Pop-up drain emitters work by diverting the water away from the house through a long pipe that runs underground. The pipe has to be angled in a slight slope to ensure there is enough pressure. There is a cap at the end of the drain pipe that is pushed open by the water as it flows out into a more appropriate area for the water to collect or drain.
What is a pop-up drain emitter?
A pop-up drain emitter is part of a system that more efficiently carries water away from a house’s foundation than a standard downspout. By Jennifer Noonan and Bob Vila
What is a drain emitter and how does it work?
This drain emitter ensures the drainage of water to a specific area far from your house’s foundation. On top of that, the emitter works with hydrostatic pressure. That means the flat lid of the emitter will stay closed in dry weather. So, you do not risk running the lawnmower over this.
Can a pop up drain emitter freeze?
Although the pop-up drain emitter is convenient to use, it does have some problems that you should be aware of. In the winter, the water flow from the downspout can freeze, causing the popup emitter to freeze. It happens when it has standing water. During hot winter days, though, freezing risks occur.
Are pop up drain emitters better than Grill grates?
Comparing with pop up drain emitters, grates can discharge relatively more water due to their wider opening. But that can stand up to be an issue due to the discharged water having no direction.
How do you install a pop up drain emitter?
1:125:12How to Install POP UP EMITTER - 3 Ways - 2 kinds of pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the pop-up goes on the top. Make sure that your holes pointing down.MoreSo the pop-up goes on the top. Make sure that your holes pointing down.
Why is there a hole in the bottom of a pop up emitter?
The emitter is installed so that the pop up top is just flush with the ground. During rain-fall, the top is supposed to “pop-up” and disperse the water over the ground. They also have a “weep hole” in the bottom to drain any water when the downspouts are not actively “pushing” water out.Nov 4, 2002
Are pop up emitters good?
The good thing about pop-up emitters is that if there's no steady flow of water, the lid stays shut. That means no debris can make its way into the pipe. It's a great alternative to traditional drain grates that have a tendency to collect rocks, dirt or leaves that'll eventually clog the line.Jun 14, 2017
Do pop up emitters hold water?
Will A Pop-Up Drain Freeze? Although the system is designed to keep water moving away from the house, pop-up drains can freeze if there is standing water in the system. A smaller drain located in the pipe below the emitter normally prevents most standing water in the system, draining the excess water into the ground.Nov 25, 2020
How far should pop up drains be from house?
As mentioned above, the water should be diverted at least 4 to 6 feet away from the house. If a home has basement walls, it should be at least 6 feet away. The furthest away from the foundation the better.Nov 1, 2020
Does a French drain need an exit?
Short answer to the title of "Where should french drain terminate?" is that, ideally, the french drain will terminate to an above-ground exit on the side of a hill or at least a downwards slope, so that the water that was in the drain can escape to get into the place that normal surface runoff goes from the property.May 10, 2019
How deep should I bury my gutter drain pipe?
The trench must be at least 10-inches-deep, but be aware that in cold-weather regions the pipe occasionally will clog with ice during periods of heavy precipitation.
What size gravel is best for French drain?
1/2 inch to 1 inch acrossGravel used for this layer is typically 1/2 inch to 1 inch across -- the larger it is, the better the water flow and less chance of clogs and blockages. For a French drain without a perforated pipe, opt for even larger gravel, such as 1 1/2 inches across.
Where do underground gutter drains go?
Instead of ending up back in your yard, underground downspouts will transport it onto the street, into your garden, or into your local sewer system. Unfortunately, underground downspouts can get clogged, just like your gutters do – and they can be difficult to clean.
When Would You Use a Pop-Up Drain?
Most houses or buildings use a standard downspout mechanism when the rain water is collected by the gutters and deposited close by. In many cases, this works out fine because the area where the water is deposited has a solid or firm foundation.
How Do Pop-Up Drains Work?
Pop-up drain emitters work by diverting the water away from the house through a long pipe that runs underground. The pipe has to be angled in a slight slope to ensure there is enough pressure. There is a cap at the end of the drain pipe that is pushed open by the water as it flows out into a more appropriate area for the water to collect or drain.
How Far Should Pop-Up Drains Be From the House?
When you install a pop-up drain emitter, you need to make sure to dig deep enough into the ground. You also need to make sure that you place the pipe on a slight slope. To be effective, you’ll want to make sure that the water is carried several feet away from your house’s foundation.
What Is the Alternative to Pop-Up Drains?
There are a few alternatives to using pop-up drains. You may look for a more modern design like a mitered drain, or maybe you want a more natural approach to protect your garden and the foundation of your house from water damage? Here are some alternatives you can consider.
In Conclusion
As you may know, the pooling of water in any area is not a good thing. Especially when it’s around the foundation of your house. This can cause lots of issues indoors and outdoors. And it can also erode and damage to your garden.
How Well Do Pop Up Emitters Work?
There’s no question that the number one discharge product in the drainage world is the pop-up emitter. But there’s also no denying that the number one problem with the pop-up emitter is that the grass grows over it and then you can’t discharge your water. Well that’s no longer the case. We’ve come up with a turf restrictor plate.
Pop Up Drains Hold the Least Water
Through all of our years of building roof runoff systems, we have found that the small pop-up emitter holds the least amount of water. This is hugely beneficial when it comes to a clay yard where, when the storm is over, you don’t have that much water being held in a pop-up emitter.
What is a pop up drain emitter?
A pop-up emitter is a clean-looking alternative to normal drain grates. If you’re looking to discretely divert water without worrying about debris or critters clogging a line, consider adding lawn pop-up emitters to your home drainage system.
Where to put a pop up emitter?
You can place a pop-up emitter at the edge of your property or by a curb as long as it’s up to code. You’ll need to terminate the line in your yard in a way that doesn’t affect your neighbors’ properties. Check with your municipality for further details.
What happens to a gutter when it rains?
During a storm, water flows through the gutter system into a drain pipe. Hydrostatic pressure causes the lid to open and disperse the water away from your foundation. Once the flow dies down, the lid shuts until the next heavy rainfall.
Fixing the Pop-up Emitter Problems
Pop-up emitter freezing in winter can be avoided if you take care of a few things while installing the entire drainage system altogether.
How to Repair a Pop-up Drain Emitter?
Sometimes the pop-up drain emitter may end up getting damaged or need repairing. Depending on the damage, you can just dig up the emitter and repair the damages.
