Directions for Scotts EdgeGuard Mini Fertilizer Spreader
- Filling the Spreader. The spreader has an open hopper, making it simple to fill. ...
- Application Rate Settings. A dial on the back of the spreader lets you set the proper application rate, which is normally located on the back of the fertilizer bag.
- Edge Protection Setting. The edge guard sets this spreader apart from many others. ...
- Pass Row Spacing. ...
How do you use Scotts edgeguard spreader?
How to use. Turn rate control to correct setting listed on the back of each Scotts product. Spreader width is 5 feet so allow a few feet in between passes to ensure even distribution. When Edgeguard® is engaged it will block off right side of spreader pattern to prevent product from spreading onto non-lawns areas.
How many sq ft can a Scotts mini spreader cover?
You can even control the panel’s precision rate setting to deliver more accurate coverage on up to 5,000 sq. ft. The Scotts® Turf Builder® EdgeGuard® Mini Spreader comes calibrated and ready to use, so you can get started right away.
How far apart should I spread my edgeguard spreader?
The EdgeGuard spreader releases granules up to 3 feet on either side of the device, so when you turn, leave space between your pass rows to ensure even coverage and to keep from spreading too much fertilizer in one area. Scotts suggests spacing your parallel paths several feet apart, as the total span of the spreader's reach is around 5 feet.
Can you use a drop spreader to cover a mini garden?
A mini garden or a yard that isn’t too big can be easily covered with a drop spreader. Drop spreaders are easy to use as there aren’t any complicated controls involved. The machine does one job, and it does it right.
What setting should I set the EdgeGuard Mini for fertilizer?
The Edgeguard Mini can hold up to 5,000 square feet of lawn products, like fertilizer and seed. With dial settings from 2 to 15, this broadcast spreader can handle a wide range of different sized products. When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13.
What setting do I put my Scotts spreader on?
When using a Scotts rotary spreader, a setting of 6 1/4 is recommended for overseeding. Use the same setting for new lawns or on bare spot repairs; however, Scotts recommends going over the area twice. With a Scotts drop spreader, use a setting of 9 1/2 when overseeding and 15 for new lawns or to patch bare spots.
How do you use Turf Builder EdgeGuard mini?
Using the Scotts® Turf Builder® EdgeGuard® Mini Broadcast Spreader is simple. To begin, turn rate control dial to the correct setting listed on the back of each Scotts® product, pour the product in the hopper, then start spreading.
Is Scotts EdgeGuard a rotary or drop spreader?
Drop Spreader Up to 4,000 sq. ft. Up to 5,000 sq. ft.
What do the numbers mean on a Scotts Edgeguard spreader?
For fertilizer spreaders the numbers usually represent the amount of fertilizer that is to be applied over a specific square feet of land. On spreaders you can find numbers such as 5, 5 and a half or 18 and a half.Feb 3, 2021
How do you calibrate Scotts Edgeguard spreader?
3:074:12How To Calibrate A Broadcast Spreader - YouTubeYouTubeStart of suggested clipEnd of suggested clipBe sure to give yourself enough space to get up to speed before you reach the starting line. OnceMoreBe sure to give yourself enough space to get up to speed before you reach the starting line. Once you hit that line open up the hopper. And continue at a consistent pace.
How do you use Scotts Turf Builder EdgeGuard?
0:051:32How to Use a Scotts® Broadcast Spreader on Your Lawn - YouTubeYouTubeStart of suggested clipEnd of suggested clipAt a steady pace apply a header strip counterclockwise. Around the outside edge of your lawn. ThenMoreAt a steady pace apply a header strip counterclockwise. Around the outside edge of your lawn. Then turn off the edge guard. And apply going back and forth inside the header strip in the longest.
What is EdgeGuard?
EdgeGuard blocks off the right side of the spreader pattern to prevent product from spreading onto non-lawns areas.
What setting should I use on Scotts spreader for lime?
Pelletized lime should be applied every other year (approximately 15 lbs./1,000 ft²) once you have your soil pH to its optimum level, which is between 6.0 and 6.5....Lime.SpreaderSettingScotts (Drop)11.5Scotts (Broadcast)JEarthway EV-N-SPRED21Greenview3 or 45 more rows
Is a drop or rotary spreader better?
Drop spreaders are particularly valuable when you must be precise in the product's release, whereas a broadcast spreader's main function is to efficiently broadcast in all directions. Drop spreaders will also make sure you don't waste any product as you're spreading.
What's the difference between a drop spreader and a rotary spreader?
Purchase a rotary spreader if you are looking for the easiest, lightest pushing workout. Drop spreaders are heavier and require more energy and effort to propel than rotary units.Jul 17, 2017
How many square feet can a broadcast spreader cover?
The hopper can hold enough product to cover 20,000 square feet. Broadcast spreaders make lawn care tasks as fast as greased lightning—you may even feel compelled to do a little dance when you’re done (it’s okay to keep that to yourself).
What is broadcast spreader?
Broadcast spreaders are a secret to keeping your grass nice and thick—and a spiffy shade of green. They’re a triple threat, like the John Travolta of lawn tools: You can use it to seed, feed, and even weed your yard, plus pull it out in winter to apply Scotts® Eco-Blend Snow & Ice Melt on your hardscapes.
How to use
Fill hopper with Scotts® lawn fertilizer or grass seed. Turn orange rate dial to the desired "Broadcast/Rotary Spreader" setting listed on the back of each Scotts® product. To apply product begin walking, then squeeze and hold trigger.
Guarantee
Scotts No Quibble Guarantee: If for any reason you, the consumer, are not satisfied after using this product, you are entitled to get your money back. Simply send us evidence of purchase and we will mail you a refund cheque promptly. For our mailing address or to contact our Consumer Help Center click here.
What is a Scotts spreader?
Before talking about the settings of a Scotts spreader, let’s have some ideas on some basics about spreaders in general; A spreader is a simple tool that has one main job: to evenly spread seeds and fertilizers on the ground. It can spread anything you want to apply in soil with consistency.
What does the number mean on a Scotts spreader?
What the numbers mean on a scotts spreader depends on one major thing; the type of spreader. If you’ve got a regular broadcast spreader, the number means Scotts spreader settings lbs per 1000 square feet area.
How to control lime in Scotts broadcast spreader?
Scotts Broadcast Spreader Settings for Lime. One easy way to control lime application is by covering a spreader hole until only the 1/3rd part of it is open . Lime adds minerals to the soil and, if applied unbalanced, can wreak havoc on plant growth.
How does a drop spreader work?
A drop spreader works by dropping the seeds through a dropper. These droppers tend to be small, and this is quite helpful for working in space-constrained areas. A mini garden or a yard that isn’t too big can be easily covered with a drop spreader.
Is it easy to use a drop spreader?
But since these machines are small, it can take you quite some time to cover a land, especially if it’s large. There’s no option in a drop spreader to adjust the rate of seed dropping.
Is Scotts a good lawn spreader?
Herein, using a spreader can make the task of lawn maintenance much easier. Scotts is one of the best spreader brands. To use them effectively, it’s important to know the Scotts spreader settings well. So, in this guide, we’ll talk about what the setting means and how you should adjust the numbers depending on your work context.
Can you adjust the rate of seed drop?
There’s no option in a drop spreader to adjust the rate of seed dropping. However, precise control can be achieved by moving fast or slow. The seeds drop at a stable rate. So, if you want a ground to cover with more seeds, walk slowly over the area. And if you want less seed coverage, walk fast.
