Receiving Helpdesk

how do you test a gm accelerator pedal position sensor

by Holly McClure I Published 3 years ago Updated 2 years ago

This is why you need to have an OBD2 scanner tool. With this tool, you will be able to diagnose any problem with your car. Just plug it in the OBD2 port and let it scan. Then wait for the accelerator pedal position sensor code.

Part of a video titled How to Test accelerator Position Sensor - YouTube
8:41
11:19
You can also test it and by just tapping into the two signal wires using the actual the ECM.MoreYou can also test it and by just tapping into the two signal wires using the actual the ECM. Provided five volt on the ground or eight volt and a ground under than the two sensor grounds.

Full Answer

What are the symptoms of a bad Accelerator Position Sensor?

  • Hesitations during acceleration
  • Poor power
  • Difficulty and/or delay in gear shifting
  • Unusual surges while accelerating

How can I adjust my accelerator pedal?

  • First of all, open the hood of your car and locate the accelerator cable. ...
  • You can see two nuts that are holding the accelerator cable to the aluminum body’s bracket. ...
  • Now, turn the rear nut clockwise or anti-clockwise, until the middle cable deflection come to 1 to 3 mm. ...
  • Close the hood, turn on the car’s ignition and drive the car. ...

How to test tach sensor?

  • The manual will probably tell you to start by checking the fuse for the tachometer. If it’s blown, that’s likely what’s wrong with the tachometer. ...
  • If you are handy, you can use the manual to find the tachometer and check it out for yourself. Take a look at the wires on it. ...
  • Call a mechanic if you need a new tachometer or wires. ...

How to test a throttle position sensor TPS #1203?

A throttle position sensor --- TPS --- is an electrical resistor housed on the throttle body. The TPS feeds information to the engine control unit regarding the degree at which the throttle valve is open. Indications of a faulty TPS include engine stalling, lurching and sputtering; poor TPS performance starves the engine of fuel.

How do I test the accelerator pedal position sensor?

1:322:37How to test accelerator pedal position sensor, Signs of a bad ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook at the wiring diagram and identify the signal wire back-probe the signal wire using the t-pin.MoreLook at the wiring diagram and identify the signal wire back-probe the signal wire using the t-pin. Turn the ignition to kion engine off do not start the vehicle. There should be voltage.

How do you reset the accelerator pedal position sensor?

The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.

What happens when your accelerator pedal sensor goes out?

If the accelerator pedal sensor fails, the following fault symptoms may occur: Increased engine idling speed. Vehicle does not respond if the accelerator pedal is pressed. Vehicle switches to "limp-home mode"

How do I calibrate my accelerator pedal position sensor Chevy?

To recalibrate the ECM and accelerator pedal, the ignition switch must be in the ON position and then the accelerator pedal must be slowly and fully depressed from idle to full throttle. Repeat the procedure three times.

How do I know if my accelerator pedal position sensor is bad?

Signs of a bad accelerator pedal position sensorRough Idling: ... Your vehicle doesn't accelerate over a specific limit: ... The engine does not run effectively: ... Inconsistent acceleration: ... Poor automatic transmission shifting or jerks when depressing the throttle pedal: ... Check engine light: ... Locate the APP sensor:More items...•

How do I reset my GM electronic throttle control manually?

0:322:05GM Truck Electronic Throttle Body (ETB) Relearn Procedure - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext turn the ignition off for 60 seconds. Then start and idle the engine in Park for 3 minutesMoreNext turn the ignition off for 60 seconds. Then start and idle the engine in Park for 3 minutes again after the 3 minute runtime the engine should be idling normally.

Why does the accelerator position sensor have two position sensors?

Most acceleration pedal position sensors are equipped with two potentiometers to increase reliability. Each potentiometer has its own power supply from the ECU, which means the number of connections can be up to 6.

What is the difference between throttle position sensor and accelerator pedal sensor?

The accelerator pedal sensor (APS) indicates the position of the accelerator on vehicle models with electronic throttle control. The APS is basically a throttle position sensor (TPS) with a pedal attached.

Do you have to reset computer after replacing throttle position sensor?

After replacing the throttle body to your engine, if the engine light was on and has a pending code, the code will go away. If the code was a hard permanent code, then the ECM (computer) would need a hard reset.

How Do You Reset The Accelerator Pedal Position Sensor

The easiest way that you can reset this type of sensor is to remove the positive terminal of the battery and leave it like that for about 5 minutes...

How To Test GM Accelerator Pedal Position Sensor

You can test this sensor with a multimeter tool. Without this tool, you won’t be able to tell if the sensor is broken or not. Just put the tool to...

How To Tell If Accelerator Pedal Position Sensor Is Bad

You can tell if this sensor is bad only by diagnosing the problem with an OBD2 scanner to see if there are any codes concerning this component. The...

