step 1: Removing the Door Panel (0:37)
- Pry off the trim piece inside the door handle with a flat blade screwdriver.
- Remove the Phillips head screw inside the door handle.
- Remove the two Phillips screws at the bottom of the door panel.
- Pry out the door panel with a door panel clip tool or putty knife.
How do you take the door panel off a 2004 Dodge Durango?
1:334:44How To Remove Front Door Panel 04-09 Dodge Durango - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd once those screws are out just look on the panel. And start pulling it out see a little blueMoreAnd once those screws are out just look on the panel. And start pulling it out see a little blue clip back here pull that blue clip back off the wrong thing and pull the rod up. And remove your door.
How do you take the door panel off a 2002 Dodge Durango?
0:454:03How To Remove Door Panel 98-03 Dodge Durango - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's one right underneath the door pull there. One right near the mirror up here and then oneMoreAnd there's one right underneath the door pull there. One right near the mirror up here and then one in behind your door handle right. There. You once you remove.
How do you remove the rear door panel on a 2003 Dodge Durango?
0:433:22How To Remove Rear Door Panel 98-03 Dodge Durango - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere is for more Phillips screws. One down the bottom another at the bottom one underneath the doorMoreHere is for more Phillips screws. One down the bottom another at the bottom one underneath the door pull here and then one in behind your door handle here.
How do you take the door panel off a 2004 Dodge Dakota?
0:267:47HOW TO REMOVE DOOR PANEL 97-04 DODGE DAKOTA / DURANGOYouTubeStart of suggested clipEnd of suggested clipThe lock mechanism is just gonna drop down so don't worry about that but on the actual door handleMoreThe lock mechanism is just gonna drop down so don't worry about that but on the actual door handle there's gonna be an arm coming across that you're gonna have to disengage.
How do you remove the manual window crank on a Dodge Dakota?
How to Remove a Manual Dodge Dakota Window CrankRoll your Dakota's window all the way down. Note the exact position of the handle (for re-installation).Insert the window crank tool between the door panel and the window crank's base. Push the tool firmly to release the spring clip. ... Grasp the window crank by its base.
How do you take the door panel off a 2005 Dodge Durango?
How To Remove Rear Door Panel 2004-09 Dodge DurangoPry off the trim piece inside the door handle with a flat blade screwdriver.Remove the Phillips head screw inside the door handle.Remove the two Phillips screws at the bottom of the door panel.Pry out the door panel with a door panel clip tool or putty knife.More items...•
How do you remove the door panel on a 2007 Dodge Caliber?
1:507:02How To Remove Front Door Panel 07-12 Dodge Caliber - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn the top right corner your speaker in the bottom left corner there's two long screws. And theseMoreIn the top right corner your speaker in the bottom left corner there's two long screws. And these are both T 20s you want to go ahead and remove those.
Introduction
The door panel on a Dodge Dakota is held on with plastic friction plugs that look similar to a flathead screw with a larger than normal head. The shank is peeled back to create a friction when pushed into a receptacle. These can be reused if care is taken when removing them.
Removing the Door Panel
Using a Phillips screwdriver, remove the two screws in the armrest located in the bottom side. Remove the screw that retains a plastic piece in the front of the door handle. Remove the plastic cover that conceals the mounting point for the outside mirror on the top front of door panel.
Installing the Door Panel
Hold the door close to the door frame and attach the wiring harness connectors to the window switch and the lower marker light. Attach the door latch rods to the door handle and snap the retainers in place. Tip the bottom of the door outward and hook the top sill onto the horizontal ledge.
Anonymous
My drivers side quit working. I took the door/window assembly apart and found that a small plastic clip had worn/broken. I modified it to hold the cable securely. The problem I had was knowing how the cables routed in the door and window assembly to put it back together. I found an online picture of a new one and routed my cables per the photo.
Anonymous
The door panel is held on to the sheet metal door frame by plastic push pins that fit inside the door panel (where you can't see them). Use either a flat head screwdriver, or probably a pocket knife would work best, and slowly work your way around the door panel prying the panel and plastic push pins away from the sheet metal.
Anonymous
the window crank is held on by a c-clip. To get it off you take a medium sized flat tip screwdriver and slip it in between the back of the crank and the panel GENTLY or you will tear up the door panel.BAD. Pry the panel away from the crank and you should be able to see the c-clip, then use a small bladed screwdriver to pop off the clip.
