Use your right hand to grab the starter handle. Pull starter handle until you feel resistance, then give it a brisk pull. Always guide rope back into the housing. Repeat until you hear the blower burp or try to start.
What is the warranty on a Stihl BR 500 engine?
STIHL Incorporated Federal Emission Control Warranty Statement BR 500, BR 550, BR 600 English 33 Manufacturer's Warranty Coverage In the U.S., 1997 and later model year small off-road equipment engines are warranted for two years.
How do I start my BR 500 or BR 600 power tool?
BR 500, BR 550, BR 600 English 7 For specific starting instructions, see the appropriate section of your manual. Place the power tool on firm ground or other solid surface in an open area. Maintain good balance and secure footing.
What should I do Before I start up my Stihl?
Before you start up your STIHL, make sure you're familiar with the equipment's safety and operating information.
How do I start my Stihl gas blower?
Follow these tips on how to properly start your gas-powered STIHL blower. Always read and follow the instruction manual. Familiarize yourself with the location and function of the controls. Make sure fuel and oil caps are tight and that the blower is wiped clean.
How do you start a Stihl BR 600 blower?
0:221:58How to start cold engine of STIHL leaf blower - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the starter grip slowly. With your dominant hand until you feel it engage. And give it a briskMorePull the starter grip slowly. With your dominant hand until you feel it engage. And give it a brisk strong. Pull do not let the starter grip snap back got it slowly back into the house.
How do I start my Stihl leaf blower?
1:075:41How to Start Your STIHL Blower - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress down and grab the starter grip with your left hand for backpack blowers hold on to the blowerMorePress down and grab the starter grip with your left hand for backpack blowers hold on to the blower with your left hand and put one foot against the baseplate to prevent the blower from moving. Use.
How do you turn on a backpack leaf blower?
5:5517:29How to Use & Operate a Professional Backpack Gas Powered Leaf BlowerYouTubeStart of suggested clipEnd of suggested clipSet. The stop switch to the start position about one third open put the choke control in the choke.MoreSet. The stop switch to the start position about one third open put the choke control in the choke. Position press the air purge repeatedly. Until you see the fuel filling the bulb the bulb.
Why does my Stihl blower not start?
A leaf blower that won't start at all may require fuel. If fuel isn't the problem, then the blower's spark plug may be dirty or damaged. Remove the spark plug, and wipe it dry with a clean rag. Crank the engine several times with the starter to clear the combustion chamber, and replace the spark plug.
How do you start a Stihl BR 350?
0:211:19STIHL BR 350 Backpack Blower Toronto, Ontario - YouTubeYouTubeStart of suggested clipEnd of suggested clipNumber 1 you put her on number 2 you prime it make sure just a gas there number 3 you put the chokeMoreNumber 1 you put her on number 2 you prime it make sure just a gas there number 3 you put the choke on number 4 you pull the cord I wish you go sudden you hit the throttle. Comes off automatically.
How do I start a bg86c?
0:131:37How to Start & Use a STIHL BG 86 Leaf Blower Review ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd so to start the blower you have to prime it. Oh. Three or four times. Once. You can see thatMoreAnd so to start the blower you have to prime it. Oh. Three or four times. Once. You can see that those gas inside that plastic bubble you're good on this particular model you take the black switch.
How do you start a gas powered blower?
Mix the gas and oil in a small gas can. Gently shake the can to help incorporate the oil into the gas. Fill the leaf blower's gas tank with the gas and oil mixture. If your leaf blower has a four-cycle engine, use straight gas.
What is the choke on a leaf blower?
The choke in your leaf blower draws fuel into the carburetor. It is used to make a cold engine easier to start. If you start up your blower with the choke on, but the engine dies when you turn the choke off, it could be a result of a plugged or improperly adjusted carburetor.
How do you start a Stihl BR 420?
To start the engine, first slide the stop switch at the top to the upper "on" position. Next, turn the setting lever that is nearby and to the side. Use this lever to select any throttle opening, with the lower stop for idle speed and the upper stop for full throttle.
What would cause a leaf blower not to start?
Leftover fuel in your leaf blower is one of the primary reasons a leaf blower won't start. Gas left in the tank for 30 days or more can deteriorate, causing the engine to stall or not start properly. If left for 6 months or more, the gasoline can turn into a thick sludge.
How do you start a flooded Stihl blower?
1:535:10Quickly Unflood Any Leaf Blower - Stihl, Husqvarna, Ryobi Etc.YouTubeStart of suggested clipEnd of suggested clipAnd then what you want to do is hold the throttle wide. Open. And keep pulling until the machineMoreAnd then what you want to do is hold the throttle wide. Open. And keep pulling until the machine fires. Up now sometimes it can take just a few pulls.
Why is it so hard to start a blower?
If your blower is having a difficult time starting, then you may be dealing with a carburetor issue. The carburetor's job is to ensure the proper mix of fuel and air is directed to the blower's engine. As mentioned, the carburetor can become clogged, making it difficult for fuel and air to enter the engine.
