How do you unlock a toilet seat?
- Exam the toilet closely one again. For the majority of the cases, your toilet probably did have holes for underside access.
- Re – align the seat.
- Tighten the bolts.
- Check the tension and close the lid.
How do you remove a toilet seat without breaking it?
To remove the toilet seat, start by locating where the seat is joined with the toilet. If you can’t spot any bolts or screws from on top of the seat, check underneath. You should see the ends of a screw or a mounting nut. Use a wrench, screwdriver, or locking pliers to unscrew the seat off.
How to install a new toilet seat?
Remove the seat from the toilet. Collect the nuts, bolts, and any loose plastic or metal hardware (like the bolt covers) that also go with the seat. Put these small pieces into a sealable plastic bag and tape them to the seat so they don’t become lost. Your toilet seat is removed, now you can install a new one. [5]
How do you change a toilet seat with a screwdriver?
Swapping out used seats with new ones can be accomplished in less than 10 minutes and only requires a screwdriver. Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws. Put on the rubber gloves.
How do you remove a stuck screw from a toilet?
Method 1 Look at the back of the toilet and check from underneath to see if you can spot screws. ... 2 Put on your gloves and stick your hand to the back as you search for the ends of the screws. ... 3 Look at the upper section of the toilet to remove caps or whatever is hiding the bolts. More items...
How do you release a toilet seat?
0:157:55How to Remove and Install a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to do is press the two quick release buttons to remove the seat. So push this oneMoreFirst you need to do is press the two quick release buttons to remove the seat. So push this one this one on some seats you need to hold it in while lifting.
How do I remove a hidden toilet seat cover?
1:523:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook. You can see there there's a little screw on the top. And we need to tighten up that screw. SoMoreLook. You can see there there's a little screw on the top. And we need to tighten up that screw. So we can take a phillips head screwdriver. Tighten that one up nicely.
How do you open the hinge on a toilet seat?
0:231:37Hinge and Damper Replacement - Quiet-Close Toilet Seats - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull up on the bottom cover to remove. Next take your needle nose pliers. And pull each damperMoreAnd pull up on the bottom cover to remove. Next take your needle nose pliers. And pull each damper inward to release the hinge assembly from the toilet seat.
How do you lift a toilet seat without touching it?
0:050:54Now You Can Lift A Toilet Seat Without Using Your Hands - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd today we are showcasing the seat swing hands-free toilet seat this amazing device lists andMoreAnd today we are showcasing the seat swing hands-free toilet seat this amazing device lists and lowers without you needing to use your hands that's right a simple tap with your knee.
How do you remove an adjustable toilet seat?
1:263:51How to Remove and Replace a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we have here is like half of a butterfly nut. So I'll just hold that in place as I unscrew.MoreSo what we have here is like half of a butterfly nut. So I'll just hold that in place as I unscrew. Okay so I'm holding it with on one hand underneath. So we're just gonna unscrew. It.
How do you remove toilet seat caps?
0:182:56Remove Toilet Seat - Replacing a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm just going to grab the nut underneath. And I'm going to turn it counterclockwise. And onceMoreAnd I'm just going to grab the nut underneath. And I'm going to turn it counterclockwise. And once it loosens up you should be able to grab it back in.
How does a soft close toilet seat hinge work?
A slow close toilet seat is basically one that closes on its own as soon as you start to push it down. What is this? Gravity controls it but special, tensioned hinges control the gravity. This is where the slow part comes in so there's no slamming down.
How do you remove top fix toilet seat fittings?
0:5010:18How to change a Pressalit toilet seat with top fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all the fixing is done through the top of the toilet. So the first thing to do is to remove theseMoreSo all the fixing is done through the top of the toilet. So the first thing to do is to remove these caps from the toilets or access the fixings. The next stage is to remove the cap.
How do you adjust a modern toilet seat?
0:071:27Fixing a loose toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we tighten up the screws. On the toilet seat right make sure you don't do up let's theMoreAnd then we tighten up the screws. On the toilet seat right make sure you don't do up let's the screws too tightly. Okay make sure it's nice and adjusted. So it's in line with the pan.