How To Replace Accelerator Pedal Position Sensor

Replacing this sensor is really easy. Just locate it. This sensor is usually the whole gas pedal. Unplug the connector and then remove the bolts th...

Can you use a generic multimeter to test an app?

You can use an analog multimeter too. Generic scan tool. You don't need to use a generic scan tool to take advantage of the test info in this tutorial, since a generic scan tool can not dynamically test the APP sensor, but it does come in handy to read any trouble codes.

Is the accelerator pedal connected to the throttle plate?

The accelerator pedal IS NOT connected to the throttle plate with an accelerator cable (like in the good ole' days). That the Accelerator Pedal Assembly is made up of ...

What does the accelerator pedal position sensor do?

Since the accelerator pedal position sensor is an electrical component monitored by the car computer, it will trigger a fault code on the computer when something goes wrong. You’ll be able to notice there’s a registered fault when the check engine light comes on.

What happens if the accelerator pedal position sensor is working inappropriately?

If the accelerator pedal position sensor is working inappropriately, it will have problems with fuel efficiency. Aside from sending the driver’s input to the throttle body, it stabilizes the throttle control.

What happens when you depress the gas pedal?

But if the accelerator pedal position sensor fails, the car’s ability to instantly accelerate or decelerate as the driver depresses the gas pedal will drastically reduce. This can cause road hazards as the driver does not have complete control of the vehicle.

What is an app sensor?

APP sensor serves as a determiner and connector between the driver and the ECU – basically the brain of a vehicle.

What does a failing APP sensor mean?

Like most electrical and mechanical vehicle components, a failing or faulty APP sensor will showcase a series of signs that will alert the driver that a problem exists in the system. “Accelerator pedal position sensor problems” are as follows;

What happens if you push a gas pedal with a bad sensor?

Depressing a gas pedal with a bad sensor will give delayed signals or burst varying signals, leading to poor gear shifting.

Why is my car not running on idle?

If your vehicle doesn’t run consistently on idle, there are chances that you have a faulty accelerator pedal position (APP) sensor. A perfect working APP sensor is necessary for good fuel delivery and consistent or smooth idling.

What Is the GM Accelerator Pedal Position Sensor?

Before diving into issues with the sensor, it is important to define what it is. This sensor relays the accelerator pedal’s position to the engine control unit (ECU).

What General Motors Car Issues Are Caused by the Faulty Sensor?

GM drivers are experiencing common symptoms when there is an issue present with the sensor. For instance, it is common for the vehicle to idle at excessively high RPM.

What Options Do Owners Have?

Many owners want to know what their options are after experiencing such a major issue. The first thing to do is bring your vehicle to an authorized GM service facility. The technicians there will review your options including potential General Motors recalls and warranty repairs.

What Is the Next Step?

If you are having issues with the pedal position sensor, it is time to take action. Like some vehicle owners, you may be dealing with frequent failures that are impacting your life. The best course of action is to contact a lawyer for assistance.

The Lemon Law Firm Serving PA, NJ, & NY

The Pennsylvania, New Jersey, and New York Lemon Law Firm of David J. Gorberg and Associates is one of the country’s largest and most successful lemon law firms. Our Lemon Law Lawyers have provided free legal help to more than 30,000 clients throughout PA, NJ, and NY, resulting in the recovery of millions of dollars.

