod?
How do you hang traverse curtains?
- Step 1: Look for Heading Tape. ...
- Step 2: Measure the Space. ...
- Step 3: Mark for Pin Placement. ...
- Step 4: Stitch Pin Pockets. ...
- Step 5: Add the Drapery Pins. ...
- Step 6: Hang the Drapes.
How do you string a traverse curtain rod?
How do you hang rod pocket curtains on a traverse rod?
- Mount the traverse rod supports and bracket according to the packaging instructions. Hang the rod in the supports and brackets. ...
- Measure the width of your curtain panels. Cut a piece of pleater tape to this size. ...
- Lay the curtains flat, wrong side up. ...
- Carry one curtain panel at a time to the traverse rod.
Can grommet curtains go on a traverse rod?
Can you use back tab curtains with a traverse rod?
How do you change the draw on a traverse rod?
How do corded curtain tracks work?
How do curtain pulls work?
Can curtain hooks be used on rod pocket curtains?
How do you use curtain tape with Pleater?
How do you attach rod pocket curtain hooks?
Why use traverse rods on curtains?
If you want your curtains and drapery to be functional rather than just for decoration, traverse rods are a great option because they prevent the wear and tear that would normally occur when manually drawing your curtains open and closed.
How to attach a curtain to a traverse rod?
To affix the curtain to the traverse rod, you will need to connect the clips to the curtain pins. Typically, these pins are already attached to the curtain, but if they are not, you can purchase separate pins and then use them to attach the curtain to the traverse rod.
What is the best rod for a room with 8 feet ceiling?
For rooms with ceilings over 8 feet tall, the Kirsch Estate Wood Trends 2” Decorative Traverse Rods Collection works well. The larger rod fills out the space better and also creates a warm and charming look. Similar to the 1 ⅜” Collection, you’ll have 10+ finials and end caps to choose from, along with 9 beautiful finishes ranging from white to black to unfinished to match other wooden furnishings in your home.
What is a Kirsch estate rod?
The Kirsch Estate Wood Trends 1 ⅜” Decorative Traverse Rod Collection combines the beautiful finishes in the Wood Trends Collection with the functionality of the Estate Rod program. 1 ⅜” Traverse rods work well with standard 8 foot ceilings. This specific type of decorative traverse rod brings a warm style and graceful motion to your windows. Choose between 10+ finials and endcaps for this application.
What are traverse rod brackets?
Brackets are a necessary piece for properly installing any curtain rods. As for traverse rods, they use special brackets that are very different from the traditional ones. At Drapery Rods Direct, we offer 3 different types of traverse rod brackets that can be selected before the rod is added to your cart.
What is carrier style drapery?
The term carrier style describes how drapery goes on a curtain rod. There are two main types that will almost always fit on the traverse rods that we have at Drapery Rods Direct. If you’re interested in a transverse rod, make sure you purchase one of these two types of curtains:
What is a single traverse curtain rod?
Single traverse curtains rods can be either decorative or superfine depending on your preferences for a space. Still, this classic take on windows is more customizable with the decorative traverse rod. You can choose from different finishes, add finials, and there is a larger available size range with them. Overall, single traverse rods create a simply elegant look using one layer of drapery that works great for both windows and as sliding glass door curtain rods. Sometimes, one layer of curtains is all a room needs.
What is the traverse rod?
A traverse rod is a type of curtain rod that is designed to fit in windows with odd shapes and sizes. This is often necessary for homes built before 1950 and they are most commonly used in bay windows.
Finding out your window width
You will then measure the width of the window and subtract 1/4 inch from that number. You will use this measurement to find out your window’s width on the traverse rod, which is typically 1/2 inch wide.
Setting up the traverse rod
Now you need to find the center point of the beam. You can do this by measuring from one end to the other and marking that measurement in pencil on the beam, then dividing it in half (or into thirds for an even window).
How to hang curtains on traverse rod
The final step is to hang your curtains on the traverse rod. If you are using a set of standard-sized curtains, you will want to measure out from one side of the window and then use a pencil or chalk line to mark where you would like them to hang. Mark both sides of the window so that your curtains will hang symmetrically.