Should we close toilet lid?
"Closing the lid reduces the spread of droplets,” Hill explained. If you're in a public bathroom where there is no toilet seat to be found, keep as clean as possible by not leaning over the bowl when you flush and washing your hands immediately afterward. The good news?
How to get a toilet seat off?
Lift the toilet seat at 90 degrees to the toilet and simply lift it off. For some models of toilet seats you may need to push one or two buttons in order for the seat to release. The mounting base is covered with a plastic cap matching the color of the seat or one made of chrome. Pry it out.
How to slide a Kohler toilet seat backwards?
Other brands like Kohler toilet seats you will only need to slide the seat backwards only. Take your screwdriver and engage the top of the bolt. Using your other hand, reach for the wingnut underneath the toilet bowl. Hold the wingnut with your hand as you unscrew the bolt with the screw driver.
What is a soft close toilet seat?
Most soft close toilet seats are a combination of either top-mount and quick-release mechanism or bottom-mount and quick-release mechanism. Standard soft close toilet seats have no quick-release mechanism and are fixed from the bottom. The top-mount unlike the bottom-mount soft close toilet seats gives the persons removing or installing them ...
Do you need to bend a wingnut to remove a toilet seat?
You don’t need to bend to screw in a wingnut from under neath the bowl. The quick-release soft close toilet seats to make are desirable for sanitary purposes. It is easy and quick to remove the toilet seat while cleaning. You just push a bottom or two for that matter and slide the seat out.
Do soft close toilet seats last forever?
Soft close toilet seats are a very welcome innovation given how irritating toilet seat slamming can be. It is unfortunate that just like the non-soft close toilet seats they don’t last forever. At one time you will need to replace them. Knowing how to remove a soft close toilet seat helps.
Can you use a wrench to remove a toilet seat?
If the bolt and nut are metallic and corroded, you should use a wrench to make it loose. Once the bolts are out lift off the toilet seat. This is also how you would need to remove this toilet seat if you wanted to clean it. The quick-release toilet seats were designed to solve this problem.
How to clean rust off toilet seat?
Take out the nuts and screws. Place them away as you wait to replace them. Put them in a plastic bag more especially if made with metal to avoid rust. Now take out the toilet seat and wipe down with a piece of cloth or paper towel.
What are hidden fixings on toilets?
Hidden fixings are common with modern toilets as people don’t want to see bolts on their toilets, plus it prevents them from damage. Look at the back of the toilet and check from underneath to see if you can spot screws. Again, they could be metal or plastic.
How to prevent a toilet from scratching?
Use your knife to cover the porcelain that is around the bolt head to prevent accidental scratches as you saw through. Secure the rest of the toilet with masking or duct tape as you don’t want to hack through any other part of the toilet. Cut through the bolt along with the hinges connected to the toilet seat.
How to unwound wingnut on toilet?
You could use a socket wrench to get a deeper , firmer grip on the metal hinges then use your hands to unwound the wingnut underneath the toilet. The socket should be about half an inch wide so it can fit over the bolts easily.
What to do if you didn't cut well?
For any area you didn’t cut well, use the knife to scrape it off.
Can you remove a toilet seat with bolts?
Depending on the type of toilet brand you have, the bolt s could be made from metal or plastic, some with bolts caps, some without. Nonetheless, the process of removal is similar. Take a look at a step-by-step guide on how you can remove a toilet seat.
Can you unscrew a seat with metal hinges?
Removing Seat with Metal Hinges. If the bolts securing the seats are made of metal, you could use a pair of pliers to unscrew them. But metal hinges have one disadvantage, they rust. This means that even the pliers may be unable to unscrew the bolt.
What is the best way to unclog a toilet?
Dish detergent, enzyme-based drain openers are the best and safe to use to unclog a toilet.
How to flush a toilet bowl when it doesn't resemble a toilet?
