How to Use Vise Grips
- Step 1. Grasp the locking pliers in your hands and open them by pressing the tab on the inside of one handle.
- Step 2. Place the mouth of the pliers around the object you want to hold or turn.
- Step 3. Squeeze the handles together tightly around the object. If necessary, adjust the size of the mouth to grasp the...
How do you use a Vice Grip pipe wrench?
The new vice grip pipe wrench has a large button that you depress, which unlocks the teeth from the grooved channel built into the center of the wrench. Simply slide the handle up and down until the pipe wrench jaws are in the position you desire.
How to use a vise grip?
How to Use Vise Grips 1 Grasp the locking pliers in your hands and open them by pressing the tab on the inside of one handle. 2 Place the mouth of the pliers around the object you want to hold or turn. 3 Squeeze the handles together tightly around the object. ... 4 Pull or turn the object with the pliers until you loosen it or remove it. ...
Who invented the Vise-Grip?
William Petersen was a Danish immigrant who invented the first locking pliers in his blacksmith shop, and began selling them from the trunk of his car to farmers and people in surrounding towns. He patented his new idea and called it Vise-Grip.
How much force can a Vice Grip pliers handle?
Vice grip pliers use various pivot points and levers to operate the device, so when being used, the force applied is exponential. For example, if you apply 15 pounds of pressure onto the vise grip pliers handle, then 150 pounds of force may be applied.
How do you use a vise wrench?
0:261:05How to Use Vise Grips - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen them by pressing this little release lever. Place them over the object you want to grip. AndMoreOpen them by pressing this little release lever. Place them over the object you want to grip. And twist the adjustment knob until the jaws are snug.
How do you loosen a vise grip?
Pull or turn the object with the pliers until you loosen it or remove it. Press the tab on the inside of the handle to release the mouth of the pliers after you finish pulling or turning the object.
When should you use a vice grip?
Vise-grip pliers have a myriad of uses beyond removing broken screws and loosening frozen nuts. You can use them to clamp small things in place, to remove stripped or broken screws and even to open a zipper when the pull breaks off.
What is the difference between a vice grip and wrench?
Like: a vise grip uses the principle of the lever and the principle of wedging and the pipe wrench uses the principle of a squashing rhombus, with sharp bitey teeth and levering and wedging to grab a pipe in one direction and release in the other.
What's the difference between pliers and vise grip?
Locking pliers (also called Vise-Grips, a vice grip, or a Mole wrench) are pliers that can be locked into position, using an "over-center" cam action. Locking pliers are available with many different jaw styles, such as needle-nose pliers, wrenches, clamps and various shapes to fix metal parts for welding.
What is a vise clamp?
A clamp-on vise is a light-duty bench vise secured to a board, table, or bench by a vise-type screw on its base.
How do you remove a broken bolt from a vice grip?
0:000:36How To Remove Damaged Stripped Rusty Bolt With Vise Grip PliersYouTubeStart of suggested clipEnd of suggested clipHead on it it was just chewing itself apart so before I really destroyed it I got sort of likeMoreHead on it it was just chewing itself apart so before I really destroyed it I got sort of like alligator vise grips. And I clamped those on to the bolt. And as you can see that'll.
What are needle nose vise grips used for?
These can be used to grip and pull nails and fasteners, hold a workpiece in place, and they can even be used as a replacement knob for a machine. You can depend on locking pliers for anything you need to securely hold.
What do channel locks look like?
1:053:23Bad Daddy Braddy Teaches The Right Way to Use Channel-locksYouTubeStart of suggested clipEnd of suggested clipThis falls off so channel locks are a directional tool they're meant to be you know grabbed and heldMoreThis falls off so channel locks are a directional tool they're meant to be you know grabbed and held onto.
Are vice grips a wrench?
IRWIN Tools VISE-GRIP Original Locking Wrench with Wire Cutter (8). Heavy-duty jaws lock on to three sides of a hex fastener, and won't slip or mar the work piece.
What precaution should be observed when using an adjustable wrench?
What should I avoid doing when using wrenches?Do not use push on a wrench - losing your balance is more likely if the wrench slips.Do not use a wrench that is bent handle or damaged.Do not use worn adjustable wrenches. ... Do not pull on an adjustable wrench that is loosely adjusted.More items...
Why are mole grips so called?
In 1947, Thomas Coughtrie went to work for the Birmingham engineering company, M K Mole and Son, and, after the death of the joint managing directors and Mole brothers, became the managing director. In the 1950s Thomas Coughtrie patented his own version of the locking pliers and called them 'Mole grips'.
When were vise pliers invented?
According to the Living History Farm website, William Petersen patented a primitive version of the Vise Grips in 1921. In 1957, the final version of the Vise Grips still used today debuted. Use locking pliers to clamp objects where other types of vises or tool will not fit. Advertisement.
What is a Vise plier?
A versatile pair of pliers that locks effectively around different objects, the Vise Grips is small enough to grasp even tiny screws, yet it has a strong grasp that will not let go until you release it.
How to remove glue from a pliers?
Press the tab on the inside of the handle to release the mouth of the pliers after you finish pulling or turning the object. Alternatively, if you use the pliers to hold an object (while gluing, for example), leave the pliers in position around the object until the glue dries and you are ready to remove the pliers.
How does a vise grip work?
