Receiving Helpdesk

how do you reset the ice maker on a whirlpool refrigerator

by Prof. Wilfredo Wehner Published 3 years ago Updated 3 years ago

How to Reset a Whirlpool Refrigerator Ice Maker

  1. Adjust the feeler of the ice maker to shut it off. ...
  2. Remove the ice tray and look for the reset button on the bottom of the ice maker.
  3. Press and hold down the reset button for about 10 seconds. ...
  4. If your ice maker has no reset button, find the on/off switch on the ice maker and turn it to ‘off’.
  5. Plug the refrigerator back in and the switch will come back on. This resets the ice maker. ...

1. Press the reset button
  1. Locate the reset button. The reset button is usually located at the bottom of the ice maker unit or in some cases at the top or on the bottom of the ice tray.
  2. Once located, press the button down for a few seconds until you hear a beep sound. ...
  3. Once reset, check if the problem has been solved.

How to reset a whirlpool refrigerator [Quick Guide]?

To reset your Whirlpool ice maker, you’ll need to do the following:

  • Check which model of Whirlpool ice maker you own.
  • If your model has a red reset button at the bottom, push this in and hold it for 10 seconds, before releasing.
  • If there’s no reset button, carefully pull out the refrigerator from the wall and take the plug out.
  • Wait 30 seconds, then plug your refrigerator back in again

Where is the reset button on my Whirlpool refrigerator?

  • If you have a side-by-side fridge, the water filter button is above the water tap on the outside of your refrigerator.
  • The filter light and reset button are found inside the French door Whirlpool Fridge on the top right side.
  • French door bottom mount fridges use different buttons to reset the light. ...

How do I Reset my Whirlpool gold refrigerator?

  • Check the temperature setting.
  • Assure that there is enough room for air flow in the refrigerator or freezer.
  • Check for air flow restrictions in vents.
  • Test the temperature control.
  • Clean the condensor coils.
  • Check the door seals.
  • Test the door switch.
  • Test the defrost heater.

Where does a whirlpool refrigerator have its reset button?

To reset the replace filter light of your Whirlpool fridge, take the following steps:

  1. Press the options button. Doing this will pop up three options.
  2. Select “Filter reset” from the options provided.
  3. Hit the confirm button and wait. After three seconds, you will hear a beep indicating that a reset has been performed.

Where is the reset button on my ice maker?

You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.

Why isn't My Whirlpool fridge making ice?

A Whirlpool refrigerator not making ice may come down to incorrect temperature settings. For proper ice production, the freezer should be set between 0-5°F. If the temperature is too warm, ice may not adequately freeze and can appear smaller or misshapen.

How do I manually reset my ice maker?

Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.

Do Whirlpool refrigerators have a reset button?

Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.

How do you jumpstart a whirlpool ice maker?

3:314:44IceMaker Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse your crescent wrench to get a nice tight grip on there you don't want to leave it loose becauseMoreUse your crescent wrench to get a nice tight grip on there you don't want to leave it loose because then I start leaking water and they'll be water all over the place.

Why is my ice maker not working but water does?

Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

How do I force my Whirlpool ice maker to cycle?

Look at the center of the Whirlpool icemaker to find the rotating arm that pushes the ice cubes out. Grab the plastic teeth on the arm, and gently pull them in a clockwise direction. You will hear a slight winding sound. The icemaker should start into its cycle.

How do I troubleshoot my Whirlpool ice maker?

0:009:13Whirlpool Ice Maker Not Making Ice. How To Troubleshoot Your Ice maker.YouTubeStart of suggested clipEnd of suggested clipAll righty guys so today what I'm gonna show you is a quick little video on how to test an ice makerMoreAll righty guys so today what I'm gonna show you is a quick little video on how to test an ice maker here we have a Whirlpool refrigerator. This particular ice maker is working how do I know because

Why does my fridge dispense water but not ice?

If the water inlet valve is defective, or if it has insufficient pressure, it won't allow water to flow through. As a result, the ice maker won't make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.

How do you turn on the ice maker on a Whirlpool french door refrigerator?