How to use a Stihl cap?
To do this with this STIHL cap, raise the grip on the top of the cap until it is upright at a 90° angle. Insert the cap in the fuel tank opening with the raised positioning marks on the grip of the cap and on the fuel tank opening lining up. Using the grip, press the cap down firmly while turning it clockwise as far as it will go (approx. 1/4 turn).
When should you refuel a burnt out generator?
To reduce the risk of serious injury from burns, never attempt to refuel the unit until it has been completely removed from the operator.
Can improper use of instruction manuals cause serious or fatal injury?
Read and follow all safety precautions in Instruction Manual – improper use can cause serious or fatal injury.
Is a blower a high speed tool?
Because a blower is a high-speed tool, some special safety precautions must be observed as with any other power tool to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. BR 500, BR 550, BR 600. English.
What is a BR 600 blower?
BR 500, BR 550, BR 600 English 3 Use your blower only for clearing leaves, grass, paper and dust in yards, gardens, sport stadiums, parks, driveways and parking lots.
How to replace fuel cap on a BR 600?
Refueling Take care not to spill fuel while fueling, and do not overfill the tank. Closing the toolless filler cap With grip in an upright position: N Insert the cap – the raised positioning marks on the cap and the fuel tank opening must line up. N The cap should drop fully into the opening in this position. Make sure tank is not overfilled. N While pressing the cap down firmly, twist it clockwise as far as it will go (approx.1/4turn). N Fold down the grip. Checking for proper closure N The lug on the grip must engage entirely in the recess (arrow), and the grip must lie completely flush with the top of the cap. N Grip the cap and check for tightness. N If the cap can be moved, it is not properly installed. N If the cap does not tighten properly, the cap parts may be misaligned with each other, or the cap may be damaged or broken. See the "Fueling Instructions" section of the Safety Precautions for how to correct a misaligned cap and additional information. Never use your machine with a misaligned, damaged or broken cap.
What is the BR 500?
BR 500, BR 550, BR 600 English 9 otherwise disturbing asbestos, immediately contact your employer or a local OSHA representative. WARNING Dust with silica in its composition may contain crystalline silica. Silica is a basic component of sand, quartz, brick, clay, granite and numerous other minerals and rocks, including masonry and concrete products. Repeated and / or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory disease, including silicosis. In addition, the state of California and some other authorities have listed respirable crystalline silica as a substance known to cause cancer. When encountering such materials, always follow the respiratory precautions mentioned above. Operating Instructions WARNING In the event of an emergency, switch off the engine immediately – move the setting lever to 0 or STOP. WARNING Even though bystanders should be kept away from the running power tool, never work alone. Keep within calling distance of others in case help is needed. Stop the engine immediately if you are approached. WARNING To reduce the risk of personal injury, do not direct air blast towards bystanders, since the high pressure of the air flow can injure eyes and can blow small objects at great speed. WARNING The blower fan between the air intake and output openings rotates whenever the engine is running. Never insert any foreign object into the air intake of the machine or into the nozzle of the blower. It will damage the fan wheel and may cause serious injury to the operator or bystanders as a result of the object or broken parts being thrown out at high speed. Do not place the blower on the ground when operating at high speed, because small objects such as sand, grass, dust, etc. may be pulled into the air intake and damage the fan wheel. It is best to turn the machine off when putting it on the ground. WARNING Never modify your muffler. Any modification could cause an increase in heat radiation, sparks or sound level, thereby increasing the risk of fire, burn injury or hearing loss. You may also permanently damage the engine. Have your muffler serviced and repaired by your STIHL servicing dealer only. WARNING The muffler and other parts of the engine (e.g. fins of the cylinder, spark plug) become hot during operation and remain hot for a while after stopping the engine. To reduce risk of burns, do not touch the muffler and other parts while they are hot. Keep the area around the muffler clean. Remove excess lubricant and all debris such as pine needles, branches or leaves. Let the engine cool down sitting on concrete, metal, bare ground or solid wood away from any combustible substances. WARNING An improperly mounted or damaged cylinder housing or a damaged/deformed muffler shell may interfere with the cooling process of the muffler. To reduce the risk of fire or burn injury, do not continue work with a damaged or improperly mounted cylinder housing or a damaged/deformed muffler shell. Your muffler is furnished with a spark arresting screen designed to reduce the risk of fire from the emission of hot particles. Never operate your unit with a missing or damaged spark arresting screen. If your gas/oil mix ratio is correct (i.e., not too rich), this screen will normally stay clean as a result of the heat from the muffler and need no service or maintenance. If you experience loss of performance and you suspect a clogged screen, have your muffler maintained by a STIHL servicing dealer. Some state or federal laws or regulations may require a properly maintained spark arrestor for certain
What is the safest way to use a blower?
Safe use of a blower involves 1. the operator 2. the power tool 3. the use of the power tool. THE OPERATOR Physical Condition You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol, etc.) which might impair vision, dexterity or judgment.
