How do you use Valspar primer?
- Usage. For interior or exterior use. Apply to drywall, plaster, new or old masonry, bare wood, wood paneling, galvanized metal and aluminum, tile and ...
- Application. Stir thoroughly. ….
- Dry Time. To The Touch: 30 minute – 1 hour. ….
- Clean-up & Disposal.
Full Answer
What is Valspar bonding primer?
Valspar Bonding Primer is a one-step primer and sealer coat for difficult surfaces, both porous and glossy. This primer is exceedingly thick, making it difficult to handle, so use sparingly.
What size roller do you use for Valspar stain blocking primer?
Valspar Stainblocking Bonding Primer can be used with an airless sprayer at 2,000 PSI with a standard 0.015–inch to 0.021-inch size tip. Use only a high-quality, sturdy roller and a medium-nap (3/8-inch to 1/2-inch) roller cover.
How do you use bonding primer sealer on paint?
Use a paint comb to comb out the water from brushes, shake dry, then hang for further drying. Because bonding primer-sealer dries especially thick and hard, it will gum up the paint can near the lid. So be especially sure to clean up the can's grooved top before tightly replacing the lid by hammering lightly.
Can you use Valspar fast Prep on concrete?
Clean, degrease and etch new or bare concrete with Valspar® Fast Prep®. Previously painted surfaces: Clean with an all-purpose cleaner (TSP or substitute), and remove gloss from shiny surfaces by sanding or using a chemical deglosser.
Do you need to sand Valspar bonding primer?
Since this product can stick to glossy surfaces, it is not absolutely necessary to sand them. However, if you are able, sanding will always help a bonding coat adhere better. Cover nail holes with wood putty and caulk all cracks and joints.Oct 25, 2021
How do you use Valspar concrete bonding primer?
Mix well before and during use. Apply only when surface and air temperature are 50–90 °F (10–32 °C). Use a premium-quality, polyester brush for small area (stairs, etc.). For large areas, pour coating in a long, continuous bead across the “shorter side” of the surface.
How do you apply bonding primer?
0:001:05Bonding Primer - Painting Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd starts to blend the uneven surfaces. Now I'm going to come back and put a thicker second coat onMoreAnd starts to blend the uneven surfaces. Now I'm going to come back and put a thicker second coat on once that's dry I'll clock the corners. And put our top coat of paint on.
Do you have to paint over bonding primer?
“Although the topcoat may be applied anytime after the bonding primer coat is applied, we recommend you topcoat within a week after priming for best adhesion results,” says Brendan Steidle, brand manager for Primers and Specialty Coatings at Rust-Oleum.
What does concrete bonding primer do?
This concrete bonding primer is a must if you plan to paint concrete. It lays the foundation for the paint to stick and to prevent peeling and flaking. The primer goes on easily and is white so you make sure to get total coverage of area to be painted. It dries tacky and is ready for a topcoat in an hour!
How long does it take Valspar bonding primer to dry?
4 hoursClean the surface thoroughly and allow to dry before applying primer. Allow to dry for 4 hours after priming and apply your paint in a test area to validate blocking prior to painting your whole area.
How many coats of bonding primer should I use on cabinets?
Only one coat of primer should do the trick, unless your cabinets are really dark, then I would recommend following up with one more coat of primer when that first coat is dry before moving on.Jun 23, 2014
What is the difference between primer and bonding agent?
Primer — hydrophilic monomer used to wet and penetrate the tooth surface. Self-cured bonding agent — bonding agent with catalyst that allows self curing without light activation.Dec 9, 2009
Should I sand between coats of primer?
Re: sanding between primer coat You don't sand between coats to get it smooth, you sand to make it rough. The scratches of the sanding make sure the next layer sticks better. Always sand between coats, with a grit around 180-240, I prefer this by hand but on larger surfaces a machine can be used, gently.Dec 27, 2017
How long does it take bonding primer to dry?
Dries to the touch in 30 minutes and dries to handle in 1 hour. Apply a second coat or topcoat at anytime.
Can I use bonding primer on cabinets?
INSL-X STIX Waterborne Bonding Primer INSL-X STIX Waterborne Bonding Primer is a great option for laminate cabinets. This primer is designed to bond to hard-to-coat surfaces to ensure application is easy and that you get a beautiful finish. It works on a variety of other surfaces and dries in 30 minutes.May 20, 2021
Can you mix bonding primer with paint?
Yes, you can if both a primer and paint are made of the same base. Latex paints for instance won't mix with Kilz, which is an oil-based primer.Nov 20, 2021
Best I have found!