If it doesn’t resemble to be managing, flush the toilet thoroughly. Apply a little extra pressure on the bowl to fill it along with suction.
How to cover a toilet with cling film?
Lift the toilet lid and wrap the cling film around and top of the porcelain bowl. Make sure the film coverup the toilet perfectly and create an airtight space.
How to remove grease from a mug?
Take a mug and pour a half mug of dishwasher or soap water, which claim to remove dirt oil and grease substances.
Does salt unclog toilets?
Then I used Salt to unclog a badly clogged toilet. It works very well. Some professional plumbers also recommended salt.
Is a clogged toilet a misery?
A clogged toilet may be a complete misery. And, for some reason, it always appears to happen at the most inconvenient time.
Can you use a plunger to break a clog?
You have exhausted to use the plunger, even it does not break the clog – try washing up liquid. Before trying it, plunge once if possible.
How to replace a toilet seat?
Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws. 1. Put on the rubber gloves. Wipe all surfaces of the toilet with a disinfectant cleaner ...
Why close the lid on a toilet?
Close the toilet lid so you have better access to the snap caps, which are directly behind the toilet seat.
How to clean a screwdriver?
Wipe your screwdriver with disinfectant spray and dry completely before returning to a tool box or area where you store your tools.
Do you over tighten toilet seat screws?
Do not over tighten the screws when you install a new seat or reattach the old one because you risk damaging the plastic screws or damaging the toilet if you're dealing with metal screws. Jennifer Pinto has been an editor and reporter since 1999, working with newspapers in the Midwest and on the East Coast.
Can you replace toilet seats in a new home?
When you purchase a new home, certain fixtures remain when the former occupant vacates the premises. Such fixtures include an oven, cabinets and toilets. When the home was previously occupied, you may want to install new toilet seats for sanitary reasons. Swapping out used seats with new ones can be accomplished in less than 10 minutes and only requires a screwdriver. Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to fix a crack in a toilet seat?
Fill small cracks in wooden toilet seats with white or clear silicone to prevent buildup of bacteria. For large cracks, remove the seat and fit a new toilet seat in its place. Avoid using bleach to clean wooden toilet seats, as it can damage the wood as well as the metal hinges and bolts.
How to hold a nut in place?
Grip the nut fastening the bolt firmly. You should find a nut screwed onto the threaded end of each bolt. Some nuts may have a shape similar to a wingnut, allowing you to hold it in place by hand. If you have a weak grip, the nut is not wingnut-shaped, or the nut is stuck, try gripping it with a pair of pliers or vice grips.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
How to Take a Toilet Seat Off?
To start with the process of taking the toilet seat off, you’ll need to have the following tools with you.
How to Remove a Toilet Seat with Hidden Bolts?
In some toilets, the bolts and hinges are often hidden, manufactured with the thought of making NO compromise over the beauty and appearance of the toilet. But, in that case, also, you can remove a toilet seat easily.
What causes a toilet seat to loosen?
A loosened toilet seat is usually the result of loosened nuts and bolts that attach the toilet seat to the toilet bowl. This issue, however, can easily be resolved by tightening the bolts back which were loosened over time. Here’s how to do it.
Why does my toilet seat slide?
A sliding toilet seat is the result of loosened bolts that hold the toilet seat and bowl firmly together. The issue can be fixed by tightening those bolts. If the problem reoccurs after some time, that is because the holes that the bolts go into, are intentionally oversized so they don’t crack the porcelain. The solution to this is to Pack the bolt holes with special washers. This can keep them secure.
Why do toilet seats have two bolts?
These bolts are covered under plastic housing, in order to protect them from exposure and corrosion. Pry up the plastic housing using your fingers or a screwdriver to uncover the bolt.
How to take off toilet seat after removing nuts and bolts?
After removing the nuts and bolts, the toilet seat would be detached from the bowl and you can easily take off the seat by pulling it upwards .
How to open hinge cover?
Pry open the hinge cover with the appropriate tool, applying gentle pressure in order to avoid damage.
