Receiving Helpdesk

how do you start a honda gcv 160 lawn mower

by Cody O'Hara Published 2 years ago Updated 1 year ago

How to Start a GCV160 Honda Mower

  1. Turn the fuel valve on the side of the engine 90 degrees counterclockwise to the "On" position.
  2. Move the choke throttle lever, located on the left of the fuel valve, to the "Choke" position if starting from cold.
  3. Shift the flywheel brake control above the throttle/choke lever to the "Run" position.
  4. Pull firmly on the starter cord, letting the rope slowly feed back into the machine. The engine starts after a few pulls.
  5. Move the throttle/choke lever to the "Fast" or "Slow" position a few seconds after starting the engine.

  1. Turn the fuel valve on the side of the engine 90 degrees counterclockwise to the "On" position.
  2. Shift the flywheel brake control above the throttle/choke lever to the "Run" position.
  3. Pull firmly on the starter cord, letting the rope slowly feed back into the machine.

How do you start a gcv160 lawn mower?

Starting your GCV160 is straightforward and involves opening the fuel valve, adjusting the choke, setting the flywheel and pulling the starter cord. You can easily memorize the starting process so you don't have to follow instructions each time you mow the lawn.

How to start a Honda lawn mower?

How To Start A Honda Lawn Mower 1 Check oil level. 2 Check gas level. 3 Turn gas on. 4 Apply bail lever (if fitted). 5 Apply choke (if fitted). 6 Pull start mower. Two common features of your Honda mower will dictate how you start it, Roto-Stop and choke type. All... More ...

What kind of fuel does a Honda GCV 160 take?

Have a new Honda GCV 160? This guide will walk you through starting and stopping this engine, as well as address common issues, no matter what it may be powering. Fuel – Make sure there is fresh gasoline in the tank. This engine can use fuel blended with up to 10% ethanol (E10) or 5% methanol.

How do you set the choke on a Honda lawn mower?

4 Set Throttle – Simply set the Throttle to fast (hare symbol) for the auto choke. For mowers with manual choke, set it to full choke to start. Some Honda mowers won’t have any throttle levers, the engine has a factory set speed. If you are unfamiliar with choke, how and when to use it, you are not on your own (see below).

Why does my Honda GCV160 won't start?

If it still won't start, make sure the spark plug is clean and in good working order and there is fresh fuel in the fuel tank. If that doesn't fix it, have the engine looked at by an authorized dealer. If the engine is low on power, check the air filter for dirt and damage, and make sure the fuel is fresh.

How do you start a Honda Easy Start lawn mower?

1:072:53How to start the lawnmower - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn the owner's manual it says to pull on the starter rope briskly. So I'm going to bristly pull onMoreIn the owner's manual it says to pull on the starter rope briskly. So I'm going to bristly pull on the starter rule and as you can see the motor started to power.

Where is the choke on a Honda GCV160?

0:042:10Honda GCV160 Choke System - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarted what you want to do when it's cold. Is you want to flip this lever all the way up into chokeMoreStarted what you want to do when it's cold. Is you want to flip this lever all the way up into choke. Position. Now then you come over here. As soon as you grab the bale and pull it.

Where is the choke on a Honda push mower?

1:317:22Make Your Lawnmower Start On The First Pull Again - Honda Auto-choke ...YouTubeStart of suggested clipEnd of suggested clipIt's the flap down inside the carb there if the little cartridge is working properly that choke flapMoreIt's the flap down inside the carb there if the little cartridge is working properly that choke flap should be totally shut when the engine is cold.

How do you start a Honda riding lawn mower?

After the throttle lever is in the choke position, the next step is to hold and eventually pull the starter rope. It is necessary for you sturdy pull the cord two to three times. This will cause the motor lawnmower to start. As the throttle lever is in a choke position, this will cause the motor to run roughly.

How do you start a Honda lawn mower that has been sitting?

0:385:22How To Start A Mower That's Been Sitting - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to spray some carburetor cleaner up there and then we're going to reseat that cup 99MoreAnd we're going to spray some carburetor cleaner up there and then we're going to reseat that cup 99% of the time that's all you need to do to fix.