0:331:08How to turn ice maker on & off on a Whirlpool French door refrigeratorYouTubeStart of suggested clipEnd of suggested clipTo turn on the ice maker move the switch to the left or the on position to turn off the ice makerMoreTo turn on the ice maker move the switch to the left or the on position to turn off the ice maker move the switch to the right or off.

Can you reset a refrigerator by unplugging it?

Yes, unplugging the refrigerator will reset the appliance, provided you leave the refrigerator unplugged and undisturbed for 45 to 50 minutes. When the refrigerator is unplugged, do not open the doors.

Where is the water filter reset button on Whirlpool refrigerator?

0:001:12How to reset Whirlpool refrigerator water filter notification - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarted if your fridge beeps after dispensing water and this indicator light is flashing it meansMoreStarted if your fridge beeps after dispensing water and this indicator light is flashing it means the water filter should be replaced to reset the change water filter indicator.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version2.01sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[11:14:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[11:14:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[11:14:53] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[11:14:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[11:14:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[11:14:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:14:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:14:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:14:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:14:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[11:14:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (10.26ms)
  • Application (2s)
  • 1 x Application (99.47%)
    2.00s
    1 x Booting (0.51%)
    10.26ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed1.98s
    • select * from `posts` where `published_at` <= '2025-07-08 11:14:53' and `slug` = 'how-do-you-reset-the-ice-maker-on-a-whirlpool-refrigerator' and `posts`.`deleted_at` is null limit 1
      2.21ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-07-08 11:14:53
      • 1. how-do-you-reset-the-ice-maker-on-a-whirlpool-refrigerator
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 185671 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      7.96msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 185671
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      3.46ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      370μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      220μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      1.96s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 9722 limit 1
      830μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 9722
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        cGseTftgm5GymJlIlltB7uLjUG2XzhPGzmIwkD2Y
