The following steps will show you how to use a manual drain snake or auger: Locate the clogged drain. The clogged drain is usually located at the bottom of the drain pipe. If you are unsure where the blockage is, try using a plunger to clear the clog; proceed to the next step if it’s not working. Insert the end of the cable into the drain pipe.
- Step One: Insert the drain auger into the drain or toilet. ...
- Step Two: Turn the handle of the drain snake clockwise and slowly push. ...
- Step Three: When you've found the blockage with the drain auger, pull it out without rotating the drain.
What is the difference between Auger and Snake?
- A vinyl guard on the wire to protect the porcelain
- Durable construction that is both kin-resistant and corrosion resistant
- Works in WaterSense and water-efficient toilets
How to make a post hole auger?
Using a Post Hole Digger Stand for Your Tractor Auger
- Using a Post Hole Digger Stand for Your Tractor Auger. If you've got the best tractor auger to use on your land, you've spent a decent chunk of change on ...
- Post Hole Auger Stand Plans. ...
- Building a Post Hole Digger Stand: How Do You Make a Post Hole Digger Stand Video. ...
What size Auger do you use?
What size auger do you use?
- 12dbsinad. For setting 4x4 PT posts, what are your opinions on auger size? ...
- EVT. I have had no issues with the 9 inch auger. ...
- Bubber. I'm with EVT, I use a 9" for 4x4 posts. ...
- DeereBoots. I have both auger sizes: 9 and 12 inches. ...
- MTB98. Agreed that 9” is best for 4” posts. ...
- Gizmo2
- jdmich
- Dr Kubar. Another vote for 9.
- 12dbsinad. Thanks for the feedback guys!
- ddinham. ...
How to use a Cobra Auger in a washer drain?
- Pistol-grip handle with rubber over-mold helps minimize hand fatigue and enhance comfort during operation
- Lever-style cable lock secures cable in place and allows for easy adjustments
- For most sink, shower and tub drains
How do you use a manual snake to unclog a sewer line?
0:112:15How to Snake a Clogged Drain | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt starts by removing the strainer.MoreIt starts by removing the strainer.
How do you snake a drain with an auger?
How to Use a Drain AugerStep One: Insert the Drain Auger. Grab your drain auger and insert the end of it into the drain or directly into your toilet. ... Step 2: Navigate The Drain Auger Towards The Clog. Crank the handle clockwise as you slowly push the drain snake into the toilet. ... Step Three: Pull the Drain Auger Out.
What is the difference between an auger and a snake?
Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain.
How do you use a mechanical drain snake?
3:274:17How to use a Drain Snake - Plumbing Snake - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then slowly pulling it back. And if it doesn't pull easily by hand then what you can do isMoreAnd then slowly pulling it back. And if it doesn't pull easily by hand then what you can do is tighten that rod. And then slowly pull it again keeping the drill in a forward motion.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
Should I snake my own drain?
For smaller clogs, snaking your own drain is possible. Routine, minor sink clogs from hairballs or food remnants are typically located in the U-shaped trap directly below the sink or only a few feet deeper in the drainpipe. They may be cleared by using a light-gauge, hand-operated auger.
Do you need a auger and a snake?
Plumbing snakes stand the middle ground between household plungers and drain augers. If you've got a clog too stubborn for a plunger, then you need to employ a snake.
Should you snake a toilet?
To clear a clog in your toilet without a plunger, or if plunging hasn't worked, a toilet snake can help you return to a functioning flush (sigh of relief). To get started, put on a pair of rubber gloves and make sure you've located the water supply in case you need to quickly restrict the water flow.
How do you recoil a drain snake?
To recoil a drain snake, you insert the new cable through the hole in the back and guide the wire around the outer perimeter of the auger's drum. Once you establish a foundation around the edge of the container, you will retract the wire back into the machine as normal.
How do you snake an outside drain?
0:249:35How to use a sewer snake to unplug a clogged drain pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere's our main drain ours through the floor because we redid this just a couple of years agoMoreHere's our main drain ours through the floor because we redid this just a couple of years ago sometimes they are mounted on your piping system here.
How do I unclog my main sewer without a cleanout?
All you need to do is take a cupful of baking soda and pour it down the drain. Consequently, pour a cupful of white vinegar down the same drain. Thereafter, wait for around 10-15 minutes for the baking soda and vinegar solution to break up and clear the clog.
How do you get a drain snake past a trap?
How to Get Past Corners With Drain AugersPlace the cable of the drain auger at the beginning of the drain opening.Turn the handle for the drain auger clockwise to start the cable through the drain.Pull the cable back a little when you reach a corner by turning the handle counterclockwise.More items...
How to clear a drain with an auger?
