- Prepare your laundry by sorting same colored clothes together.
- Open up the Frigidaire Affinity washing machine and place the clothes inside.
- Open the dispenser on the upper left-hand side of the machine and add the laundry products.
- Change the cycle selector knob on the left to pick the wash cycle.
How to start a Frigidaire affinity washing machine?
- Prepare your laundry by sorting same colored clothes together.
- Open up the Frigidaire Affinity washing machine and place the clothes inside.
- Open the dispenser on the upper left-hand side of the machine and add the laundry products.
- Change the cycle selector knob on the left to pick the wash cycle.
How to troubleshoot a Frigidaire affinity washer?
How to Troubleshoot a Frigidaire Affinity Washer
- Noises. Stop the washing machine if rattling or clanking sounds occur. ...
- Does Not Start. Plug the power cord in and check household fuses or breakers. ...
- Won’t Spin or Load Too Wet After Spinning. Add more clothing to small loads. ...
- Does Not Fill With Water. Check the water pressure at a nearby faucet. ...
What is Frigidaire affinity?
The Frigidaire Affinity FAFW3801LW has been discontinued. With an MSRP of just $749, the Frigidaire Affinity FAFW3801LW is one of the least expensive front-loading washers on the market. In addition to its low purchase price and cost of ownership, this washer’s greatest asset is its simplicity. For the most part, it’s a matter of turning the dial to the desired cycle and pushing start.
What are some common Frigidaire washer problems?
Washing Machine is Shaking and Moving
- Not Level. If the floor isn't level your clothes washer will definitely jump around. ...
- Washer Feet Improperly Positioned. Washing machines are designed to be adjusted to the floor surface so that they sit level and do not rock.
- Load is Unbalanced. If your laundry is off balance you'll need to open the washer and adjust the load. ...
How do you put a washing machine in clean mode?
To run a Self Clean cycle, make sure the washer is empty, press Self Clean, and then press Start. You don't need to add any cleaner when running self clean. However, we do recommend using bleach if you already have an existing mold smell (see our guide for details).
How do you run a clean cycle on a front load washer?
Fill the washer a second time with hot water, also on the “clean cycle” setting (or the hottest, largest setting). Add 2 cups of bleach to the detergent tray, to remove stains and germs that may be lurking in the wash tub. Again, allow the machine to run through a complete wash and rinse cycle.Aug 14, 2017
How do you clean a Frigidaire washing machine?
0:051:33How to Properly Clean & Care for Your Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a damp cloth or mild soap and water to clean the top and sides of the washer. Avoid hard grittyMoreUse a damp cloth or mild soap and water to clean the top and sides of the washer. Avoid hard gritty or abrasive cleanser avoid moisture buildup by drying the washer top the lid opening.
How do you clean Affinity front load washer?
0:336:38Tips on cleaning a Frigidaire Affinity Washer & Dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo dog hairs into everything this rim right here you've got to try to keep it bleach down with theMoreSo dog hairs into everything this rim right here you've got to try to keep it bleach down with the bleach spray. I use that when I spray it around. And then I wipe it out with a paper towel.
How much vinegar do I use to clean my washing machine?
Measure out two cups of distilled white vinegar and pour it directly into your washing machine's detergent dispenser. Set the washer to run on its longest cycle with the hottest water. Sprinkle half a cup of baking soda directly into the drum of the washing machine and run it on the same settings (highest and hottest).Feb 16, 2021
How do I stop my front load washer from smelling?
Preventing Front Load Washer SmellsClean your washer's gasket and tub regularly, every 2-3 months.Make sure you use an HE detergent formulated for your washer.Use the recommended amount of detergent with each load, refraining from adding too much or too little.More items...•Feb 1, 2020
How do you clean a Frigidaire front load washer?
While front-loaders are designed to use cold water as part of the DOE efficiency program, a hot water wash with bleach added to it cleans the machine and debris from the detergents and water softeners. After every load, run a towel around the circular front window and the gasket, wiping off any water residue.
How do I clean my Frigidaire Affinity washer filter?
0:4113:40How To: Frigidaire/Electrolux Filter 137518800 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is pull it out till it stops. And then on the back left corner there's a littleMoreAll you have to do is pull it out till it stops. And then on the back left corner there's a little release tab you have to press down on. And you can't pull it off the rest of the way.
How do you clean the filter on a Frigidaire washing machine?
