How does a KTAG work? Just install a K-TAG in your vehicle, so you can travel without stopping for a ticket or to pay tolls. Your trips will be read electronically and your tolls charged to your K-TAG account. You'll also save up to 25% on every trip*. Plus, your K-TAG works on toll roads in Oklahoma and Texas making regional travel easier.
Full Answer
What is a K-Tag?
K-TAG is a small device that is electronically read at toll plazas. The primary K-TAG in use on the Kansas Turnpike is a sticker tag, although other options are available. The sticker tag adheres to the inside of your vehicle's windshield.
Can a K-TAG system miss an active tag?
While our system rarely misses reading an active and compatible tag, no system is perfect. There are also many factors that affect whether a K-TAG reads as intended or not. Multiple toll transponders in a vehicle can interfere, causing our system to pick up non-compatible transponders instead of a good K-TAG.
How do I use K-Tag on toll roads?
With an up-to-date K-TAG account you can keep moving on toll roads in Kansas, Oklahoma and Texas. Make your trip seamless and avoid toll violations by: Adding your vehicle license plate to your K-TAG account. This will help prevent being charged the toll violation rate if your K-TAG doesn't read.
What does the KTA do?
Although a separate entity, the KTA works closely with the Kansas Department of Transportation to provide a strong roadway system throughout the state. The KTA was created in 1953 as a quasi-public organization.
How do I use K-TAG?
0:151:03How To: Properly Mount Your K-TAG - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the sticky side of the tag on the inside of the windshield centered a couple of inches belowMorePlace the sticky side of the tag on the inside of the windshield centered a couple of inches below the rear-view mirror carefully press firmly around the edges of the tag secure it to the windshield.
How does K-TAG work in Kansas?
Using K-TAG is easy: you simply adhere the tag properly to your vehicle and link your account to a valid credit card or to your bank account. Statements for the months you have driven are emailed to you. Plus, you'll receive an electronic discount on every trip!
What happens if you drive through a toll without paying in Kansas?
If you didn't exit right to pay, your “missed toll” is considered a violation per Kansas statute and the vehicle's registered owner will be mailed a toll statement at the violation rate.
Do I have to activate my KTag?
You are required to install and use your K-TAG transponder in accordance with instructions received from KTA. Failure to install your K-TAG in accordance with instructions could result in higher tolls or video violations. You agree to maintain a single transponder in your vehicle.
How do you remove a K-TAG sticker?
If you need to remove the K-TAG from your windshield, peel of the tag starting at one corner, then clean any adhesive residue remaining on the windshield using isopropyl alcohol. Discard the used K-TAG. Note: Once you remove the tag, you cannot reuse it.
Does Kansas K-TAG work in Oklahoma?
Regional travel is easier! K-TAG works on toll roads in Oklahoma and Texas. Easily manage your account and review your tolls through an online account portal and mobile app.
Do Kansas tolls take debit cards?
Kansas toll roads accept a credit or debit card for payment. This means payments may be made by bank card on those particular roads. Typically, a major banking network, such as Visa or Master Card is required when using a debit card.
Can I use e zpass in Kansas?
Yes. As long as your account is in good financial standing and your EZ TAG is properly mounted on your vehicle, your EZ TAG will work on toll roads in Kansas.May 6, 2020
How do I pay a missed toll in Kansas?
Payment for missed tolls cannot be accepted until the trip is processed in our system and assigned a statement ID. Trips are processed within three business days and statements are typically mailed to the vehicle's registered owner within two weeks of the trip.
How does plate pay work in Oklahoma?
The PlatePay system takes a picture of the vehicle's license plate and sends an invoice to the registered vehicle owner. The cost, on average, is 75 percent higher than the current cash amount.Jun 23, 2021
What is K-TAG ECU?
K-TAG is the most complete and professional tool to read, write and clone an ECU or TCU on any vehicle. K-TAG communicates with all ECUs, even the latest generation ones. You can read and write directly to the ECU microprocessor, the flash memory and the EEPROM, without opening the ECU!
