How do you start a craftsman platinum lawn mower?
- Check the oil level on your Craftsman push lawn mower.
- Attach the spark plug wire to the lawn mower's spark plug if you have not done so in the past.
- Push the primer button three times or five times in weather below 55 degrees Fahrenheit.
- Grasp the hold control handle and upper handle firmly in one hand.
How do you start a craftsman push mower?
The push mower, most commonly used for small yards and the riding mower, which is often used by consumers with large plots of land. Craftsman lawn mowers start in one of two ways and determining the correct starting option is very simple. Check the oil level on your Craftsman push lawn mower.
How to fill a craftsman lawn mower with gas?
If you are using a Craftsman 6.75 lawnmower, this step will be a bit different. These kinds of lawn mowers have a gas tank, and you will need to fill it with gas. For riding lawn mowers, you will find the oil cap under the hood. You will need to attach the spark plug with the wire correctly. Each is situated at the front of the engine.
What should I avoid with my Craftsman platinum lawnmower engine?
Avoid the use of alcohol based fuels such as ethanol or methanol in Craftsman Platinum lawnmower engines. These fuels can damage fuel system components such as the carburetor and rubber fuel hoses. Avoid overpriming the lawnmower engine in warm weather because this can flood the engine, making it more difficult to start the mower.
How does a platinum lawn mower start?
Platinum engines are equipped with or without engine primer bulbs that make starting the lawn mower engine easier in cold weather. The rubber primer bulb pushes fuel through the carburetor into the combustion chamber to help the engine start easier.
How do you start a craftsman platinum self propelled lawn mower?
0:062:55Craftsman Push Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can charge the battery and it'll start like 20 times before it needs recharging have to placeMoreYou can charge the battery and it'll start like 20 times before it needs recharging have to place for the bagger down here you just lift it up.
How do you start a Craftsman lawn mower?
Hold onto the recoil starter handle located on the right hand side of the mower and slowly pull the rope. Allow the rope to rewind gently. Pull the recoil rope rapidly using a complete, full-arm motion before letting the rope return gently. Repeat pulling the rope rapidly and returning until the lawn mower starts.
How do you prime a craftsman platinum lawn mower?
How to Prime a Craftsman Push MowerLook for a flexible push-button style bulb on the carburetor of your Craftsman mower. ... Park the mower on flat, level ground.Press the primer bulb fully 3 times. ... Crank the engine.More items...
How do you start a craftsman key start lawn mower?
1:153:01Craftsman Briggs & Stratton Lawnmower With Key Start - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd they just don't last very long but anyways i'll show you how it works it's quite nice it worksMoreAnd they just don't last very long but anyways i'll show you how it works it's quite nice it works very well you pull down the bail break and then you just turn this key here. And it should. Start.
Why does my Craftsman mower won't start?
A Craftsman lawn mower won't start when the engine is not getting air, fuel or spark due to a plugged air filter, bad fuel, faulty switches, bad battery, bad spark plug, fuel blockages or dirty carburetor. Keep reading for my complete list of items that can prevent your Craftsman lawn mower from starting.
How do you turn on a lawn mower?
0:572:39How To Start A Lawn Mower-Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next thing that you are going to do is pull down this lever right here and this will allow youMoreThe next thing that you are going to do is pull down this lever right here and this will allow you to actually start the lawnmower.
Where is the primer button for Craftsman lawnmower?
A lawnmower primer bulb is located on the side of the carburetor, close to or on the air filter. The air filter is positioned on the opposite side of the engine muffler.
How do you start a Craftsman lawn mower without a primer bulb?
In order to start your mower without a primer, squirt starter fluid directly into the carburetor via the air intake. Simply remove the air filter cover, take out the air filter, and squirt starting fluid into the air intake nozzle. Quickly replace the air filter, and start your mower. It should start straight away.
Do all lawn mowers have a primer button?
Most small engines use a primer bulb. A carburetor on a lawnmower is very small compared to the larger ones commonly found on older automobiles. Because of this, carburetors used on small engines usually have a rubber or plastic priming bulb that forces fresh gas into the carburetor bowl.
How do you start a lawn mower with a key?
0:472:52Now you can start your lawnmower with the turn of a key! - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarting system with ready start our simplest starting system for walk behind lawn mowers just turnMoreStarting system with ready start our simplest starting system for walk behind lawn mowers just turn the key and mow. When we demonstrated this feature to homeowners.
