How to take the top off a Maytag washer?
Jul 26, 2014 · Note: first, either tape down or remove the lid for safety. In this video, I removed the glass lid first. The metal clips on the XL appear different than typ...
How do you remove the top of a whirlpool washing machine?
Jan 07, 2020 · How to Remove the Top of a Maytag Washing Machine Unplug the washing machine. Locate two screws approximately 4 inches off the floor near the two lower-front corners of the machine. Pull out on the bottom of the front panel of the machine and then pull down to unsnap the two plastic clips at the top of the front panel.
How do I remove the front panel of my Kenmore washer?
Then, raise the top up so that you can access the lock. Step 3: Remove the Screws, Clips, and Pull the Wires. There are two more screws from the lid lock. When you remove those two screws, the lid lock will release from the washer. Release the wires at the top of the washer by pushing your screwdriver into those metal retaining clips that you see.
Are Maytag washers front load or top load?
Locate the two 3/8 inch machine bolts in the upper-right-hand corners of the front of the machine if the top of the washer will not simply hinge upward. Remove these two bolts with your ratchet and set them aside. Now lift up on the front edge of the top of the machine; it is hinged in the back and should lift up and back.
How to remove top of Maytag washing machine?
Unplug the washing machine. Locate two screws approximately 4 inches off the floor near the two lower-front corners of the machine. Pull out on the bottom of the front panel of the machine and then pull down to unsnap the two plastic clips at the top of the front panel.
Where to look for door seals on a front loading machine?
Look on the inside of the upper lip where the door seals if you are working on a front-loading machine. Lift up the door of your top-loading machine. Lift up on the front edge of the top of the machine.
How far from the floor should you remove screws from a Maytag washing machine?
For starters, look at the first-lower corners of your Maytag washing machine. Approximately four inches from the floor, you should see a pair of screws.
Where are the washer bolts on a washing machine?
They are 3/8-inch big and are generally in the upper right-hand corners at the front of the washing machine. That is the case when the top of the washer won’t hinge upward. Take out the bolts using your ratchet and keep them off safely to the side.
Why is it important to fix the locking mechanism on a washing machine?
That said, when the lock isn’t working properly, the machine may also not run. So, it is important to fix the locking mechanism so that you can run your cycles as normal.
How to get to anything inside a Maytag washer?
Many parts of a Maytag washing machine are easy to work on, but in order to get to almost anything inside a Maytag washer you first need to remove the front cover and then lift up the top of the machine. Fortunately, Maytag makes this part of the job very simple. Advertisement.
How to snap clips out of a sewing machine?
If there are no screws on the front panel of your machine, then slip your flat screwdriver between the side and the front panel approximately 3 inches from the floor. Locate the clips by feel and push in slightly on them with your screwdriver until they snap out as you pull forward on the bottom edge of the front panel. ...
Can you force the front panel off of a Maytag?
Do not force the front panel off or force the lid to hinge up. If excessive force is necessary, then look for the cause. A few Maytag models have plastic snaps on the two bottom corners of the front panel instead of screws.