What does adding a license plate to a K tag do?
Adding your license plate to your K-TAG account simply serves as a backup in the instance your tag does not read and helps prevent toll violations statements. Answers to common questions include:
Can multiple toll transponders interfere with K-TAG?
Multiple toll transponders in a vehicle can interfere, causing our system to pick up non-compatible transponders instead of a good K-TAG. Sometimes the transponder itself is not mounted properly on the windshield whereby reducing the signal strength.
What is a K-tag?
K-TAG is the most complete and professional tool to read, write and clone an ECU or TCU on any vehicle. K-TAG communicates with all ECUs, even the latest generation ones. You can read and write directly to the ECU microprocessor, the flash memory and the EEPROM, without opening the ECU! Recalibrate, Repair, Clone. Do more with K-TAG!
Can you program an ECU with K-TAG?
Thanks to K-TAG you can program the ECU with the files sent directly to you from your Master within a few minutes. You can select your Master from the professional’s network, certified by the Alientech Academy. Engine remapping with zero risk and positive results.
What is a K tag in Kansas?
The toll pass issued by the state of Kansas is K-Tag. Drivers using the K-Tag can drive in K-Tag toll lanes and use all-electronic toll roads. Additionally, drivers with a toll pass compatible with the K-Tag can use their pass on toll roads in the state of Kansas. For help installing a toll pass, see our Install Toll Pass section ...
What is a Texas tag?
TxTag is the statewide pass used across the state of Texas. There are two other major regional systems in Texas: the TollPass from the Dallas-Fort Worth area and the TollTag from the Houston area. Both systems are compatible across the state of Texas.
When counting axles, remember to count ALL axles with wheels touching the ground, including axles on any trailers
▷ When counting axles, remember to count ALL axles with wheels touching the ground, including axles on any trailers you may be towing. This is the calculus tolling agencies will use to determine the number of axles on your vehicle.
Does an electronic transponder reduce tolls?
In most jurisdictions, the use of an electronic transponder will result in lower toll costs , as many agencies discount the toll rates for toll pass users. The discounts can be substantial for regular haulers and commuters, who may need to use a specific road or group of roads on a consistent basis.
Is K tag accepted in Texas?
TEXAS. While there are states where the K-Tag is accepted in some areas, unless the K-Tag is accepted statewide, it will not be listed above. To make certain your toll pass is compatible with other states' tolling systems, see the reference sections below for additional detail and maps. advertisement.
Can you use a K tag in Kansas?
The K-Tag and compatible passes can be used on the following roads in the state of Kansas: Some states may issue discounts for using a toll pass, but not all. In states or on roads where there is a discount, the discount may be limited to those with an account with that state's toll pass system, i.e.: state of Kansas.
When was the KTA created?
The KTA was created in 1953 as a quasi-public organization. On July 1, 2013, legislation formalized the partnership between KTA and KDOT, which means both organizations are directed by the Secretary of Transportation.
Why is my K-Tag not reading?
The two most common reasons K-TAG customers receive violations are: the K-TAG did not read due to a mounting issue and there was no matching license plate listed on the K-TAG account ; the K-TAG account is not in good standing at the time of the trip (i.e., expired credit card, delinquent balance.)
Is the Kansas Turnpike taxed?
No tax dollars have been used on the Kansas Turnpike. Instead, tolls are used to pay for the 236-mile roadway, which allows traditional funding to better serve Kansas' non-tolled transportation system.
Can you miss a toll booth in Kansas?
Whether intentional or not, missing the cash booth on the Kansas Turnpike is different than many other states, due to our entry and exit setup. If a driver exits using an electronic lane without a valid compatible transponder, the “missed toll” is considered a violation, per Kansas statute, and will be tolled at the violation rate based upon the vehicle’s class. Payment for missed tolls cannot be accepted until the trip is processed in our system and assigned a statement ID. Trips are processed within three business days and statements are typically mailed to the vehicle’s registered owner within two weeks of the trip. At that time, the violation fare can be paid here using information from your toll statement.
