How do you use a Magnum LTS 15 sprayer?
- Turn power OFF.
- Turn pressure to lowest setting.
- Turn prime valve down (to open position).
- Remove filter assembly and assemble airless spray gun without filter.
- Remove guard and SwitchTip.
- Clean filter, guard and SwitchTip in flushing fluid (water, paint thinner etc.).
What is a magnum LTS 15 sprayer?
DIY homeowners and handymen get cost-efficient, high-speed performance with the Magnum LTS 15. These sprayers are ideal for painting all types of indoor projects, or tackle outdoor projects like decks, siding, fences or small homes.
What are the safety precautions for Magnum LTS 15 and LTS 17?
Magnum LTS 15, LTS 17, and ProLTS 19 Airless Sprayer 332695C EN - For portable spray applications of architectural paints and coatings - LTS 15 and LTS 17 ONLY:Use water-based or min- eral spirit-type materials only. Do not use materials having flash points lower than 100° F (38° C).
How many gallons per minute does the LTS 15 spray?
When combined with the SG2 gun, this unit can spray an impressive 0.27 gallons per minute. While the LTS 15 comes with a 25 ft DuraFlex hose, the pump can be hooked to up to 75 feet without affecting the quality of the spray or over-working the motor.
How do you identify an airless spray gun LTS 15?
Component Identification LTS 15 A Airless spray gun Dispenses fluid. B Power switch Turns sprayer ON and OFF. C Pressure control knob Increases (clockwise) and decreases (counter-clockwise) fluid pressure in pump, hose, and spray gun. C1 Setting Indicator To select function, align symbol on pressure control knob with setting indicator, page 13.
How to unclog spray tip?
When flushing or relieving pressure hold metal part of the spray gun firmly to the side of a grounded answer?
How to reduce risk of injury from motor starting unexpectedly when it cools?
What is high pressure spray?
When to engage trigger lock on a gun?
Can you set the pressure on a sprayer to maximum?
See more
About this website
How do you use a Magnum sprayer?
0:522:58Magnum Quick Start - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition turn the power switch on the sprayers motor should begin to run. When the paint comes outMorePosition turn the power switch on the sprayers motor should begin to run. When the paint comes out of the drain tube turn the sprayer. Off disengage the gun trigger lock.
How do you start a Magnum paint sprayer?
2:186:13Magnum Operation - Startup - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhile you turn the prime spray valve to the spray position then turn the power switch. On. ContinueMoreWhile you turn the prime spray valve to the spray position then turn the power switch. On. Continue triggering the gun into the waste pail until you see paint coming out of the gun release the trigger
How do you use an electric Graco Magnum sprayer?
10:1840:11How to use the Graco Magnum Electric Airless Paint SprayersYouTubeStart of suggested clipEnd of suggested clipThe sprayers motor should begin to run when paint comes out of the prime tube release the triggerMoreThe sprayers motor should begin to run when paint comes out of the prime tube release the trigger safety on the gun and squeeze the trigger into the waste. Pail.
How do you use the Graco airless spray gun?
Prime the PumpEngage the trigger lock.Remove the tip and guard from your gun.Place the fluid intake hose into a paint pail and place the drain tube into a waste pail.Be sure the prime valve is in the PRIME, or DRAIN, position.Turn the pressure control to the lowest pressure setting.Turn the on/off switch to ON.More items...
How do you set up a paint sprayer?
2:457:37How to Use a Paint Sprayer - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow what I'm going to do is I'm first going to cycle paint through the pump by priming it then I'mMoreNow what I'm going to do is I'm first going to cycle paint through the pump by priming it then I'm going to cycle paint through the line. Then I'm going to install my tip housing in my tip.
How do you use a paint sprayer?
13:2226:52How to use a paint sprayer - YouTubeYouTubeStart of suggested clipEnd of suggested clipMove across the surface in order to keep the gun pointed straight at the surface Fanning. The gun toMoreMove across the surface in order to keep the gun pointed straight at the surface Fanning. The gun to direct the spray at an angle causes an uneven finish flex your wrist at the beginning.
Do you have to thin paint for Graco sprayer?
Yes, the latex paint does need to be thinned. Even though latex paint is water-based, it is thicker than the oil-based paint varieties. The thick latex paint needs to be thinned to be able to spray a fine mist of paint.