How do you start a automatic choke on a Honda lawn mower?

Simply set the Throttle to fast (hare symbol) for the auto choke. For mowers with manual choke, set it to full choke to start. Some Honda mowers won't have any throttle levers, the engine has a factory set speed.

How do I start my lawn mower with a choke?

Open the choke all the way if you notice that it has been closed. If it has been open, the carburetor may be flooded. Close the choke, and pull the starting cord a few times. When you get the engine to sputter, open the choke, and try starting the mower.

How do you start a Honda GCV 170?

3:0510:42Honda GCV170 | Walk Behind Self Propelled Lawn Mower | Auto ChokeYouTubeStart of suggested clipEnd of suggested clipStart so but first you want to do is hold on to that. Handlebar. Right and you just pull shaking aMoreStart so but first you want to do is hold on to that. Handlebar. Right and you just pull shaking a little bit because my my phone was shaking.

How do you know if choke is open or closed?

Turn on the ignition of your car. Once the engine is warm, you can remove the air filter and check whether the choke is open or closed. At this point, the choke should be open to allow the engine to breathe fully.

Why is my Honda mower hard starting?

Common solutions for: Honda Lawn mower is hard to start. The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the hedge trimmer for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance.

What is the choke on symbol?

The choke on symbol for most small engines looks like a horizontal ( — ) or diagonal ( / ) line. It also can simply say 'Choke', 'Full Choke', or 'Start'. The off symbol for most small engine chokes is represented by a vertical line ( | ) or the word 'Run'.

How do you start a Honda hrr216?

3:095:50Honda HRR216VYA 160cc 21 in. Gas Lawn Mower Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the throttle is in the fast position press and hold the yellow roto stop button thenMoreMake sure the throttle is in the fast position press and hold the yellow roto stop button then quickly pull the blade control lever to the handlebar.

What is the choke on symbol?

The choke on symbol for most small engines looks like a horizontal ( — ) or diagonal ( / ) line. It also can simply say 'Choke', 'Full Choke', or 'Start'. The off symbol for most small engine chokes is represented by a vertical line ( | ) or the word 'Run'.

Why isn't my mower starting?

Your Mower Won't Start: If you have last season's gas in your mower, drain your fuel tank and fill with fresh gas. Other possible causes include: Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace.

How do you start a lawn mower that won't start?

If you run into problems getting your lawnmower ready for spring, try the following:Use fresh gas. Old gasoline can cause starting difficulties. ... Check the spark plug. ... Use the choke. ... Prime the mower. ... Check the air filter. ... Check the cables. ... Check for water in the fuel tank.Clear the starter cord of blockages.More items...

Step 1

Turn the fuel valve on the side of the engine 90 degrees counterclockwise to the "On" position.

Step 2

Move the choke throttle lever, located on the left of the fuel valve, to the "Choke" position if starting from cold. Use "Fast" or "Slow" if the engine is already warm.

Step 3

Shift the flywheel brake control above the throttle/choke lever to the "Run" position.

Step 4

Pull firmly on the starter cord, letting the rope slowly feed back into the machine. The engine starts after a few pulls.

Step 5

Move the throttle/choke lever to the "Fast" or "Slow" position a few seconds after starting the engine.

When should the fuel valve be opened?

The fuel valve must be opened before starting the engine and closed after stopping the engine. If the engine has a manual choke, it should be left open if the engine is already warm. To use a recoil-starter, pull the starter grip until resistance is felt, then give it a hard pull to turn over the engine.

What to do if your car is low on power?

If that doesn’t fix it, have the engine looked at by an authorized dealer. If the engine is low on power, check the air filter for dirt and damage, and make sure the fuel is fresh. If it still bogs down, have the engine looked at by an authorized dealer.

How do I start a Honda lawn mower?

Most will follow this basic procedure: Check oil level. Check gas level. Turn gas on. Apply bail lever (if fitted) Apply choke (if fitted) Pull start mower. Two common features of your Honda mower will dictate how you start it, Roto-Stop and choke type.

