How do you unlock the configuration menu on a Hayward pump? Press the 'Menu' until, 'Configuration Menu-Locked' appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from 'Locked' to 'Unlocked' (unit will beep).
How do I set the clock on my Hayward pool pump?
How do I set the time on my Hayward pool pump? STEP 1: Unlock configuration menu. STEP 2: Change clock setting. STEP 3: Press the mode button to set the start time. STEP 4: Press the mode button to set shutoff time. STEP 5: Press the mode button to save timer settings.
How do I Reset my Hayward?
Oh, and most Hayward reset settings are in the config menu, unlocked by pressing menu until 'configuration: locked' is shown, then holding the left and right arrows for like, 5 seconds until it unlocks.
How do you program a Hayward TriStar pool pump?
How To Program a Variable Speed Hayward TriStar Pump Step 1. POWER ON - Turn on the power to the pump. Step 2. SET CURRENT DAY AND TIME - Press the Menu button. You will see a screen that says "Configuration Menu Locked". Step 3. UNLOCK CONFIGURATION MENU - Press and hold down the < and > buttons ...
How do I unlock the configuration menu?
SET CURRENT DAY AND TIME - Press the Menu button. You will see a screen that says "Configuration Menu Locked". UNLOCK CONFIGURATION MENU - Press and hold down the < and > buttons until the screen changes to "Configuration Menu Press > to Enter".
How do I unlock my Hayward pool pump?
1:1211:44How To: Program A Hayward Super Pump VS - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'll hit menu. And it's locked so you have to press these two arrows. And hold them down for aMoreSo I'll hit menu. And it's locked so you have to press these two arrows. And hold them down for a couple seconds. And then it's unlocked okay so I'll press the right arrow.
How do I change the speed on my Hayward pool pump?
5:0011:37Hayward TriStar and EcoStar VS. How to Program and Drive ReplacementYouTubeStart of suggested clipEnd of suggested clipOn. Your next menu items speed selection changes speed units from rpm to a percentage of the max. IMoreOn. Your next menu items speed selection changes speed units from rpm to a percentage of the max. I prefer to keep it on rpm.
How do I reset my Hayward Aqua Plus?
You must reset the system by entering the 'Diagnostic Menu' and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
How do I program my Hayward Pro Logic?
0:2710:18ProLogic: Programming Basic Configuration - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo unlock a configuration menu press and hold the left and right arrow button simultaneously forMoreTo unlock a configuration menu press and hold the left and right arrow button simultaneously for approximately 5 seconds. Then press the right arrow key to enter the configuration menu.
How do I reset my pool pump timer?
0:001:08How to reset the timer on your pool pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right that's how you do it that's how you reset your pool pump when you lose. Power in theMoreAll right that's how you do it that's how you reset your pool pump when you lose. Power in the middle of night.
How do I reset my Hayward EcoStar pump?
According to the Hayward EcoStar user manual, all errors can be reset by pressing "Stop/Resume" when the error message is shown. You can also clear the code by cycling power applied to the pump after the error occurs.
How do you unlock the configuration menu on Goldline Controls?
0:1810:31Programming - Basic Configuration - Aqua Plus and Pro Logic - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo unlock a configuration menu press and hold the left and right arrow button simultaneously forMoreTo unlock a configuration menu press and hold the left and right arrow button simultaneously for approximately 5 seconds.
How do I reset my Hayward chlorinator?
Reset AquaRite Salt Chlorination Inspect Cell Light If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
How do you know when your salt cell is bad?
Further troubleshooting will be required.If the salt cell bubbles, but only a little bit, then you probably have a bad cell. ... If the salt cell bubbles vigorously, then it is working fine.If the salt cell is good, but you are are constantly getting a zero chlorine reading in the pool, something else is wrong.
Step 2
SET CURRENT DAY AND TIME - Press the Menu button. You will see a screen that says "Configuration Menu Locked".
Step 3
UNLOCK CONFIGURATION MENU - Press and hold down the < and > buttons until the screen changes to "Configuration Menu Press > to Enter".
Step 4
LOCATE TIME SCREEN - Press > twice and you should see the main time screen.
Step 6
CHANGE DAY - The day will be blinking. Press the + or - to change the day. Once the correct day appears, press > to move over to the time.
Step 7
CHANGE TIME - Once the hour is blinking, press + or - to change it. Press > to move over to the minutes and then AM/PM. Once the minutes and AM/PM is set, press > to take you to the next category (RPMS).
Step 8
SPEED SELECTION - After completely setting the time and hitting >, you'll move on to the RPM or % Selection. You can press + or - to switch between RPM's or %.
Step 9
MAX SPEED - The max allowed speed can be changed by pressing + or -. Once you have selected the max speed, press > to move on to minimum speed. Note: You may want to test the speeds by running the pump before programming the max and minimum speeds. Salt systems and heaters have minimum and max flow rates.