No Cost To You. Contact Us Today

David J. Gorberg & Associates Lemon Law Firm strives to make a quick and efficient settlement for our clients, through cost free legal representation.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version1.34sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[05:42:14] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[05:42:14] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[05:42:14] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[05:42:14] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[05:42:14] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[05:42:14] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:42:14] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (20.06ms)
  • Application (1.32s)
  • 1 x Application (98.48%)
    1.32s
    1 x Booting (1.5%)
    20.06ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.3s
    • select * from `posts` where `published_at` <= '2025-06-08 05:42:14' and `slug` = 'how-do-you-test-a-gm-accelerator-pedal-position-sensor' and `posts`.`deleted_at` is null limit 1
      2.31ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-08 05:42:14
      • 1. how-do-you-test-a-gm-accelerator-pedal-position-sensor
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 190019 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      5.24msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 190019
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      830μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      340μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      280μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.29s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 8525 limit 1
      650μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 8525
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        3p44kRq0x6lFt66vzHwB63sMUuvmfahsVtjKKa5K
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-test-a-gm-accelerator-pedal-posit...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-you-test-a-gm-accelerator-pedal-position-sensor
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=c7c7c02b60954f19.1749341520.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ii9DU09saDhrWVVoR28rRXc5a05FK3c9PSIsInZhbHVlIjoiU3EwR1BLdnJORjN5N1l5TlRURVhRNW1UQ2Y3SmNmaS8vd002cnYxOWlSdG02MDdnbVRRM3FvUHBLTzdnUWFML0Z3R05LQmNlQUcrcmpBeHl3eWJRcDkxRkUyWEp6aVZzR2k0ejVoMFpuY04yaXRtMzR2V3d1K1VRK3lzNGU1ZXUiLCJtYWMiOiI1NGExNDdiMGY4ZjY5MjJiYjYwYmUzOGE0ZGM1MjE3MWVjZGQyNGY1MmRkYmQzNmViZDRjOWYyMjdjZTM3YjViIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImZGSEorK2lpdS9EbUs3OHc1NGRpQUE9PSIsInZhbHVlIjoiOENpMmR2OUlSV1Q2NTU3YlNjbWd1M0VxN1ROS1dpV1RvcGY0clh4elUzWDl5eUdvbTdoN2lMbUdIN3NyQllkZEhmRGdMdkp3NmM3Vk1Jc0U5V2NNaGRjOGgyVEdOWGFaaEtRMnhQUkJFVURCTGFuWXV2MlNkaWZUcG9vc2p1aTQiLCJtYWMiOiI0YWQ0MTQ5NjZjMzU4ZGUzZjc4ODdmYjEwZTAzYzE4MTFmMjc5NDEwNzRkOGNjOTIyZDI3ZGQxZDI1ZjAzMzZkIiwidGFnIjoiIn0%3D_pk_id.64.7c30=c7c7c02b60954f19.1749341520.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ii9DU09saDhrWVVoR28rRXc5a05FK3c9PSIsInZhbHVlIjoiU3EwR1BLdnJORjN5N1l5TlRURVhRN" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.214" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "94c42d2bad42ead8-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.214, 172.70.127.160" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-you-test-a-gm-accelerator-pedal-position-sensor" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-you-test-a-gm-accelerator-pedal-position-sensor" "REMOTE_PORT" => "36262" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.127.160" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=c7c7c02b60954f19.1749341520.