How to Tie a Stretch Magic Cord
- Step 1. Hold the ends of the Stretch Magic cord in your hands, one end per hand. Allow the ends to stick out of the top...
- Step 2. Cross the right cord over the left cord, and switch your grasp so that you are now holding the opposite ends in...
- Step 3. Twist the cord on the left side underneath the other cord, twisting it so that the end...
How do you tie beads on a stretch cord?
This stretch cord makes it so easy. Simply string your beads, knot your cord and add a drop of glue to seal the knot. Here are some knots that work great: Surgeon's Knot, Figure-Eight knot and a Carrick Bend Knot.
How to tie a stretch magic cord?
How to Tie a Stretch Magic Cord. 1 Step 1. Hold the ends of the Stretch Magic cord in your hands, one end per hand. Allow the ends to stick out of the top of your hands. 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
How do you keep beads from falling off stretch magic cord?
Because Stretch Magic cord can be slippery, a simple knot may come undone after you string the cord with beads. One solution is to tie the Stretch Magic cord using a square knot, which will enable it to remain tied, preventing the beads from falling off of the jewelry item after it has been created.
How do you stretch out a bracelet cord?
Simply pull and tug and give your cord some weathering so it flexes and stretches before you add beads. If you do not pre-stretch your cord, the beads you string may look loose and the bracelet can elongate, sag, and not drape the way you anticipated when you designed it.
How to tie a knot with a strand?
Bring both ends together, so that they are parallel to one another. Place one end perpendicular to the other one. The two ends should now be crossed, forming an "x." Holding the two ends in this position, take strand that is positioned on top of the "x" and bend it away from you. Allow the tip of this same strand to move down and toward you, back through the "o" that has now been created. Instead of pulling the ends taut (as one would normally do), repeat the over and through loop once more with the same strand. Now pull the ends tight, closing the loop and creating a knot.
How to secure a knot in a bead?
Add a drop of hypo cement glue to the knot. Pull the final bead over it. The glue will help to secure the bead over the knot and prevent your work from coming apart.
What is stretch cord used for?
This type of cord is generally used to make beaded rings, bracelets and necklaces. Although convenient, the slippery, stretchy nature of the cord can pose a problem; knots typically slide out very easily.
How to make a spool of beads?
Step 1. Choose more than double the length of stretch magic cord that you need for your project. Refrain from cutting off any of the stretch magic from the spool before you are ready to tie off your item. Add the beads. When you finish, there should be two or three inches of cord at either end with the beads in the middle.
Can you use superglue on stretchy hair?
Avoid using any kind of superglue for stretch magic projects. The active chemical in superglue will dissolve the fibers of the cord, causing the strand to suddenly snap without warning.
How to tie a knot with stretch cord?
Take one end under and through the loop. Pull tight. Repeat the knot two more times. Step 4: Add glue to the knot to make sure to stays secure. Cut excess stretch cord. Tip: Instead of using the glue bottle tip, unscrew the top, dip a headpin into the glue and use the headpin to apply glue to the knot.
How to make a stretch magic bracelet?
A new bracelet for the night takes only minutes to finish. Simply string your beads, knot your Stretch Magic and add a drop of glue to seal the knot. Here are some knots that work great: Surgeon's Knot, Figure-Eight knot and a Carrick Bend Knot.
How to use stretch magic on speeder beader?
Push Soft Flex or Stretch Magic into the pan of the Speeder Beader at a 30-45 degree angle. The pan will guide the wire into the hollow part of the Speeder Beader. Beads slip over the Speeder Beader and onto your wire or cord quickly and easily.
What do you need to make stretch magic?
A beginner needs Stretch Magic, some beads, scissors or a bead nipper, and some glue and they have everything necessary for a jewelry design. An accomplished beader will have fun creating a quick design with Stretch Magic.
How to finish off stretch magic?
