2011-2015 Model Years
- Turn the ignition off
- Hold the TRIP/ODO button and then you turn the car to the on position again
- Continue to hold it until you see the maintenance light go out
- Turn the key to the on position. ...
- Use the trip odometer button on the instrument cluster to get to the Trip A readout.
- Turn off the van.
- Turn the vehicle back on while you press and hold the trip odometer button.
- The maintenance required light should reset.
How to reset Toyota maintenance required light?
Toyota 4Runner: How to Reset Maintenance Light
- Turn the ignition of the vehicle “ On “. ...
- Press the “ Odometer/Trip ” stem button located on the instrument panel to toggle the display to show the Trip A mileage.
- Turn the ignition “ Off “.
- Press and hold the “ Odometer/Trip ” stem button.
- Continue to hold the “ Odometer/Trip ” button while switching the ignition of the vehicle on. ...
How to reset maintenance light?
Your step-by-step guide to resetting your AirPods
- Check your battery If you’ve tried to reset your AirPods by holding the button on the back and you don’t see a light flashing on the inside of ...
- Find the button on the back of the case So, that small button on the back of the AirPods' charging case is the key to resetting the AirPods. ...
- Pair them with your device
How do you reset the maintenance light on a Toyota?
Reset the maintenance light of the 2020 Toyota Tacoma by turning ‘on’ the key position and turning the key back off. Afterward, push and hold the reset button, while turning the key back to the ‘on’ position. Continue holding the reset button until all of the zeros clear and the odometer reading returns. Powered by Hooligan Media.
How do you reset Toyota Sienna?
- Begin by parking the vehicle in a safe place, setting the parking brake, and switching the ignition off.
- Make sure all tire pressures are correct, according to the owner’s manual.
- Turn the engine on.
- Find the TPMS reset button below and to the left of the steering wheel on the instrument panel.
Where is the Toyota Sienna made?
About Toyota Sienna. The Toyota Sienna is a minivan manufactured by Toyota at the Toyota Motor Manufacturing Indiana facility in Princeton, Indiana, United States , for the North American market. It is named for the Italian city of Siena, in the region of Tuscany.
When did the Sienna 3rd generation go on sale?
The third generation Sienna went on sale in the United States in February 2010 and is the first Sienna to ever receive a “Top Safety Pick” award from the Insurance Institute for Highway Safety. Exports from the United States to South Korea began in November 2011. (source: wiki)
Toyota Sienna Fourth Generation (2020 – Present)
The latest Toyota Sienna maintenance required light can be reset by using the navigation controls located on the right instrument cluster of the steering wheel, and the center-mounted display. As a brand new model, the fourth generation surely has a warranty period with a lot of fine print text.
Toyota Sienna Third Generation (2010 – 2020)
The third generation is one of the most successful minivans with a production life of 10 years. Depending on the exact model year, your vehicle could still be in the warranty period, so make sure you’re allowed to reset the maintenance light.
Toyota Sienna Second Generation (1997 – 2003)
The second-generation uses the odometer knob and the small display located within the rev gauge on the instrument panel. Here’s how to do it:
Toyota Sienna First Generation (2003 – 2010)
The earliest Sienna has a maintenance light as well, so I’ll show you how to reset it:
FAQs
Regardless of the generation, you won’t need any tools to reset the maintenance light, only the ignition key.
Summary
Maintenance light can be annoying, especially if you’re following your own maintenance cycles, rather than what the vehicle tells you. Fortunately, resetting it is an easy task, so the next time it shows up, you can reset it in a matter of seconds. I hope you’ve found this article useful, and check out our other guides if you’d like to learn more!