I restore furniture and found this primer to be superior to any I have used in the past. Never have had a bleed through with this on mahogany. Easy to use. Sometimes hard to find at a store.
Great product!!
I have been using this product for years now and it works great! If you have a project that has to be done in 24 hrs I wouldn’t suggest this primer because you have to apply it and let it set for 5-7 days. The longer it sets the better the results.
Poor adhesion to surfaces
Was recommended this by Valspar Rep at Lowe's for an oak trim primer. I sanded and cleaned the oak trim and after allowing this to dry it very easily came off with any light scratch such as fingernail. This Valspar product is extremely thick almost like white glue, very difficult to have it lay flat with brushing on.
Scratched off easily!
I bought this to paint a beautiful detailed and expensive armoire for a client, I thoroughly cleaned the piece and lightly sanded it. I applied 1 thin coat and let dry...it's been 4 days .. the primer is scratching off easily with fingernail test. My client is not happy and I may possibly be out of hundreds of dollars.
What is the best bonding primer?
Projects When Bonding Primer is a Must: 1 Non-porous “shiny” surfaces like tile, metal, mirror and glass. 2 When stain blocking activated by water is a concern: tannin and wood stain bleed. 3 For slick surface adhesion to oil and water based topcoats: polyurethane, varnish, and shellac 4 Plastic, PVC and Resin 5 Sealing knotty wood surfaces 6 Laminated or Thermofoil surfaces
How to test primer adhesion?
Primer isn’t meant to cover, but coat so you will see the surface below it. Apply with a nylon/polyester brush, foam roller, or 3/8 inch nap roller. To test for primer adhesion before painting, don’t scratch but instead apply a small piece of painter’s tape to see if it pulls off the primer.
What is primer used for?
A general primer’s job is to prep the surface for the topcoat. That’s it. An all-purpose primer is great for drywall or going over the same type and color of paint on a variety of jobs.
Do you need to thin VBP before spraying?
I get asked that a lot. When spraying, VBP doesn’t need to be thinned nor is it recommended but you may want to strain it. Once fully dry, you can lightly sand off any imperfections, but it’s not necessary to sand. Always PREP your surfaces by cleaning and sanding flaking or failing paint prior to priming.
When to use all purpose primer?
When you should use an all-purpose primer: To cover and block stains on drywall: crayon, water, grease, pen. During extreme color changes: light to darker or the reverse. Changing from an oil to a latex water-based paint. Moving from a high-gloss sheen to a lower sheen. Prepping bare wood or metal for paint.
Is bonding primer good for painting?
It is the BEST primer and a must when painting over many surfaces. Bonding primer was something that I never knew about, until worked for Valspar and did so for 5 years. When I was asking about painting over a stained wood piece of furniture, my co-worker who managed the primer categories said bonding primer was a must.
Why use bonding primer?
One of the major advantages of using a bonding primer is they save time and money, and if you can get the job done quicker, that’s a benefit. Especially for pros taking on a big job, who may not have the time to take down the gloss or sand the substrate. When it comes to best practices, though, bonding primer doesn’t take the place ...
What is a highly engineered primer?
Highly engineered, it’s a coating that promotes adhesion to the surface or existing coating as well as the new coat that you want to apply. You’re going to pay more, nearly double in many cases, but that’s because they’re designed to do two things very well: stick, and be stuck to. “Most primers have adhesion characteristics,” says Frank Glowacki, ...
Can bonding primer be used over drywall?
Conversely, just because a bonding primer is highly engineered, it doesn’t mean it’s the right coating for every job. Using it over drywall, as an extreme example, would just be a waste of money. If you need a specific hide, odor blocking, or stain blocking, choose a primer with those characteristics.
Can you use primer as bonding primer?
When considering bonding primers, you need to be aware of two common misconceptions: 1. Many products with ‘primer’ in the name aren’t purpose-built or suitable for use as bonding primers. Really, they’re sealers— designed to seal a porous surface and make it even for paint—so don’t try to force them beyond their specs.
Is primer the same as topcoat?
by Jake Poinier. The common link between all the various types of primer is that it is their job to prepare a surface and make it suitable for a topcoat. Not all primers, however, are created equal.
Can you prime over chipping paint?
In most cases, that also means you don’t want to prime over chipping paint—although there are high-build bonding-primer products on the market designed to handle that situation. If paint is popping off, such products lock down the peeling paint and smooth the surface so you don’t see the previous peel barriers.
Does peanut butter bond to topcoat?
If it dries like peanut brittle, the top slice of bread, a.k.a. topcoat, won’t have the best adhesion or durability.”.