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-reset-the-ice-maker-on-a-whirlpoo...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /how-do-you-reset-the-ice-maker-on-a-whirlpool-refrigerator
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "_pk_id.64.7c30=303497c3d06cd5eb.1751953488.; _pk_ses.64.7c30=1; _pk_id.63.7c30=4f52cfd66bec64be.1751953490.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6IndSU091QVloSDBSbnpMaGJ2cGRrcXc9PSIsInZhbHVlIjoiZXNsZE1NRE4rTkhLbnBnYmFpREhNWU8xbVFtUjYrZ2hrcGJTTmF0NkFEcnF3bzVWUGw1dUNkbFJZL1JwREpsaTJVRENVMzgzbU16aWg2OXkveExXRWIrR0Rsb2lWcHdiMVZBWExjQzVteFVlMmdtQVE4R0gxT1A4eFVBVEVRMGgiLCJtYWMiOiJhMWZkMjZmZWI5ZDExNzBjMTI3MDJmYzk3OTM3ZWZkNmZiOTk3MWZkMDAzNmJmMmViNDQ4ODY5ZTVhYWIzYTc2IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IjVQb1hFSlQ4SHdpQ0Fwd0RyOXJLb0E9PSIsInZhbHVlIjoiQ2cxcnE2YSszdHFPK3BqaUJCSXJwNjM5MDFWQ3VwcC92SGI3eVhMNzJWQlFyREFLeGFpUzVvUldaQmh0STFKZjNKYUhrYVloS25BdVJQNEF1SkpaVFJxdWEwSXlnSlVFN1VxNDdCZThESnlJMnBIbjVLdGV3VXc1eGxYckxsd0QiLCJtYWMiOiI1M2Q4MDNmODY1Y2MxYjdmYmMwY2FlY2QxNDFjYTE5Zjc5ZjVjZDQ5MGQ5N2ZmYjZhNDc1ODMxMjkwOTEyMGQyIiwidGFnIjoiIn0%3D_pk_id.64.7c30=303497c3d06cd5eb.1751953488.; _pk_ses.64.7c30=1; _pk_id.63.7c30=4f52cfd66bec64be.1751953490.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6IndSU091QVloS" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.119" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "95bd45b61d8074a7-YYZ" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.119, 172.69.130.159" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/how-do-you-reset-the-ice-maker-on-a-whirlpool-refrigerator" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/how-do-you-reset-the-ice-maker-on-a-whirlpool-refrigerator" "REMOTE_PORT" => "57626" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.130.159" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "_pk_id.64.7c30=303497c3d06cd5eb.1751953488.; _pk_ses.64.7c30=1; _pk_id.63.7c30=4f52cfd66bec64be.1751953490.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6IndSU091QVloSDBSbnpMaGJ2cGRrcXc9PSIsInZhbHVlIjoiZXNsZE1NRE4rTkhLbnBnYmFpREhNWU8xbVFtUjYrZ2hrcGJTTmF0NkFEcnF3bzVWUGw1dUNkbFJZL1JwREpsaTJVRENVMzgzbU16aWg2OXkveExXRWIrR0Rsb2lWcHdiMVZBWExjQzVteFVlMmdtQVE4R0gxT1A4eFVBVEVRMGgiLCJtYWMiOiJhMWZkMjZmZWI5ZDExNzBjMTI3MDJmYzk3OTM3ZWZkNmZiOTk3MWZkMDAzNmJmMmViNDQ4ODY5ZTVhYWIzYTc2IiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6IjVQb1hFSlQ4SHdpQ0Fwd0RyOXJLb0E9PSIsInZhbHVlIjoiQ2cxcnE2YSszdHFPK3BqaUJCSXJwNjM5MDFWQ3VwcC92SGI3eVhMNzJWQlFyREFLeGFpUzVvUldaQmh0STFKZjNKYUhrYVloS25BdVJQNEF1SkpaVFJxdWEwSXlnSlVFN1VxNDdCZThESnlJMnBIbjVLdGV3VXc1eGxYckxsd0QiLCJtYWMiOiI1M2Q4MDNmODY1Y2MxYjdmYmMwY2FlY2QxNDFjYTE5Zjc5ZjVjZDQ5MGQ5N2ZmYjZhNDc1ODMxMjkwOTEyMGQyIiwidGFnIjoiIn0%3D_pk_id.64.7c30=303497c3d06cd5eb.1751953488.; _pk_ses.64.7c30=1; _pk_id.63.7c30=4f52cfd66bec64be.1751953490.; _pk_ses.63.7c30=1; XSRF-TOKEN=eyJpdiI6IndSU091QVloS" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.119" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "95bd45b61d8074a7-YYZ" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.119, 172.69.130.159" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1751953493.4779 "REQUEST_TIME" => 1751953493 ]