Steps to Clear a Drain with an Auger. Step 1 : Make sure your supplies are at hand. You'll actively be using your rubber gloves and the drain auger in many cases, but make sure the rest are in an easily accessible area for when you need them. Step 2 : Clean out the drain.
What is the difference between a manual and electric drain auger?
Within the names of each tool, you maybe already able to tell the difference. But a manual auger is one that you crank by hand through the clog and pull it back out. With an electric drain auger, you’re able to use machine power to push it through a clog and pull it out.
How does an electric drain auger work?
With an electric drain auger, you’re able to use machine power to push it through a clog and pull it out. Because the way you operate each tool is different, there are some slight differences between the ways you go through the steps of unclogging a drain with each.
How to check if a snake is hooked?
Continue cranking clockwise with gentle but firm pressure until it is hooked. You can check this by periodically pulling up slightly to see if you have gotten it yet. Rotating the snake itself will either break up a smaller object that isn't very solid, or has gotten entangled within a solid clog. This makes it so you can pull out the clog or let it be washed down the drain
Why are plumbers snakes good to keep on hand?
They are good to keep on hand because getting a clog within a drain that won’t come out with a plunger is always a possibility.
Can a plastic snake unclog a bathroom sink?
Before getting started, make sure you have the right one for the job. Sometimes small plastic drain snakes are sufficient to unclog bathroom sinks of hair and debris that are near the surface, while larger drain augers are needed for more serious clogs further down the plumbing system.
What snake to use for clogs in drain?
The best snake for clogs deep inside a drain is the Husky Drain Auger. With 50 feet of rust-resistant cable and spring steel wire, you can get to clogs a standard drain snake can't reach. It's best to use this long snake for the main sewer, laundry, or driveway drain.
Can you take apart a U-shaped drain pipe?
This is the U-shaped curve underneath the sink to prevent clogs from clogging the home’s entire drain pipe system ,
How to keep sink auger clean?
Tips for Keeping Your Auger Clean. Wipe off the cable as needed while pushing it back into the auger drum. Rinse the corkscrew end thoroughly. Sink auger cables are stainless steel, which technically doesn't rust, but you can get a rust-like coating on the cable, due to material and water left on the cable.
What is a sink auger?
The sink auger is also called a "drum auger" or "canister auger" because of its configuration. It consists of a flexible cable with a corkscrew end (the business end). The cable is coiled within a drum canister.
How to clean a cable from a drum?
When the cable end emerges, clean off all debris from the corkscrew tip and throw it in the trash (not back down the drain!). Run hot water from the sink faucet to flush the drain, and make sure the water is flowing.
Step 1
You’ll first need to get hold of a plumber’s snake, either manual or electric. Some manual models do allow you to attach an electric drill to give the tool more power to push through and break up the clog.
Step 2
Before you begin, put on a pair of rubber gloves and goggles (especially if you had tried a chemical drain cleaner earlier on), and have a bucket on hand. Then, insert the snake into the drain and slowly feed the line down the pipe. It may take a few tries to get it going.
Step 3
As it descends, a tight bend in the pipe may require you to crank the handle a little harder or wiggle the wire, but don’t give up—keep turning. At some point the snake will reach the blockage. When it does, the rotating tip will either break it up as it moves down the pipe or grab hold of the gunk so that you can pull it out.
Step 4
When you can’t feed the coil any more, simply turn the handle to wind the snake back out of the drain. Chances are the clog will come out with it, either in pieces or as a solid chunk. Detach the debris from your snake and test to see if your pipes are clog-free by running the water or flushing the toilet.
4 Different Types of Drain Auger Or Plumbing Snake
How to Prevent Clogged Drains
- In order to prevent clogged drains, it is important to take care of them and not put anything down the drain that shouldn’t be there. Here are a few tips for preventing clogged drains: 1. Install a strainer on your sink drain to catch food particles and other debris. 2. Don’t pour grease or cooking oil down the drain. 3. Don’t put hair or other deb...
Conclusion
- Clogged drains are a common problem, but they can be easily fixed with a drain auger or a plumbing snake. These tools are easy to use and can be purchased at most hardware stores. Be sure to consult a professional plumber if you are unsure how to use either of these tools. They will be able to help you clear the clog and get your drains functioning properly again. They may also …
Frequently Asked Questions
- Can I snake my own drain?
Yes, you can snake your drain, but be careful not to damage your pipes. By following the steps mentioned above, you should be able to clear most clogs. If you are not comfortable or unsure of how to do it, consult a professional plumber for help. - How far should a snake go down a drain?
A drain snake is usually about 15 to 25 feet long. It should be inserted into the drain as far as possible in order to reach the clog, but be careful not to damage your pipes.