A better way to finish off a design on Stretch Magic is to tie a square knot and use a dab of Special T glue for security. Special T glue is non-acidic and dries fairly clear and pliable. I've also used Special T glue for gluing glass to metal, wood to wood, and on other threads and cords.
What kind of wire do you use for stretch magic?
We do suggest using Soft Flex Beading Wire for a design that requires strength and durability, but Stretch Magic is a blast to string with!
What is stretch magic?
Stretch Magic is a strong elastic-like cord. It is constructed of a mixture of polyester and polyurethane. Unlike some elastic cords, Stretch Magic will not fray over time. Stretch Magic does not contain any latex, rayon, or elastic. At Soft Flex, we carry Stretch Magic in Clear or Black. We carry .5mm, .7mm, and 1mm sizes.
How to make a beaded bracelet with elastic cord?
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to string beads on elastic?
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord. Pre-stretch your cord by pulling on each end before stringing. This is a really important step. 02 of 04.
How to tell if a 7 inch bracelet is a 12 mm or 4 mm?
Make your bracelet the correct size. A seven-inch bracelet made with 12 mm beads is smaller than a seven-inch bracelet made with 4 mm beads. The larger beads will take away from the inside diameter of the bracelet. String them and then try it on your wrist to check for size.
How to tie a bracelet with elastic?
Cut a piece of cord the size of your bracelet, plus leave yourself at least three inches of elastic on each side to tie your knots. The cord is slippery and nothing is worse than having everything exactly like you want it, and then dropping the end during tying.
How to keep beads from falling off a spool?
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
How to tie a knot on a bracelet?
Tie your knot with some tension in the bracelet. In other words, pull the elastic so it is taut and just a little stretched when adding the second half of the knot. The extra tension from the inside helps keep the knot from untying.
How to care for elastic bracelets?
Follow these tips to make them last: Always put your elastic bracelet on the right way . This is one of the main factors in bracelets that don't last. Never put on your bracelet by stretching it over your hand. As much as possible, roll it over your hand ...
What is the best stretchy cord for jewelry?
We think Stretch Magic is one of the best stretchy cords out there for jewelry making.
What do you need to start out with stretchy cord?
All a beginner needs to start out with stretchy cord is some beads, scissors or a bead nipper, and some glue and they have everything necessary for a jewelry design. An accomplished beader will have fun creating a quick design with stretchy string.
What is elastic bracelet?
Using elastic for bracelets takes away the learning curve that advanced beading wire, cord and fiber require. Elastic is the perfect bead stringing cord for a beginner and it is wonderful for a quick jewelry design.
How to hide a knot in a bead?
One way is to use beads with larger holes. Simply move the knot so it rests inside a bead. If you are determined to make sure the knot stays, you can glue it in place - but that might cost you a bead in the long run. Another option is to use spacers with large holes. You can hide the knot inside a spacer, if your beads have smaller holes, your knot will never move. Another fun way to finish a design is to use a bail with a large hole. You can conceal the knot in the bail and then add a fabulous dangle to your jewelry design.
How thick is a 7mm cord?
.7mm is .027 inches, or between 1/64 - 1/32" thick. This diameter is great as an all purpose bead stringing cord. Most bead sizes will fit comfortably on this cord. Keep this stocked in your beading toolkit as your go-to diameter for every day beading.
How long does it take for special t glue to dry?
Special T Glue dries pliable rather than hard and crunchy. It takes around sixty seconds to dry and dries clear. Special T Glue is excellent for use with Illusion Cord, Stretch Magic, Soft Flex and Soft Touch Beading Wire. G-S Hypo Cement is a wonderful all purpose glue.
What is stretch cord?
Stretch cord is simple to use and incredibly cost effective. Stretch Magic is perfect for beaded bracelets for men, children's crafts, aromatherapy bracelets using essential oils, and so much more. You are going to be amazed by how easy it is to use this cord for beading bracelets and funky jewelry.
