How do you use a hunter sprinkler adjustment tool?
- Insert the plastic key end of the Hunter wrench into the adjustment socket.
- While holding the nozzle turret at the right stop, turn the wrench counterclockwise.
- Wrench will stop turning when adjusted to the minimum arc (40°). Do not go past this stop.
- Adjust to any arc between 40°-360°.
How do you adjust Hunter sprinkler?
How do you adjust a hunter rotating sprinkler head? To Increase the Arc. Insert the plastic key end of the Hunter wrench into the adjustment socket . While holding the nozzle turret at the right stop, turn the wrench clockwise. Adjust to any arc between 40° and 360°. You May Like Also.
How to adjust Hunter PGJ rotor sprinkler?
Increasing the Arc:
- Insert the plastic end of the Hunter adjustment wrench into the arc adjustment socket on top of the rotor.
- Holding the nozzle turret at its right stop turn the wrench clockwise.
- The wrench will stop turning when adjusted to the maximum arc (360 degrees), do not go past this stop. ...
How to adjust Hunter PGP?
Adjust to any arc between 40° and 360°. The wrench will stop turning, or there will be a ratcheting noise, when the maximum arc of 360° (full circle) has been reached. To Decrease the Arc. Insert the plastic key end of the Hunter wrench into the adjustment socket; While holding the nozzle turret at the right stop, turn the wrench ...
How to repair or rebuild a hunter sprinkler control valve?
How to Replace a Valve Solenoid
- Shut off the water supply to the sprinkler system.
- Remove the two wire connectors on the wires leading to the bad solenoid, then untwist the wires to separate them.
- Remove the old solenoid from the sprinkler valve by turning it counterclockwise.
How do I use the Hunter adjustment tool?
0:102:29How to Adjust a Hunter Rotor - Quick Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply install the allen wrench. Into. The raised arrow. And clockwise spins the screw down in frontMoreSimply install the allen wrench. Into. The raised arrow. And clockwise spins the screw down in front of the nozzle to deflect the spray.
How do you adjust the spray pattern on a Hunter sprinkler head?
1:063:48Hunter Spray Adjustments and Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction orMoreTurn the screw clockwise. If. You need to reach a little farther. Turn it the opposite direction or counterclockwise.
How do you use a sprinkler tool?
1:436:03Adjusting Hunter PGP Rotor Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you need to do is you need to grab the sprinkler. Right below the turret the top part here thatMoreWhat you need to do is you need to grab the sprinkler. Right below the turret the top part here that spins.
What tool is used to adjust a Hunter sprinkler head?
Hunter adjustment wrenchThe Hunter adjustment wrench consists of a 3/32 allen key, two convenient finger loops for gripping and an opposite side arc adjustment key for your Hunter PGP, PGJ, I20, I25 and I40 heads. The Hunter Rotor adjustment tool is used to make arc and radius adjustments on each sprinkler in Hunter's product line.
How do I adjust Hunter PGP?
0:181:45How to adjust a Hunter PGP sprinkler head - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you turn it counterclockwise to make it. And that go as far that way and you turn it towards A+MoreAnd you turn it counterclockwise to make it. And that go as far that way and you turn it towards A+ to make it go further that way and a little bit of a turn will make quite a bit of difference.
How do you adjust the Hunter PGP radius?
0:232:28How to adjust the arc and radius of a Hunter PGP Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook for the raised arrow on top of the rubber cap. And that indicates where the orifice is for theMoreLook for the raised arrow on top of the rubber cap. And that indicates where the orifice is for the nozzle. Simply install the allen wrench. Into the raised arrow. And clockwise spins the screw.
How do you use the Rainbird adjustment tool?
0:491:59How To Adjust A Rain Bird 5000 Series Rotor - YouTubeYouTubeStart of suggested clipEnd of suggested clipStop insert the tool into the arc adjustment hole until it seats then turn the tool in theMoreStop insert the tool into the arc adjustment hole until it seats then turn the tool in the appropriate. Direction clockwise to increase the arc. And counterclockwise to decrease.
How do you adjust Rainbird sprinklers?
To adjust your Rainbird sprinklers, twist the spray head to the right or left if you want to change the water's direction. To reduce the spray distance, use a flat-bladed screwdriver to turn the screw on the nozzle clockwise.
How do I adjust my Rainbird sprinkler heads 1800?
1:001:58Adjusting your Rainbird Turf Sprays (1800).mp4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo adjust these set the left side of the spray to the desired location. Then adjust the collar atMoreTo adjust these set the left side of the spray to the desired location. Then adjust the collar at the bottom of the nozzle to the right to get the desired spray.
Do you need a tool to adjust sprinkler heads?
Some sprinkler heads can be adjusted using a flathead screwdriver, while others require specialized adjustment and rotor tools. A simple turn of a screwdriver or specially designed tool is typically all it takes to adjust a sprinkler head.
How do you adjust Hunter MP rotators?
0:481:48How to Adjust Hunter's MP Rotator - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe radius with the radius adjustment screw on top of the nozzle. The radius can be reduced by 25%.MoreThe radius with the radius adjustment screw on top of the nozzle. The radius can be reduced by 25%. On all MP rotator models rotate the screw clockwise to decrease radius.
Community Q&A
Include your email address to get a message when this question is answered.
Tips
You’ll need a Hunter wrench key for most adjustments to Hunter rotor sprinklers. If you lost your key, don’t worry because you can get a new one anywhere that sells Hunter sprinklers or online.
About This Article
This article was co-authored by wikiHow staff writer, Danielle Blinka, MA, MPA. Danielle Blinka is a Writer, Editor, Podcaster, Improv Performer, and Artist currently living in Houston, TX. She also has experience teaching English and writing to others.