Measure the length of your curtains
Measure the length of your curtain panels to determine how wide you want the traverse rod to be. Secure one end of the traverse rod at the left or right side of the temporary support beam using a bracket or other anchor system. Make sure it is level and centered.
Attaching your brackets to the rod
Your brackets will be attached to the traverse rod. The first bracket should be screwed into the beam horizontally at about chest height, so it is level with the top of the window frame. The other bracket should be screwed into the beam vertically, so it is level with the bottom of the window frame.
Hang curtains on rod
The curtains will hang on the rod and be held in place by a clip attached to the top of the rod. The clip will be slid over one of the rings on each side of the curtain. You can add a second clip for added security, but it is not necessary when using a traverse rod.
Why isn't a curtain good for traverse rods?
A regular curtain will not work well because it has pockets along the bottom of the panel. These pockets prevent the curtain from sitting flat against the wall and leave gaps where light can sneak through.
What is a traverse rod?
A traverse curtain rod is basically a rod that hangs like a chandelier, allowing you full access to open and close all the curtains or drapes attached to it simply by pulling on one cord.
What is the best way to hang curtains over a window?
Traverse rods are the most common and affordable way to hang curtains over a window and can accommodate small and large windows alike (one piece of track for one panel), making them an excellent choice if you’re looking to save money on your decorating efforts.
How long should a traverse rod drape be?
Note: When using any type of drape on a traverse rod system, keep in mind that the length will probably be longer than your window frame or wall space because one side of the drape needs to fall at least 7 inches onto the floor every time you open and close it. If you’re looking for a more custom look, custom curtains are always an option.
How many curtains can you hang on a traversing bar?
This setup allows you to hang 2 curtains on a traversing bar that run directly above your window treatment but still offer full-width coverage for your windows. Tiebacks are attached to exposed rings which slide overexposed hooks at either end of the traverse rod creating an opening where you tie all panels together in a knot or bow to close off your windows.
What drapes work well with traverse rods?
There are two types of curtains that work well with traverse rods – tab top or pinch pleat drapes.
What is tab top curtain?
Tab top curtains have tabs at each end of each panel which slides over hooks attached to your traverse rod.
How to hang curtains on a traverse rod?
To hang curtains on a traverse rod, you attach drapery hooks to the curtains, and then slip the hooks through holes in the carriers. When you pull the cord, the carriers move along the track. The key to making your own traverse rod curtains is choosing a style that looks and functions right with the carrier system.
How to hide raw edges of curtains?
Use double-folded hems in your traverse rod curtains to hide the raw edges, and then stitch the folds in place by hand. Miter the corners where the side and bottom hems adjoin. Add disk-style drapery weights to the mitered corners, and use chain-style weights in the fold of the bottom hem. The weights cause the curtains to hang straighter, and you won't have to fluff them each time they're opened or closed. Hand hemming also looks better from the front, and it prevents damage to delicate fabrics.
How to protect curtains from the sun?
Lining also protects the curtain fabric from the sun, and it ensures privacy when you're using a lightweight or loosely woven fabric. For even more sun protection and privacy, use an interlining between the curtain fabric and the lining material . In addition to adding more body to the curtains, interlining has thermal qualities. When the curtains are closed, interlining helps keep your home cool in the summer and warm in the winter.
Why do traverse curtain rods open symmetrically?
If your traverse curtain rod is giving you problems, it may be because the system is dirty. Clean the pieces before looking for more serious problems. Advertisement.
How to switch side of curtain rod?
Switch the side of the "draw" (side you pull on the cord) by detaching the pulley cover, and pulling on the cord on the opposite side of the curtain rod, just on the inside of the end brackets.
How to clean a curtain rod?
Dust the top of the curtain rod and the back housing of the rod. This eliminates excess debris that may cause the sliders to function improperly. Spray canned air into the track for large logged debris.
Do curtain rods have pulleys?
Traverse curtain rods use a pulley system so you don't have to open them by hand.