        request_cookies
        0 of 0
        array:6 [ "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null "_pk_id_63_7c30" => null "_pk_ses_63_7c30" => null "XSRF-TOKEN" => "cGseTftgm5GymJlIlltB7uLjUG2XzhPGzmIwkD2Y" "askhelpdesk_session" => "CH9k223siW3S4VCLYjxHvJKgLn3MURbi7RX4MDIR" ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Tue, 08 Jul 2025 05:44:53 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Ink3TXJQakdOSnhDZUJ3ejNKTUcvVkE9PSIsInZhbHVlIjoiYlhLVnR2K3o3U0hxYStQem1ZZVFPVmVKRnIvY25NcXFZY000YnV2d0lFWGFqK0dnWU1YQkxqVVgwbUJVUHJkR2ExR3g4YUY2ZnlNdlhFeHZDK1Bpb0dRRlRvV2xKVzVndVdlbXZWemcyOHpVZ21sUHRnU1hDaURFeWQzaVp1VVgiLCJtYWMiOiIxNDc5YzkyYjAwMzg2YjdjZGJhMTFjM2Q4OTRhOWJjMjI2N2I2MWQ0YjlhMmYyNTAxYjk5NWEyNmM3MjBkMWUzIiwidGFnIjoiIn0%3D; expires=Tue, 08-Jul-2025 07:44:55 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6Ink3TXJQakdOSnhDZUJ3ejNKTUcvVkE9PSIsInZhbHVlIjoiYlhLVnR2K3o3U0hxYStQem1ZZVFPVmVKRnIvY25NcXFZY000YnV2d0lFWGFqK0dnWU1YQkxqVVgwbUJVUHJkR2ExR3g4Y" 1 => "askhelpdesk_session=eyJpdiI6ImZzUndjUjZMZzJKRFk4bHQzTjFEQ3c9PSIsInZhbHVlIjoiNmNTbi95WXdJSFRhNU5MNDZSYmQweStBc0UxMGR6bVV0Y3hvVGo4RnBncHg3bGtDYWl3RitJM2VxS0VVOVRGUENsejhkbk92RUNVVEtUdUNYSFRWTFlaUlFneloxWUs5NENhWHhkODVYbmJ3eE5Za3VQblpaMkp2c3JyaDJtaXgiLCJtYWMiOiJmMTUxMjZkNGIwZTA0OTUyZmZhOGEwMjBlNDdlMzNhM2Y0NWFmOGI5ZjI3YWRiZmM5NDdjZjYzY2FhOTZhNGExIiwidGFnIjoiIn0%3D; expires=Tue, 08-Jul-2025 07:44:55 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImZzUndjUjZMZzJKRFk4bHQzTjFEQ3c9PSIsInZhbHVlIjoiNmNTbi95WXdJSFRhNU5MNDZSYmQweStBc0UxMGR6bVV0Y3hvVGo4RnBncHg3bGtDYWl3RitJM2VxS0VVOVRG" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Ink3TXJQakdOSnhDZUJ3ejNKTUcvVkE9PSIsInZhbHVlIjoiYlhLVnR2K3o3U0hxYStQem1ZZVFPVmVKRnIvY25NcXFZY000YnV2d0lFWGFqK0dnWU1YQkxqVVgwbUJVUHJkR2ExR3g4YUY2ZnlNdlhFeHZDK1Bpb0dRRlRvV2xKVzVndVdlbXZWemcyOHpVZ21sUHRnU1hDaURFeWQzaVp1VVgiLCJtYWMiOiIxNDc5YzkyYjAwMzg2YjdjZGJhMTFjM2Q4OTRhOWJjMjI2N2I2MWQ0YjlhMmYyNTAxYjk5NWEyNmM3MjBkMWUzIiwidGFnIjoiIn0%3D; expires=Tue, 08-Jul-2025 07:44:55 GMT; path=/XSRF-TOKEN=eyJpdiI6Ink3TXJQakdOSnhDZUJ3ejNKTUcvVkE9PSIsInZhbHVlIjoiYlhLVnR2K3o3U0hxYStQem1ZZVFPVmVKRnIvY25NcXFZY000YnV2d0lFWGFqK0dnWU1YQkxqVVgwbUJVUHJkR2ExR3g4Y" 1 => "askhelpdesk_session=eyJpdiI6ImZzUndjUjZMZzJKRFk4bHQzTjFEQ3c9PSIsInZhbHVlIjoiNmNTbi95WXdJSFRhNU5MNDZSYmQweStBc0UxMGR6bVV0Y3hvVGo4RnBncHg3bGtDYWl3RitJM2VxS0VVOVRGUENsejhkbk92RUNVVEtUdUNYSFRWTFlaUlFneloxWUs5NENhWHhkODVYbmJ3eE5Za3VQblpaMkp2c3JyaDJtaXgiLCJtYWMiOiJmMTUxMjZkNGIwZTA0OTUyZmZhOGEwMjBlNDdlMzNhM2Y0NWFmOGI5ZjI3YWRiZmM5NDdjZjYzY2FhOTZhNGExIiwidGFnIjoiIn0%3D; expires=Tue, 08-Jul-2025 07:44:55 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImZzUndjUjZMZzJKRFk4bHQzTjFEQ3c9PSIsInZhbHVlIjoiNmNTbi95WXdJSFRhNU5MNDZSYmQweStBc0UxMGR6bVV0Y3hvVGo4RnBncHg3bGtDYWl3RitJM2VxS0VVOVRG" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "cGseTftgm5GymJlIlltB7uLjUG2XzhPGzmIwkD2Y" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/how-do-you-reset-the-ice-maker-on-a-whirlpool-refrigerator" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]