How do you start a push button lawn mower?
2:193:14Push Button Start and Run Switch Install on riding Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipMower now what i'm going to do is wire up an on off switch from b to l. We'll flip that switch pressMoreMower now what i'm going to do is wire up an on off switch from b to l. We'll flip that switch press the starter button won't need a key anymore. That simulates run with the.
How does a key start lawn mower work?
The electric starter is driven by a small electric motor actuated by a solenoid that cranks the flywheel, which then begins the process of ignition. The primary advantage to an electric start lawn mower is that the mower can be turned on with the flip of a switch.
What is a platinum lawn mower?
Platinum engines are equipped with or without engine primer bulbs that make starting the lawn mower engine easier in cold weather. The rubber primer bulb pushes fuel through the carburetor into the combustion chamber to help the engine start easier. Platinum lawnmower models without a primer are more difficult -- but not impossible -- to start.
What is a Craftsman Platinum?
"Platinum" refers to a series of Briggs & Stratton engines that are manufactured for Craftsman lawn mowers. Platinum engines are equipped with or without engine primer bulbs that make starting the lawn mower engine easier in cold weather.
Can you use alcohol in a Craftsman lawn mower?
Avoid the use of alcohol based fuels such as ethanol or methanol in Craftsman Platinum lawnmower engines. These fuels can damage fuel system components such as the carburetor and rubber fuel hoses. Avoid overpriming the lawnmower engine in warm weather because this can flood the engine, making it more difficult to start the mower.
How To Start A Craftsman Push Mower In 5 Easy Steps
Craftsman manufactures various types of push mowers, including gas, electric, and cordless. Most electric and cordless mowers have few starting problems. However, gas mowers may be challenging to start after a period of inactivity.
Things To Do Before Starting Your Lawn Mower
Starting the lawn mower isn’t complicated if you follow the steps above, but you should always start with a few basic checks. These are necessary to ensure the proper functioning of your gardening equipment and prevent future problems.
3 Common Problems And How To Fix Them
You’ve tried checking everything above, but your mower still doesn’t start, or it has problems? Check out the three common problems below and find out how to fix them.
Related Questions
Lawn mower oil remains stable for a long period, but it could start losing its properties after about two years. You can winterize a lawn mower without draining the oil if you’re using it a lot in the warm season, but you should replace it after a long period of inactivity.
Summary
Starting a gas mower can be troublesome sometimes. We hope that users now know how to start their Craftsman lawn mower and troubleshoot the most common problems. If in doubt, asking a professional mechanic for help could be the best solution.
Where is the primer button on a lawn mower?
In case of push mowers, you will find the primer button at the left-hand side of the lawn mower engine. The primer button is usually red or black. You will need to press it at least three times. The reason behind this is to push the gasoline. Now, you will need to take the control handle and hold it with one hand.
Why won't my lawn mower start?
For example, the spark plug might be defective, the carburetor of the lawnmower might be clogged, the engine oil or the fuel might be bad or old, or the start switch might be faulty.
Why is my lawn mower's carburetor clogged?
The carburetor of your lawn mower will be clogged as a result of keeping fuel for a long time. The fuel will turn into a sticky and thick component, and it will clog the carburetor. An easy solution is to clean the carburetor. If it doesn’t work, you will have to change the whole carburetor.
How to tell if a lawn mower has enough fuel?
At first, you will need to see if the lawn mower has enough fuel to start. You will see the same type of oil tanks in different lawnmowers. For example, the push mower and the riding mower both will have an oil tank which is situated at the top side of the engine. Usually, the containers are black.
Where to find air filter on lawn mower?
You will find on the left side of the engine. See if the air filter is clean or not. The dirt in the air-filter will prevent air from going in, and the lawn mower wouldn’t start. It is crucial to have a clean air filter. Also, cleaning the air-filters can be a hassle as well as time-consuming.
Do Craftsman lawn mowers have gas?
If you are using a Craftsman 6.75 lawnmower, this step will be a bit different. These kinds of lawn mowers have a gas tank, and you will need to fill it with gas. For riding lawn mowers, you will find the oil cap under the hood.
Can you start a lawn mower with old gasoline?
It is one of the most common problems. Old and bad gasoline will never let your lawn mower start. A tip is not to keep gas or oil in the tank for long.