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ii9DU09saDhrWVVoR28rRXc5a05FK3c9PSIsInZhbHVlIjoiU3EwR1BLdnJORjN5N1l5TlRURVhRNW1UQ2Y3SmNmaS8vd002cnYxOWlSdG02MDdnbVRRM3FvUHBLTzdnUWFML0Z3R05LQmNlQUcrcmpBeHl3eWJRcDkxRkUyWEp6aVZzR2k0ejVoMFpuY04yaXRtMzR2V3d1K1VRK3lzNGU1ZXUiLCJtYWMiOiI1NGExNDdiMGY4ZjY5MjJiYjYwYmUzOGE0ZGM1MjE3MWVjZGQyNGY1MmRkYmQzNmViZDRjOWYyMjdjZTM3YjViIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6ImZGSEorK2lpdS9EbUs3OHc1NGRpQUE9PSIsInZhbHVlIjoiOENpMmR2OUlSV1Q2NTU3YlNjbWd1M0VxN1ROS1dpV1RvcGY0clh4elUzWDl5eUdvbTdoN2lMbUdIN3NyQllkZEhmRGdMdkp3NmM3Vk1Jc0U5V2NNaGRjOGgyVEdOWGFaaEtRMnhQUkJFVURCTGFuWXV2MlNkaWZUcG9vc2p1aTQiLCJtYWMiOiI0YWQ0MTQ5NjZjMzU4ZGUzZjc4ODdmYjEwZTAzYzE4MTFmMjc5NDEwNzRkOGNjOTIyZDI3ZGQxZDI1ZjAzMzZkIiwidGFnIjoiIn0%3D_pk_id.64.7c30=c7c7c02b60954f19.1749341520.; _pk_ses.64.7c30=1; XSRF-TOKEN=eyJpdiI6Ii9DU09saDhrWVVoR28rRXc5a05FK3c9PSIsInZhbHVlIjoiU3EwR1BLdnJORjN5N1l5TlRURVhRN" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.214" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "94c42d2bad42ead8-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.214, 172.70.127.160" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749341534.0469 "REQUEST_TIME" => 1749341534 ]
        request_cookies
        0 of 0
        array:4 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "XSRF-TOKEN" => "3p44kRq0x6lFt66vzHwB63sMUuvmfahsVtjKKa5K" "askhelpdesk_session" => "pdYBoYQwGYgNWNPs6pTW29hE2Ai7AqdzkPvrv4Id" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Sun, 08 Jun 2025 00:12:14 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkN3NGhpWGxUT3RzVUd6dktXNHpYbmc9PSIsInZhbHVlIjoiQzdTaFJCTFNkR0hFbFNHdmwwSEdtQ0pFWXMzbS9wc214d1I4Z2lWMkxmVVFobExqMERjZjYzWXhLNk83QlFlZnpCRDVTajhBODZoRUJDanpnYWNVM0trUXlwU012eTBSY1JlQzNyRUUveWdQU0VERHA0VkUrNzdjbHhJdktRbW8iLCJtYWMiOiIzMmU0N2JlMGU0OGE3MGQ4YTA1MGUzYzU2MDJmZjY1NWQ4MjI3ZGE0MWVkY2FkMWI5M2E2MWIyMDZmYTQyMDU0IiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 02:12:15 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IkN3NGhpWGxUT3RzVUd6dktXNHpYbmc9PSIsInZhbHVlIjoiQzdTaFJCTFNkR0hFbFNHdmwwSEdtQ0pFWXMzbS9wc214d1I4Z2lWMkxmVVFobExqMERjZjYzWXhLNk83QlFlZnpCRDVTa" 1 => "askhelpdesk_session=eyJpdiI6IjNWVlE4WE0xMGtTM2g3WU03bEt5U1E9PSIsInZhbHVlIjoiTGo3VGU3QUQ2KzV6enlybkZFR0MvTGZOVWFnbHZlMzB1TGRTWnhoZTBYdnVsTVlwanFZditqbWRTUzNUWVJER0ZqaTVFeloyeTJ1UG5iWEFiREFobWl0R0JnRnVjcUMrelU5M0wxTDhLM3YzS3dORWVSSmE5RmdKRThBbDVTd2ciLCJtYWMiOiI4NDRiY2IwY2Q2ZDk3Yzc3NmI5NjU5Zjg0NjY5NWU1ZDhkZmZiNjQwYzk1MWU1MTE1YmRiODY3MzIzMWQ2NGRmIiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 02:12:15 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6IjNWVlE4WE0xMGtTM2g3WU03bEt5U1E9PSIsInZhbHVlIjoiTGo3VGU3QUQ2KzV6enlybkZFR0MvTGZOVWFnbHZlMzB1TGRTWnhoZTBYdnVsTVlwanFZditqbWRTUzNUWVJE" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IkN3NGhpWGxUT3RzVUd6dktXNHpYbmc9PSIsInZhbHVlIjoiQzdTaFJCTFNkR0hFbFNHdmwwSEdtQ0pFWXMzbS9wc214d1I4Z2lWMkxmVVFobExqMERjZjYzWXhLNk83QlFlZnpCRDVTajhBODZoRUJDanpnYWNVM0trUXlwU012eTBSY1JlQzNyRUUveWdQU0VERHA0VkUrNzdjbHhJdktRbW8iLCJtYWMiOiIzMmU0N2JlMGU0OGE3MGQ4YTA1MGUzYzU2MDJmZjY1NWQ4MjI3ZGE0MWVkY2FkMWI5M2E2MWIyMDZmYTQyMDU0IiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 02:12:15 GMT; path=/XSRF-TOKEN=eyJpdiI6IkN3NGhpWGxUT3RzVUd6dktXNHpYbmc9PSIsInZhbHVlIjoiQzdTaFJCTFNkR0hFbFNHdmwwSEdtQ0pFWXMzbS9wc214d1I4Z2lWMkxmVVFobExqMERjZjYzWXhLNk83QlFlZnpCRDVTa" 1 => "askhelpdesk_session=eyJpdiI6IjNWVlE4WE0xMGtTM2g3WU03bEt5U1E9PSIsInZhbHVlIjoiTGo3VGU3QUQ2KzV6enlybkZFR0MvTGZOVWFnbHZlMzB1TGRTWnhoZTBYdnVsTVlwanFZditqbWRTUzNUWVJER0ZqaTVFeloyeTJ1UG5iWEFiREFobWl0R0JnRnVjcUMrelU5M0wxTDhLM3YzS3dORWVSSmE5RmdKRThBbDVTd2ciLCJtYWMiOiI4NDRiY2IwY2Q2ZDk3Yzc3NmI5NjU5Zjg0NjY5NWU1ZDhkZmZiNjQwYzk1MWU1MTE1YmRiODY3MzIzMWQ2NGRmIiwidGFnIjoiIn0%3D; expires=Sun, 08-Jun-2025 02:12:15 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6IjNWVlE4WE0xMGtTM2g3WU03bEt5U1E9PSIsInZhbHVlIjoiTGo3VGU3QUQ2KzV6enlybkZFR0MvTGZOVWFnbHZlMzB1TGRTWnhoZTBYdnVsTVlwanFZditqbWRTUzNUWVJE" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "3p44kRq0x6lFt66vzHwB63sMUuvmfahsVtjKKa5K" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-test-a-gm-accelerator-pedal-position-sensor" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]