How do you prime a Graco Magnum sprayer?
1:425:22What to do when your Magnum sprayer won't prime or draw fluidYouTubeStart of suggested clipEnd of suggested clipStep remove the suction tube. And insert the pointed end of a pencil or a thin object into the inletMoreStep remove the suction tube. And insert the pointed end of a pencil or a thin object into the inlet and push up to free the inlet valve ball reattach the suction tube. With the suction tube in the
How do you use an electric paint sprayer?
0:241:21How To Use Paint Sprayers - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore you start test and adjust the nozzle to the consistency. You want use the slope continuousMoreBefore you start test and adjust the nozzle to the consistency. You want use the slope continuous motion up and down and side to side and remember to clean it thoroughly when you're done.
How do you set up a Graco paint sprayer?
0:429:59How to Set up your Graco Airless Paint Sprayer [QuickStart GuideYouTubeStart of suggested clipEnd of suggested clipWe have our main paint hose. And you'll just need to tighten that up with a wrench or a spannerMoreWe have our main paint hose. And you'll just need to tighten that up with a wrench or a spanner because this unit runs at a high pressure we'll have to make sure it's more than hand tight.
How do I adjust the pressure on my airless sprayer?
6:106:55How to set the correct spraying pressure on your airless. - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure your pump is in working order and then slowly turn up your pressure into all your linesMoreMake sure your pump is in working order and then slowly turn up your pressure into all your lines are gone and that's your optimal spray pressure avowedly from where sprayers.
How does a airless spray gun work?
An airless sprayer works by pumping paint at a very high pressure, up to 3,000 psi, through a hose and out a tiny hole in the spray gun tip. The tip is designed to break up the paint evenly into a fan-shaped spray pattern of tiny droplets.
Frequently Asked Questions – Magnum, Truecoat Product Lines | Graco
If you have a question, chances are good that someone else has asked it too. Browse our library of customer frequently asked questions, and find your answers fast, here.
What is a Magnum LTS 15 paint sprayer?
Magnum lts 15 paint sprayer has hardened high quality piston pump. It delivered high pressure power that can easily cover big area. For small to mid level job it can adjustable pressure control and increases sprayer life.
How to prevent over spraying?
N.B. To prevent over spray you need a little practice. Simply slight spray the unit and hose with silicon spray. This will protect drips from adhering to the sprayer.
Is a Graco spray gun good?
Graco lts 15 has a good spray gun with an internal filter. It capable to blow 1800 PSI of paint through the gun which is easy to operate.
Can you use a Graco sprayer in multiple containers?
This Graco sprayer has flexible section tube. It can capable to used in multiple containers. When spraying a large job, you can pull paint directly from 5 gallon paint bucket to keep continue consistent flow.
Is the Graco LTS 15 the same as the X5?
Talking about the relatively comparison to some other models, this Magnum lts 15 paint sprayer is much similar their previous model magnum 262800 X5 sprayer. Recently they upgraded all necessary features and added some accessories for consumer needs. If, you’re seriously more info about it then don’t miss out to check our complete Graco magnum x5 reviews. Since you are going to notice that the Graco lts 15 vs x5 have few performance differences from one to another.
Can you paint a house with a Graco sprayer?
If you’re thinking about painting your homes and you’re a first timer looking to save some money, won’t disappoint. Based on our extensive evaluation, DIY handyman and large homeowners know that it is easy to save time and money. Even Graco lts 15 sprayer machine can deliver 10% more output In comparison to other models. Another plus point is that Commercial homeowners, property maintenance managers can paint rental properties, barns, decks, fences in a weekend or regular monthly basis also love this product.
Does the Magnum LTS 15 have a cart?
No cart: Due to enough lightweight portable magnum lts 15 paint sprayer, since it has no any cart attached in this version. When need to frequently transportation then the consumer can be sold extra @125 for cart purpose.
What tip does the LTS 15 use?
The LTS 15 uses a metal SG2 gun that feels solid and uses a full palm trigger for better control. It can be used with tips up to 0.015. “This model also comes with a 515 RAC IV tip which can eliminate clogs and is great for medium thick coatings with a pattern size width of 10-12. ”
How does the LTS 15 work?