How to start a Honda mower that won't start?

Now two good pulls and it should burst into life. For mowers with manual choke, as soon as the engine starts, move the throttle lever to the fast setting (hare) If your Honda didn't start, check out Honda mower won't start.

How to start a Honda without roto stop?

Starting A Honda Without Roto-Stop. Simply set the throttle to fast (hare symbol) for auto choke. For mowers with manual choke, set it to full choke to start. Some Honda mowers won't have any throttle levers, the engine has a factory set speed.

What does it mean when a Honda mower has a choke?

If your mower has Auto choke, it will be badged auto choke on the engine cover or the air filter cover. If your mower is manual choke, it will have the choke symbol on the throttle lever.

What is a pull start mower?

Pull start mower. Two common features of your Honda mower will dictate how you start it, Roto-Stop and choke type. All modern Honda mowers are auto choke, that means that you don't need to fiddle around with any levers to start the engine, but if your mower is a few years old, it may have a manual choke lever.

How to start a cold engine with manual choke lever?

Your manual choke lever may look different, but that's not important. Look for the choke symbol on your throttle control panel. Set it to full choke, that's all the way up to start a cold engine. Once the engine is running, move the throttle lever off the choke down to the fast setting (hare symbol).

Why does my mower flood when I start it?

Turning your mower over with the carburetor side down can often cause the engine to flood gas onto the air filter, this can then cause the engine to flood when you try to start the engine. Removing and replacing the air filter will fix this problem.

How long does it take for gasoline to deteriorate on a Honda?

When properly maintained, your Honda powered product should provide years of trouble-free operation. This includes the fuel system.However, gasoline can quickly deteriorate (in as little as 30 days) causing starting or running problems and, in some cases, damage to the fuelsystem. Most fuel-related problems can be avoided by following the precautions listed below. Fuel system damage and engine performanceproblems resulting from deteriorated gasoline are not covered by the DISTRIBUTOR’S LIMITED WARRANTY.

How long should I let my car cool before cleaning?

If the engine has been running, allow it to cool for at least half an hour before cleaning. Clean all exterior surfaces, touch up any damaged paint, and coat other areas that may rust with a light film of oil.

How long is Honda warranty?

Honda power equipment engines sold in the United States and Canada are covered by this warranty for a period of two years from the date of delivery to the original retail purchaser or the length of the Honda Distributor’s Limited Warranty, whichever is longer. This warranty is transferable to each subsequent purchaser for the duration of the warranty period.

Is there a warranty on Honda?

This DISTRIBUTOR'S WARRANTY is the only and the entire written warranty given by Honda for Honda General Purpose Engines. No dealer or his agent or employee is authorized to extend or enlarge on these warranties on behalf of Honda by any written or verbal statement or advertisement.

Does Honda warranty cover power equipment?

As the power equipment engine owner, you are responsible for completing all required maintenance listed in your owner's manual. Honda recommends that you retain all receipts covering maintenance on your power equipment engine, but Honda cannot deny warranty coverage solely for the lack of receipts or for your failure to ensure that all scheduled maintenance has been completed.

Does Honda have emissions control?

These original-design replacement parts are manufactured to the same standards as the original parts, so you can be confident of their performance. Honda cannot deny coverage under the emission warranty solely for the use of non-Honda replacement parts or service performed at a location other than an authorized Honda dealership; you may use comparable EPA certified parts, and have service performed at non-Honda locations. However, the use of replacement parts that are not of the original design and quality may impair the effectiveness of your emissions control system.

Can I take my Honda power equipment to a Honda dealer?

You must, at your own expense, take your Honda Power Equipment engine or the product on which it is installed, along with your sales registration card or other proof of original purchase date, to any Honda Power Equipment dealer who is authorized by Honda to sell and service that Honda product during his normal business hours. Claims for repair or adjustment found to be caused solely by defects in material or workmanship will not be denied because the engine was not properly maintained and used.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9