You twist the grounds together 2 - 3 inches from the back of the box. You leave one of the grounds long, but trim the others. Then you slide the green wire nut with a hole in the end over the long wire down onto the twisted wires and screw it on.
How do you use a greenie wire nut?
1:242:42IDEAL 30-092 Greenie Grounding Wire Connector - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply pass one of the ground conductors through the hole in the top of the connector approximatelyMoreSimply pass one of the ground conductors through the hole in the top of the connector approximately six inches past the end of the greening wire. Connector.
Do you have to use green wire nuts for ground?
No. No NEC requirement for EGC wirenuts to be GREEN. Green can only be used on grounds. Any color can be used on grounds.
How do you connect a green ground wire?
If your light fixture has its own green ground wire you will need to connect the two ground wires using a wire nut. To use the wire nut simply insert the tips of both wires and turn the wire nut in a clockwise direction until tight.
Which wire connects to the green screw?
ground wireBasic Wire Color-Coding A white neutral wire usually connects to a silver-colored terminal or white wire lead. A green or bare ground wire almost always makes a ground connection—to a ground screw on a device, electrical box, or appliance case or to a green wire lead.
What is a green wire nut?
0:062:54How To Use a Greenie Wire Nut - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey are wire nuts that have a little hole in the top they are green because they are to be used forMoreThey are wire nuts that have a little hole in the top they are green because they are to be used for grounding. And you can see the hole it goes all the way through.
Do I need to cap a ground wire?
Wire nuts that are too small may initially feel like they are on the wire, but they, too, may fall off. Bare copper ground wires do not need to be capped. Similarly, BX cable's metal armor sheathing, which conducts to ground without the need for an additional ground wire, may be left alone.
What do you do with green wire without ground?
What to do When there is Nothing to Attach the Ground WireWhen you have a ground wire and there is no place to attach it then place a wire connector over the end, coil up the ground wire and push it back into the electrical junction box.IMPORTANT: Never cut the ground wire off.More items...
Do you connect green wire to bare copper wire?
The bare wire is the ground for the metal canopy. The green screw is the ground for the fixture bracket. The bare wire buried under the bracket is the ground from the circuit cable. They all need to be connected.
What happens if you do not connect the ground wire?
The appliance will operate normally without the ground wire because it is not a part of the conducting path which supplies electricity to the appliance. In fact, if the ground wire is broken or removed, you will normally not be able to tell the difference.
How do you connect a ground wire to a green screw?
1:072:05How to Connect Ground Wires in Light Fixtures - YouTubeYouTubeStart of suggested clipEnd of suggested clipGround make sure you make your loop. In the same direction that your nut is tightening up and thatMoreGround make sure you make your loop. In the same direction that your nut is tightening up and that will pull the wire underneath the screw.
Can I connect the green wire to the ground wire?
2:478:56How to Connect Ground Wires - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe ground wire from the green terminal on the receptacle.MoreThe ground wire from the green terminal on the receptacle.
Is green wire live or neutral?
Plug wiring coloursWireColourLiveBrownNeutralBlueEarthYellow and Green