How do you use Acrytex primer?
- Prime surface with BOYSEN ® Acrytex ™ Primer #1705.
- Spray BOYSEN ® Acrytex ™ Cast #1711 with mortar gun. Press Acrytex ™ Cast with wooden roller 10-15 minutes after spraying.
- Apply 2-3 coats of BOYSEN ® Acrytex ™ Topcoat of desired sheen by brush, roller or spray.
What is Acrytex primer for?
Boysen Acrytex Primer is an acrylic solvent-based paint that forms a non-porous, seamless, watertight film that serves as a moisture sealant for concrete and a stain inhibitor for wood. It's perfect for bare interior and exterior masonry and wooden surfaces.
How do you use Acrytex?
Spray BOYSEN® Acrytex™ Cast # 1711 with mortar gun. Press Acrytex™ Cast with plain wooden roller 10-15 minutes after spraying. Wet wooden roller with water to prevent the roller from sticking to the cast. Finish with two (2) coats of BOYSEN® Acrytex™ Topcoat to desired sheen.
What is Acrytex paint used for?
Boysen® Acrytex™ is an acrylic solvent-based coating that forms a seamless, non-porous, watertight film that repels water and prevents seepage. It is noted for its excellent adhesion and long-term durability. Creates a very tight film, serving as a moisture sealant for concrete and a stain inhibitor for wood.
How do you use Boysen primer?
SURFACE PREPARATION: Treat new masonry with a solution of 1 part BOYSEN® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.
What is Acrytex tinting color?
DESCRIPTION: BOYSEN® Acrytex™ Tinting Colors are concentrated acrylic solvent-based tinting colorants for BOYSEN® Acrytex™ products. They mix easily and produce tints from pastel to medium shades. MIXING: For darker shades, request for factory-mixed colors.
What is a latex primer?
Latex primers are water-based and ideal for prepping unfinished drywall for painting. They are more flexible and fast drying, and are less brittle than oil-based primers, making them less susceptible to peeling and cracking.
Is Acrytex water based?
BOYSEN® Acrytex™ Boysen® Acrytex™ is an acrylic solvent-based coating that forms a seamless, non-porous, watertight film that repels water and prevents seepage. It is noted for its excellent adhesion and long-term durability.
Can I use Permacoat on wood?
PRINCIPAL USES: For interior and exterior such as concrete, stucco, bricks plaster, hollow blocks, drywall surfaces, and properly primed wood.
How do you mix a patching compound?
1:193:20How to mix your own filler when patching or filling holes ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use scrapers and mix it with a scraper. So what you do from here is just drag the forth nowMoreYou can use scrapers and mix it with a scraper. So what you do from here is just drag the forth now so I've edges in a little bit.
What is concrete primer used for?
Concrete primer is specifically designed to absorb into the surface of concrete, filling imperfections and creating a smooth surface for the paint. Most primers will dry in a few hours, but home improvement professionals suggest waiting a full eight hours after priming before applying paint just to be sure.
Which is better red oxide or epoxy primer?
Epoxy Primer has better chemical resistance, abrasion resistance and adhesion than Redoxide. Epoxy primer will chalk under UV, thus a topcoat is recommended when used outdoor. Redoxide on the other hand has better UV resistance, easier to apply because it is one part and cost cheaper than Epoxy Primer.
What kind of thinner do you use for epoxy primer?
What is Thinner 200 used for? Epoxy Primer Thinner 200 is used as a thinner for 2-part epoxies like TotalProtect, Aluminum Boat Barrier Coat, and 2-Part Epoxy Primer systems (surfacing, high-build, and clear). It is also used as a pre-paint surface prep solvent for inflatable boats, and to clean painting equipment.