How a Vise Grip Works. If you are mechanically minded, you may be interested in how things work such as that pair of vise grip pliers you always seem to be using. Regular pliers have 1 pivot point, but vise grip pliers have multiple pivot points that apply direct pressure to the handle as it is squeezed. A vise is really just something that applies ...
What is a vice grip?
Vice grip tools are ideal to use in any situation where you need a lot of force with little effort on your part. The new line of vise grip tools make it easier and faster for the professional to get their work done without having to worry about poor quality tools.
How much force is applied to a vice grip plier?
Vice grip pliers use various pivot points and levers to operate the device, so when being used, the force applied is exponential. For example, if you apply 15 pounds of pressure onto the vise grip pliers handle, then 150 pounds of force may be applied. So, with very little work on your part, a lot of force can be applied to that old, ...
Why do plumbers use thumb wheel?
Plumbers know it is a pain to have to turn the mechanical thumb wheel on regular pipe wrenches because it takes a lot of time. The new vice grip pipe wrench has a large button that you depress, which unlocks the teeth from the grooved channel built into the center of the wrench.
Can channel lock pliers be used with vice grip?
After use, the jaws can loosen up, making the pliers useless. Vice grip channel lock pliers are now available that work just like the above-mentioned pipe wrench.
What to do if vise grips don't remove bolt?
If the vise grips do not succeed in removing a bolt, you have two options: using an extractor kit or using one of a few welding techniques. Use a bolt extractor if the head of the bolt has broken off or is otherwise inaccessible. You’ll need a center punch, a drill, a drill-extractor set (Easy-Outs), and WD-40.
How to remove a broken bolt with a vise?
8 Steps for Removing a Broken Bolt with Vise Grips: Saturate the bolt joint with penetrating oil, which should help lubricate the threads. Allow the oil to soak in over several days. Locate the bolt you want to remove and decide whether you need straight-jaw or alligator vise grips.
How to remove bolt from drilled hole?
Insert the Easy-Out into the hole you’ve drilled and use a hammer to tap it into place in the bolt shank. When the Easy-Out is secured, use a wrench or pair of flat-nose pliers to grip the end of the Easy-Out. Turn the Easy-Out counterclockwise to remove the bolt shank from the hole.
How to remove a bolt that is stuck in cold water?
Placing with bolt immediately in cold water may crack it. You may attempt using a breaker bar or vise grip again to remove the bolt. Apply paraffin candle wax to stuck bolt threads, which will hopefully lubricate the threads and allow you to unscrew the nut.
How to adjust plier mouth?
Locate the plier mouth adjustment bolt at the end of the fixed handle. Screw clockwise for smaller objects and counterclockwise to accommodate large objects. Place the jaws on the bolt to size for adjustment. If you squeeze the handles and the jaws don’t lock, you’ll need to make the mouth wider.
What do you need to break a bolt?
You may need a breaker bar, a propane torch, wax, transmission fluid with acetone, a drill, a nut-splitter, or an angle-grinder. Use any one or a combination of these methods to break corrosion force and break a stubborn bolt for removal. Use blunt force to break corrosion bonds.
How to repair a hole in a thread?
Remove the tap and clean the hole. Coat the threads with thread-locking material ($5-$7) to seal the repair. For very damaged threads, follow the above steps and then use a chemical filler to further repair the threads. After using the filler, immediately insert a bolt. Wait for the filler to dry, then remove the bolt.
How do you use Grip pliers?
For flat-surface pliers, find an area to grip where the pliers can be pulled at without slipping off. Once the pliers are secure (if you’re using Vise-Grip-style pliers), squeeze both handles together with one hand and then use the other hand to tighten the screw at the bottom of the handle.
How do you release vise grip pliers?
Pull or turn the object with the pliers until you loosen it or remove it. Press the tab on the inside of the handle to release the mouth of the pliers after you finish pulling or turning the object.
Is it vise grip or vice grip?
In American English, the noun vise refers to a gripping or clamping tool. As a verb, vise means to force, hold, or squeeze as if with a vise. In both cases the British spelling is vice.
What do channel lock pliers look like?
Channel lock pliers are a set of pliers that have an angled head where one handle slides to adjust the size of the opening used to pinch and grab without affecting the distance between the handles.
How do C clamps work?
The C-clamp is used by turning the screw through the bottom of the clamp’s frame until the amount of pressure needed to hold the workpiece has been reached. If the clamp is being tightened, then the workpiece being secured is fixed between the flat end of the screw and the flat end of the frame.
What are the types of pliers?
Pliers are used to grip, position, tighten, loosen, and cut certain metal elements. Learn about five types of pliers: slip-joint, water-pump, linesman, locking and needle-nose.
How much is a vice grip?
Compare with similar items This item IRWIN VISE-GRIP Original Locking Pliers with Wire Cutter, Curved Jaw, 10-Inch (502L3) Customer Rating 4.8 out of 5 stars (3579) Price $1255 Shipping FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime Sold By Amazon.com.
What is vise grip?
Like: a vise grip uses the principle of the lever and the principle of wedging and the pipe wrench uses the principle of a squashing rhombus, with sharp bitey teeth and levering and wedging to grab a pipe in one direction and release in the other.
What is welded jaw on pipe wrench?
The welded jaw on a pipe wrench is on the movable side and can be completely remove from wrench for replacement if worn. The stationary side is pin in to the handle for replacement. The spring is to hold the jaws open. Teeth are designed engage the over the crown of the pipe.
