How do you tighten a boat throttle cable?
- Loosen the throttle cable adjuster jam-nut with the wrenches. Extend or contract the adjuster until the cable moves the throttle to the idle position.
- Push the control lever forward to the "Forward idle" position.
- Pull the control lever back, through neutral, into the reverse idle position.
How to adjust the throttle cable on a boat?
How to Adjust the Throttle Cable on a Boat. 1 Step 1. Inspect the throttle cable and sheath to be sure that the and sheath are anchored securely throughout their length. Sloppiness in the cable ... 2 Step 2. 3 Step 3.
Why is my boat's throttle cable loose?
One of the problems with regulating your boat's speed might be loose, ineffective throttle control, sometimes called "slop." If you find that you've got "slop" in your throttle cable, you probably need to adjust the cable so that you have firm control over your boat's throttle setting and speed.
How do you remove a throttle cable from a lawn mower?
Re-anchor the cable and sheath in its proper location if necessary. Use a screwdriver, pliers or a wrench, depending on the type of connection, to disconnect the throttle cable from the throttle. Move the throttle into the neutral position. Pull the throttle cable to its attachment point on the throttle.
How do I troubleshoot throttle cable sloppiness?
Inspect the throttle cable and sheath to be sure that the and sheath are anchored securely throughout their length. Sloppiness in the cable may result from the sheath coming loose and flexing, thus limiting the cable travel. Re-anchor the cable and sheath in its proper location if necessary.
How do you tighten a boat throttle?
0:301:38How to: Stop your Yamaha throttle from drifting back. - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're gonna find the little flat head screw in there clockwise tightens counterclockwise loosens IMoreYou're gonna find the little flat head screw in there clockwise tightens counterclockwise loosens I recommend that you do this on the water to feel. So you can get the detent. Exactly where you want.
How do you tighten a throttle tightness?
1:503:33How To Adjust Your Motorcycle Throttle Cable | MC GarageYouTubeStart of suggested clipEnd of suggested clipFirst slide the rubber cover off the inline adjust. Then crack the lock nut free and turn theMoreFirst slide the rubber cover off the inline adjust. Then crack the lock nut free and turn the adjuster to achieve that two to three millimeters of free play yep.
How do you adjust the throttle link on a Mercury outboard?
7:028:54Mercury 60hp RPM and Throttle cable adjust - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis thing just unlatches like that and then you can pull the barrel with this off i gotta tightenMoreThis thing just unlatches like that and then you can pull the barrel with this off i gotta tighten this yet with this off and that off you could twist this around to shorten or lengthen.
How do you adjust the throttle cable on an inboard boat?
Grab the end of the lower cable where you just removed it from the stud and pull. While pulling, turn the propeller clockwise. The throttle now is in full reverse position. Move the lower cable up and down until it fits in the slot between the studs.
How do I know if my throttle cable is loose?
Signs of a bad accelerator cableThe pedal feels stiff or hard to depress.The pedal sticks and does not release normally.There is slack in the pedal's movement.There is a rough or abnormally low idle.The engine stalls.There is a delay in response when you push the pedal down.More items...•Sep 15, 2019
How much slack should a throttle cable have?
about 2 to 3 millimetersMost motorcycle manufacturers recommend about 2 to 3 millimeters of throttle free play, but over time the cables will stretch and settle into their housings and you'll end up with more slack.Feb 12, 2020
How do you adjust the shift cable on a Mercury outboard?
0:582:36Outboard Boat engine GRINDS in Reverse gear - Adjust Shift CableYouTubeStart of suggested clipEnd of suggested clipThis rear portion fully into gear. And that's where that grinding comes. So you'll pull this out andMoreThis rear portion fully into gear. And that's where that grinding comes. So you'll pull this out and adjust accordingly. After you're done with the adjustments.
How do I adjust my outboard shift cable?
0:363:22Outboard control cable adjustment for shifting gears - forward / reverseYouTubeStart of suggested clipEnd of suggested clipWhen you push the cable the throttle goes slowly in and out so for example if you adjust the cable aMoreWhen you push the cable the throttle goes slowly in and out so for example if you adjust the cable a little bit. It will make a difference in the way it works.
How do you adjust a shift cable on a boat?
2:256:12How To: Install a Sterndrive Assembly - Shift Cable Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow while taking the pin. And checking for the alignment while pulling on the top cable and pushingMoreNow while taking the pin. And checking for the alignment while pulling on the top cable and pushing slightly on the lower cable just to remove the slack.
How do you adjust the shift interrupter on a Mercruiser?
Pull on the shift cable guide to remove any slack from the cable. Remove the locknut holding the adjustment barrel in place. Remove the clevis pin with a set of pliers and disconnect the brass adjustment barrel from the post. Adjust the barrel by rotating it until you've removed the slack.
How do you adjust a carburetor on a Mercruiser?
1:122:17How to adjust mixture on mercruiser carb - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you take it out on the water. And you go clockwise and counterclockwise. And measure howMoreAnd then you take it out on the water. And you go clockwise and counterclockwise. And measure how far you turn it. And then usually take half or a little bit on the rich. Side.
How does a Mercruiser shift interrupter work?
Pre-Alpha, Alpha One and Alpha Gen II engines use a Shift Interrupter Switch. This switch allows the drive to shift back into neutral with less effort. If the shift cable is bad, it can cause the switch to "over-activate" and stall the engine when you shift.May 29, 2020