0:009:52HOW TO clean the coin trap filter on your FRIGIDAIRE washing machineYouTubeStart of suggested clipEnd of suggested clipThe third type of front loader machine it's not usually so easy to access the filter.MoreThe third type of front loader machine it's not usually so easy to access the filter.
How do you use a Frigidaire Affinity washer?
3:336:35Our Review of the Frigidaire Affinity Washer- FAFW3801LW - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay automatically lit up no issues. Now I wash all of our items. And cold-war. This because I likeMoreOkay automatically lit up no issues. Now I wash all of our items. And cold-war. This because I like to save whatever I can I know some people feel as though that.
How do you clean a Frigidaire Affinity Dryer?
0:051:17Frigidaire How to Properly Clean and Care for Your Dryer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter each load occasionally fabric softener sheets can cause a waxy build-up to form on the lintMoreAfter each load occasionally fabric softener sheets can cause a waxy build-up to form on the lint filter. Simply wash the filter with warm soapy water dry the filter thoroughly.
How do you clean the rubber seal on a Frigidaire washing machine?
Clean Gasket: Use a rag or towel to clean the rubber door gasket on a front-loading washer with either hot soapy water or a spritz of mildew cleaner. Make sure to wipe underneath and around it as well. Be prepared for some slime and gunk, and possibly a stray sock or two!
How To Clean Frigidaire Washing Machine Drain Pump Filter
To learn how to clean your Frigidaire washing machine’s drain pump filter, read this article.
How To Self Clean Frigidaire Washing Machine
Do the following to run a Self Clean cycle on your Frigidaire washing machine…
How to clean a washer with abrasive cleaner?
Press "Start" to begin the cycle. Clean the exterior of the unit with mild soap and a damp cloth. Avoid using abrasive cleaners on the washer; remove stains with diluted chlorine bleach. Clean the detergent drawer when fabric softener or detergent residue builds up.
How to keep a washer from smelling?
Simultaneously press the "Spin Speed" and "Options" buttons until the cycle status display reads "Cln." Then, add either one cup of liquid chlorine bleach or one pouch of Tide Washing Machine Cleaner to the detergent receptacle. Press "Start" to begin the cycle.
Can you mix liquid detergent with powdered detergent?
Use either powdered or liquid detergent, but do not mix the two.Do not to exceed the maximum fill line for either receptacle. Close the detergent drawer gently, to ensure that the detergents are not prematurely dispensed. While the cycle options vary by model, several are common to most machines.
Why won't my Affinity washer drain?
More often than not, the main reason that your Affinity washer will not drain is due to an obstruction, damage, or malfunction in the drain pump. There are times where some small objects or even articles of clothing can get caught up in the pump.
Why is my Frigidaire washing machine not draining?
Malfunctioning Settings. Another quite common cause for drainage issues in a Frigidaire Affinity washing machine pertains to issues with the settings. When they aren’t working correctly, your machine will fail to work in an optimal capacity at best and may not work at all at worst.
What happens when a washer lid switch stops working?
When that lid switch assembly stops working, the washer won’t drain. In order to check for a defective switch assembly, you can use your multimeter to check for continuity in each of the lid switches. Whichever ones don’t show that continuity, replace them.
How to check if a washer is clogged?
The only way to check for an obstruction is to remove all of the hoses from the pump. Don’t just check the ends of the hose, either. 2. Look deep. Use a flashlight to look down into the hose for any potential clogs that could be keeping your washer from draining properly. 3.
What happens when a washer door is not latched?
But if the door isn’t properly latched, the switch will keep the washer from running. When your switch isn’t working properly, the washer may not spin, keeping it from draining out the water in the barrel.
Why is my washer not spinning?
When your switch isn’t working properly, the washer may not spin, keeping it from draining out the water in the barrel. The door lock will generally fail electrically or mechanically. Check to see if there is any damage or if it latches properly and replace if damage is apparent.
Can a washing machine leak?
The tough thing about finding the origin of a leak, particularly in a washing machine, is that there is no one obvious answer. Multiple components, any of which can go bad at any time, could potentially lead to draining issues with your washer. Troubleshooting some of them is a fairly easy endeavor. Not only that, but you can cut down on some of ...
Step 1
Verify that your Frigidaire front washer is plugged into a working electrical outlet and turned on; otherwise, you won't be able to reset it.
Step 2
Press and hold the "Spin Speed" and "Soil Level" buttons together for a few seconds.
Step 3
Continue holding the buttons until a signal sounds then release them. Your washer is now restored to the default factory settings.