The LTS 15 makes this simple with the PushPrime feature which allows the pump to be started with the push of a button. Priming is thus straightforward and much less of a hassle.
How many gallons of water does a LTS 15 pump use?
The recommended annual usage is 125 gallons which should be just fine for anyone working with basic home maintenance.
What is the best paint sprayer for interior walls?
When buying a paint sprayer the LTS 15 is one of the best options for someone looking to take on medium level projects like interior walls and ceilings as well as outdoor work like housing exteriors, fencing and doors.
What is the pump on a sprayer?
The pump is stainless steel which makes the sprayer reliable both in quality of performance as well as its lifespan. With proper care, you should not have to worry about investing in another sprayer for a very long time.
What materials can LTS 15 handle?
The LTS 15 is versatile in that it can handle most materials like acrylics, latex, and stains.
What is the most attractive feature of a paint sprayer?
Perhaps its most attractive feature is the PowerFlush adaptor. Anyone with some experience using paint sprayers knows that the worst and most time-consuming part is the cleaning process.
Graco Magnum X5 Paint Sprayer vs LTS 15 – Design
The most obvious difference between the two paint sprayers is in their appearance. The Graco Magnum x5 is bigger and taller than the LTS 15. On the other hand, the LTS 15 is wider and longer. Some similarity in appearance is seen in the blue and grey color of the two sprayers, including the 25 feet long hose that is blue for both of them.
Graco Magnum X5 Paint Sprayer vs LTS 15 – Size
The Graco Magnum x5 and Graco Magnum LTS 15 paint sprayers are made with home users in mind. They are light enough to carry and have a sturdy handle for easier lifting. The two machines have an attached hose of 25 feet, but the pump can support a hose as long as 75 feet.
Graco Magnum X5 Paint Sprayer vs LTS 15 – Cleaning
Paint spraying jobs will demand you to undertake a thorough cleaning of the surfaces that may be over-sprayed and the sprayer machines. With both the Graco Magnum x5 and the Graco Magnum LTS 15, you may need as much as 30 minutes to clean once you finish your project.
Graco Magnum X5 Paint Sprayer vs LTS 15 – Durability
Understand that these two sprayers are made for light, infrequent home-based projects. When used this way, the two can last you longer than when you use them continuously like you would for commercial projects.
Graco Magnum X5 Paint Sprayer vs LTS 15 – Versatility
Both the Graco Magnum x5 and Graco Magnum LTS 15 can handle different materials like acrylic, latex, stain or thick paint. If you choose any of these sprayers and get the right material for the surface you want to spray you are guaranteed of remarkable results.
Graco Magnum X5 Paint Sprayer vs LTS 15 – User Friendliness
The two models of paint sprayers have instructions on the manual and the accompanying demonstration video. They are packed as one compact unit with just a few parts that you may need to connect. If you follow the demonstrations on the video, fixing these parts will be unproblematic.
Graco Magnum X5 Paint Sprayer vs LTS 15 – Warranty
You should expect to enjoy a one year warranty should you choose any of these paint sprayers.
How to unclog spray tip?
If you suspect the spray tip or hose is clogged or that pressure has not been fully relieved after following the steps above, VERY SLOWLY loosen tip guard retaining nut or hose end coupling to relieve pressure gradually, then loosen completely. Clear hose or tip obstruction. See Unclogging Spray Tip in the Operationmanual.
When flushing or relieving pressure hold metal part of the spray gun firmly to the side of a grounded answer?
Maintaining grounding continuity: when flushing or relieving pressure hold metal part of the spray gun firmly to the side of a grounded metal pail, then trigger the gun.
How to reduce risk of injury from motor starting unexpectedly when it cools?
To reduce risk of injury from motor starting unexpectedly when it cools, always turn power switch OFF if motor shuts down.
What is high pressure spray?
High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that injection occurs, get immediate surgical treatment.
When to engage trigger lock on a gun?
Always engage the trigger lock when you stop spraying to prevent the gun from being triggered accidentally by hand or if dropped or bumped.
Can you set the pressure on a sprayer to maximum?
Pressure is set at maximum but can- not achieve a good spray pattern. Reversible spray tip is in UNCLOG position. Rotate arrow-shaped handle on spray tip so it points forward in SPRAY position, see Operation