How do you spray Nason base coat?
- Mix 2 tbsp.
- Run 400-grit sandpaper over the surface of your car.
- Cover any areas you don't want to paint with masking tape, such as windshields, windows and rubber strips.
- Apply one coat of Nason primer.
- Mix your base coat with paint activator and paint thinner or reducer before proceeding.
How do you mix Nason paint for spray painting?
Nason Finishes recommends using a ratio of 8:1/2:4, or 8 parts of Nason base coat to 1/2-part base coat activator to 4 parts base coat reducer. Failure to mix the paint properly can clog your spray gun. If you're using aerosol cans, the paint should be properly mixed in the can for you, so skip this step.
How do you mix Nason base coat properly?
how do you mix nason base coat properly? it state to mix 8:1/2:4, none of the mixing cups i've got have an 1/2 mark on it. the only way i can think to mix it properly is to double the amount of color and reducer in oz's to get a whole oz in activator, which ends up being way to much paint for one coat.
How do you use a Nason sprayer?
Pour your Nason base coat into a paint sprayer. Nason Finishes recommends setting both gravity-feed and siphon-style spray guns to 1.4 mm to 1.6 mm to apply the paint. Spray the paint onto your car. Keep your hand even and move the spray gun back and forth. If the paint drips, you're applying too much paint. Work in an even layer.
How long does it take for Nason paint to dry?
If the paint drips, you're applying too much paint. Work in an even layer. Allow the base coat to dry the "flash time," then apply a second coat in the same manner. Let the base coat dry for at least 15 minutes before applying a Nason clear coat.
What is the mixing ratio for Nason base coat?
8:½:4Combine the components by volume (8:½:4). Mix thoroughly prior to activation. Before sanding, remove all traces of oil, wax and grease with Nason® 441-05™ Silicone and Wax Remover or Nason® 481-75™ Surface Cleaner using clean rags.
What is the flash time for Nason base coat?
Flash off for 15 - 20 minutes before applying clear.
How do you spray base coat?
0:514:25How To Spray Basecoat on Your Car - Kevin Tetz Paints his Camaro with ...YouTubeStart of suggested clipEnd of suggested clipAnd about four inches from the surface. You will definitely get a feel for it as you read yourMoreAnd about four inches from the surface. You will definitely get a feel for it as you read your pattern while you're spraying. To keep the hose out of the car. I usually have it over my shoulder.
Do you need activator with Nason ful base?
Ful-Base B/C Basecoat Color should be activated with 483-30™M Activator for optimal performance. Ful-BaseⓇ B/C Basecoat Color must be clear coated.
Is Nason ful base a urethane?
Nason Ful-Thane IS Quality Single-Stage Topcoat A urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.
Is Nason base coat urethane?
Dupont / Nason Urethane Base Coat Olympic White 1 Gallon Of Basecoat 2 quarts urethane reducer... This product was added to our catalog on Saturday 14 December, 2013.
What pressure do you spray base coat?
When spraying base coat clear coat systems, you want to spray at 26-29 PSI. You measure this PSI by pulling the trigger and letting air flow through the tip of your gun with your dial or digital readout saying 26-29 PSI.
Should you sand between basecoat and clearcoat?
If you have to sand the basecoat at any step it must be recoated with another layer of color before moving on to the clearcoat step. Sanding between layers of clearcoat is also not recommended. Wet sanding and polishing the final layer will yield a better result than doing it between each coat.
Do you flat base coat?
Yes you will need to flat the basecoat and apply more as there will be no adhesion for the clear to stick to. As the amount of time it's been left the base will be fully cured which if clear was applied it would result in it flaking off.
How do you spray Nason paint?
0:2810:19How to Spray Nason Base Coat / Clear Coat (BC/CC) Automotive PaintYouTubeStart of suggested clipEnd of suggested clipNext we'll use some wax and grease remover to remove any dust or grime and we'll i have some in aMoreNext we'll use some wax and grease remover to remove any dust or grime and we'll i have some in a bottle. And we'll just lightly dampen the cloth.
What type of paint is Nason ful base?
A solventborne basecoat designed for overall repairs to OEM basecoat/clearcoat finishes.
How do you spray base coat clear?
2:577:02How to Spray Paint a Car Basecoat Clear Coat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst coat you just need to close off over there the whole base coat coat. So basically as long asMoreFirst coat you just need to close off over there the whole base coat coat. So basically as long as you can't see anything through the base coat any base coats with the clear. That's what you want.