Inspect the Engine Oil Quality and Level
You need to make sure your lawnmower has sufficient fuel before trying to start it. You might find similar kinds of reservoirs on different craftsman lawn mower models. For instance, both the riding and push mower have their oil tank located around the engine’s topside, and the container is usually black.
Ensure the Air Filter is Working Properly
Remove the air filter cover with a screwdriver. Usually, you can find it on the engine’s left side. Check whether the air filter has dust or not. Dirt on the filter prevents the entry of air, and the machine will only crank. It’s therefore vital to ensure the air filter is clean even before trying to start the mower.
Engage the Primer Switch Severally and Rapidly Pull the Rope in Case of a Push Mower
You will see a primer button located on the left side of the mower engine for push mowers. In most cases, this switch is black or red. You have to engage this switch three times at least. Typically, this helps pump the fuel. Using one hand, you are required to pick up the adjusting lever.
In Case of a Riding Machine, Insert the Ignition Key and Engage the Brake
For riding machines, insert the ignition key into its hole. It requires you to engage the machine’s parking brake for a short time before starting it. While holding the brake, turn on the braking mechanism. Remember to disengage the brake when you are ready to start mowing with the machine.
Conclusion
In conclusion, starting a Craftsman lawn mower is a simple procedure, as you only need to follow the above process. Keep in mind that skipping one of the above steps can make the craftsman mower fail to start. In case you want to use the machine in winter, you may need to repeat the whole process 2-3 times.
What do you need to start a craftsman mower?
Before starting your craftsman mower, you have to check some essential components first. These include the acid level in the batter, oil level, and gas. Accustom yourself to the various controls you need to start using your mower. The following steps will describe the method of using every lever and knob.
Why won't my Craftsman mower start?
The most common cause of a Craftsman mower not starting is the bad fuel. If it has not been used for some time, the carburetor’s bowl is likely to be filled with old or bad fuel. The crude gas can then clog the carburetor’s lines and core. If the carburetor is clogged, you will have to clean it. You can use a carb cleaner like WD-40. This cleaner also helps prevent rust & make maintaining it over extended periods. Other common causes include defective spark plugs and issues with the ignition coil.
How to drive a lawn mower in reverse?
First, come to a complete stop and disengage the blades by pulling the PTO back. Release the brake pedal. Then, turn the key and move the PTO/blade lever to the on position to engage the blades.
How long do Craftsman lawn mowers last?
They have a shelf-life of 15-20 years. A more common rating is the number of hours. These mowers are expected to last about 1000-1200 hours, given that they are properly taken care of.
Where is the choke lever on a lawn mower?
It is the topmost level on the meter. The choke lever lies on the left of the steering wheel. Turning it on will increase the fuel supply to provide a rich mixture to the engine. Now you can start your mower with ease by turning the ignition key clockwise.
Which is the best riding lawn mower?
For maintaining bigger lawns, riding lawn mowers are quite helpful. Among them, the Craftsman brand of riding lawnmowers is seen as one of the best. They are fuel-efficient and have a powerful blading system. They offer a fully automatic drive mechanism and are quite comfortable to use for prolonged hours.
Can you use a trickle charger on a lawn mower?
Batteries that are not used for some time get discharged. This is more common in places with a colder climate. If you are storing the lawnmower for an extended time, it is a good idea to remove them. You can also use a trickle charger with a maintainer mode to keep it in good shape.
What do you need for a lawn mower?
Things You'll Need. Motor oil. Ignition key. Craftsman, which introduced the first lawn mower in 1934, manufactures two types of lawn mowers for use by consumers. The push mower, most commonly used for small yards and the riding mower, which is often used by consumers with large plots of land.
Where is the blade engage lever on a riding lawn mower?
Locate the blade engage lever on the right fender of the riding lawn mower next to the riding seat. Check that the lever is in the "off" position, if not move the lever until the blade is disengaged. The off position is when the lever is as far away from the front of the riding lawn mower as possible. Advertisement.
How to use a recoil rope on a lawn mower?
Grasp the hold control handle and upper handle firmly in one hand. Hold onto the recoil starter handle located on the right hand side of the mower and slowly pull the rope. Allow the rope to rewind gently. Pull the recoil rope rapidly using a complete, full-arm motion before letting the rope return gently.
