Winding the Bobbin 1. Place a spool of thread over the spool pin, which is a vertical spoke located at the back-right of the top of the sewing machine. 2. Take the end of the thread from the spool and carry it left along the top of the machine and around the bobbin winding tension disc, which resembles a small button.
How do you wind a bobbin on a Brother VX 1120?
0:030:50How To Wind A Bobbin on a Brother Sewing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen place the bobbin on the bobbin winder push the bobbin to the post left to right then holdMoreThen place the bobbin on the bobbin winder push the bobbin to the post left to right then hold threads straight up press the foot control or the start button if your machine has that.
How do you thread a bobbin on a Brother VX 1100?
2:063:17How To Thread Brother Sewing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to need to pull your thread or your bobbin through the machine so you'll use that's notMoreYou're going to need to pull your thread or your bobbin through the machine so you'll use that's not a knob here in order to move your needle. And you'll move it down.
Why won't my bobbin wind on my Brother sewing machine?
NOTE: If the correct size bobbin is not used at this time; when the bobbin winder is engaged; the bobbin winder will make a usual noise and not wind the bobbin correctly. 6. Place the spool of thread for the bobbin onto the bobbin thread spool pin. 7.
How do you put the bobbin in a Brother sewing machine?
0:030:41How To Insert A Bobbin on a Brother Sewing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is how you insert a bobbin and bring up the thread remove the plastic cover take your bobbinMoreThis is how you insert a bobbin and bring up the thread remove the plastic cover take your bobbin with the thread wrapped around this way slide it into place and then wrap your thread.
How do you thread the bottom bobbin on a brother?
0:317:37How To Fill & Load Bobbin For BROTHER JX2517 - YouTubeYouTubeStart of suggested clipEnd of suggested clipCase first pull out the spool pin and put a spool of thread onto the pin the spool pin is located.MoreCase first pull out the spool pin and put a spool of thread onto the pin the spool pin is located. Here. Pull it up and place the thread onto the spool pin.
Why is My Brother sewing machine not picking up bobbin thread?
- Make sure the bobbin is wound evenly and has been inserted into your machine properly. - Check for scratches on the bobbin case. - Make sure that the bobbin thread is pulled completely under the pretension, to assure that the bobbin is wound evenly. - Make sure you are using the correct bobbin in the machine.
Why is my bobbin not turning?
0:093:11How to Troubleshoot Bobbin Problems | Sewing MachineYouTubeStart of suggested clipEnd of suggested clipAnd you don't know what's going on so I always recommend taking out the bobbin and the bobbin casingMoreAnd you don't know what's going on so I always recommend taking out the bobbin and the bobbin casing and the first thing you should always do is just rethread it and start over.
Why is my bobbin winder not moving?
Check if you aligned the groove in the bobbin with the spring on the bobbin winder shaft and pressed down on the bobbin until it snapped into place. Check if the thread is passed through the bobbin winding guide correctly. Check if there are scratches or other defects on the bobbin. Replace the bobbin if in doubt.
How do you wind a bobbin thread?
0:171:37Sewing 101 | How to Wind a Bobbin - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you want to go ahead and take that bobbin. And place it on to your bobbin winder. WhileMoreAnd then you want to go ahead and take that bobbin. And place it on to your bobbin winder. While holding the string go ahead and push it over in order to disengage your needle.
How do you load a bobbin?
0:384:47How To: Insert (Load) a Bobbin (Sewing for Beginners) - YouTubeYouTubeStart of suggested clipEnd of suggested clipDirection towards the right hold the bobbin case in your left hand take the bobbin and position itMoreDirection towards the right hold the bobbin case in your left hand take the bobbin and position it into the bobbin case with the thread still going in the clockwise.