Answer Resetting the service warning light on the Fiat 500X is very simple, with the ignition on and the engine off, hold down the accelerator completely and press the brake 7 times. After the seventh time, you must continue to hold the accelerator down for 30 seconds, then turn off the ignition and wait another 30 seconds.
How do I reset the service light on my Fiat 500?
Also, how do you reset the service light on a 2015 Fiat 500? To turning off the Oil Life Light on 2012, 2013, 2014, 2015 Fiat 500, conform to the following instructions: Turn the ignition key to position “ON” without starting the engine. fully depress accelerator pedal slowly three times within 10 seconds.
What does the warning light on a Fiat 500 mean?
Constant use of the car with the warning light on can cause damage. This symbol represents the rear fog lights of Fiat 500 being switched on. The "gear" containing an exclamation point is a failure detected with the automatic transmission/gearbox. The light will illuminate on the dash along with an audible buzzer.
How do you turn off the accelerator on a Fiat 500?
Turn the ignition key to position “ON” without starting the engine. fully depress accelerator pedal slowly three times within 10 seconds. Turn the ignition Off. Likewise, what does the triangle with exclamation point mean in a Fiat 500? The exclamation mark contained within a triangle symbol is the Fiat 500 generic fault warning light.
How long does it take to reset the oil light on Fiat?
2012-2019 Fiat 500 Oil Change Required Minder Service Light Reset Time needed: 7 minutes. When engine oil needs to replace, Spanner Light or Oil Change Required message will appear on the display. The engine oil life system must be reset after performed the maintenance service or change the engine oil on your vehicle.
How do I reset my warning light?
0:053:01How To Reset The Check Engine Light-EASY And FREE - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt completely disconnected from the battery. And leave it off for about a minute if you want to beMoreIt completely disconnected from the battery. And leave it off for about a minute if you want to be extra safe leave it off for two minutes. But about one minute should be enough for most cars.
What does a triangle with exclamation mark mean on car Fiat 500?
In the Fiat 500L, the warning light depicting a yellow triangle with an exclamation point inside indicates a general failure. It is often accompanied by a message in the display such as "have the stops checked". Therefore, it is often a question of problems with one or more bulbs.Oct 2, 2021
What is a yellow triangle with an exclamation mark in it in a car?
When that warning light triangle with an exclamation point pops up, there's a simple explanation. It means that there is something wrong with your Honda vehicle's Vehicle Stability Assist (VSA®) system. This system helps to stabilize the vehicle during cornering if the car turns more or less than desired.Sep 10, 2019
What does an orange triangle with an exclamation mark mean?
Schedule Service. If you see that warning light triangle with an exclamation mark appear there's a simple explanation. This icon stands for your Honda vehicle's Vehicle Stability Assist system and will illuminate your dashboard when an issue with the system is detected.
Where is the Fiat 500 made?
The new Fiat 500 has been in production since 2007. This Fiat 500 is built in Tychy (Poland), where the Fiat Panda and Ford Ka are also made. The car was and is very popular among its customers because, in the first year of the reintroduction of the 500, more than 200,000 units were built.
How to reset TPMS?
Press the MENU button to enter the main menu. The button is located on the instrument cluster. Go to the RESET TYRES menu. Use the – or + button to scroll the sub-menu. Press the MENU button to select. RESET mode will appears on the display. Select YES to execute the TPMS reset.
What does the yellow light on a Fiat 500 mean?
A yellow warning light will illuminate on the dash to warn that the sensors have detected that one or more tires have been deflated to a dangerous level. Check the tire pressures as soon as possible.
What does the warning light on a Fiat mean?
This warning light signifies a "DualDrive" power steering failure. When the ignition is turned to MAR-ON, the warning light illuminates but should go out shortly. If the warning light stays on, switch the ignition key to the STOP position, and restart the engine. If the warning light continues, it may increase the physical effort to operate the steering wheel. However, the direction is still possible, and please contact a Fiat specialist soon.
What does ABS light mean on a Fiat 500?
Fiat 500 Anti Lock Break System ABS System. When you switch the ignition to the MAR position, the ABS (Antilock Brake System) light will come on and go off shortly after the engine starts. If the light illuminates while driving, the ABS system has failed. ABS is a separate braking aid for regular brakes and works independently.
What does the Fiat 500 dashboard light mean?
Fiat 500 Dashboard Lights And Meaning. New Fiat 500 is a modern city car now looks better, is more efficient, and is equipped with the latest technology. The iconic Fiat 500 will put a smile on your face as it has with so many others. It is recommended that you do not ignore the warning light, especially if it is red or flashing red.
What does the seat belt warning light mean?
The seat belt warning light with an audible chime will alert vehicle passengers to tie their seat belts, along with the ignition key for ON/ RUN position. If a vehicle driver or passenger fails to tighten their belt, the light will start flashing, and there will be a chime sound. Fasten your seat belt for safety reasons, as it will secure you.
What does the high beam on a Fiat 500 mean?
Fiat 500's high beam headlight symbol indicates that high beam headlights are on. Keep the multifunction control lever away from you to switch the headlights to a higher beam. Push lever second time to turn the headlights on low beam. Pull the lever towards you for a temporary high beam, "Flash to pass" scenario.
What does it mean when a car lights up while driving?
If the sign stays on or lights up while driving, this means a failure in the ignition/supply system that could cause excessive exhaust emissions, possible loss of performance, poor vehicle drivability and high fuel consumption. The vehicle can still be driven; the system remedy is required soon. Constant use of the car with the warning light on can cause damage.
