How do you reset the heater on a Hot Springs Spa?
- Locate the spa's high-limit reset. This is a red button found on many spa packs.
- Press the high-limit reset button.
- Turn on your spa and observe its operation.
- Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.
Where is the reset button on a hot springs spa?
This is a red button found on many spa packs. Press the high-limit reset button. Turn on your spa and observe its operation. Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power. Click to see full answer. Considering this, where is the reset button on a Hot Springs hot tub?
How do you reset a hot tub heater?
A spa heater may need to be reset if it has tripped or stopped working. Using the high-limit reset switch and checking all breakers and GFCI outlets can reactivate the spa's heater. A spa heater has a high-limit reset button.
How do I troubleshoot my hot spring spa?
Plus, turn to your dealer for repairs by a certified technician who knows Hot Spring models inside and out. To troubleshoot an issue with your spa, locate your specific problem in the chart below to help determine a probable cause, and then apply the right solution. Do you need to call a professional technician?
How do I reset the power to my spa?
Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power. Turn the spa on.
Where is the heater reset button on a Hot Springs hot tub?
The reset button is located in the equipment compartment. Plug the spa back into the power source. Check the circulation pump if the spa does not heat while jets and lights are working.21-Jul-2017
Why is my Hot Springs spa not heating?
Make sure there is no foreign debris in the spa, pull filters out and replace caps. Run jets 30 min, turn the power to the spa off for 1 minute, and then restore power. If you have SpAudio, you may have a blown fuse or it may have come unplugged. Call for more information.
How do I reset my hot tub heater?
3:365:05How To Reset Your Spa / Hot Tub Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd all you have to do is take your door screw. And insert it into the top membrane on the top ofMoreAnd all you have to do is take your door screw. And insert it into the top membrane on the top of the box and push. It two or three times power your spot back on using your braids.
How do you reset the high limit switch on a hot springs spa?
The hot tub high limit switch is sometimes triggered when you're refilling your hot tub and can be reset by pressing the large red button on your spa pack.13-Jan-2015
How do you test a Hot Springs heater?
1:514:35Hot Spring Spa Parts - Heaters Identifying and Testing - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you open the control panel. The button is on the other side of the heater. So on the other sideMoreWhen you open the control panel. The button is on the other side of the heater. So on the other side. There's the heater button with the reset. And you have to push it.
How long does it take a hot springs hot tub to heat up?
With a Hot Spring or Caldera hot tub, it will take between 8-10 hours to heat up initially, but will remain it's set temperature for the whole fill. Our spas are very smart and know when the heater should kick on and when it is okay to power down.
How do you turn on a hot tub heater?
0:512:16How to put your pool into spa mode and start the Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top valve step two is turning the bottom valve. Step three is turning the gas on here. Step fourMoreThe top valve step two is turning the bottom valve. Step three is turning the gas on here. Step four is coming over to the heater. And hitting the spa button.
How do you know if your hot tub heater is bad?
To test if a bad heater is causing your tripped breaker, you can disconnect the copper tabs (or wires) from the spa pack to the heater element. Once disconnected, turn the power back on. If the breaker stays on, you've determined that the heater is bad.04-Mar-2016
Where is the pressure switch on a Hot Springs hot tub?
heater housingThe Pressure Switch on a hot tub or spa is a pressure sensor that is mounted onto the heater housing, or very close to the exit point of the heater.
How do you reset the limit switch on a furnace?
How to Reset a Furnace Limit SwitchLocate your furnace's heating duct. ... Locate the white limit switch. ... Look at each arm to identify the settings. ... Identify the component (setting) located in between the two arms. ... Set the temperature on the middle component to approximately 105 to 115 degrees Fahrenheit.More items...
Where is the high limit reset button?
The High Limit Reset Button is located behind the gas valve.
How do I fix HL error on hot tub?
HL ErrorTurn the power off at the breaker for 15 seconds and then flip it back on. This will reset the HL reading.You will notice the display show some numbers. ... If you see the HL come back within a day or so, this means that there is likely a problem with the probe or the motherboard.
Why do I need to reset my spa heater?
A spa heater may need to be reset if it has tripped or stopped working. Using the high-limit reset switch and checking all breakers and GFCI outlets can reactivate the spa's heater. Advertisement.
What is a spa heater?
A spa or hot tub provides a form of personal relaxation known as hydrotherapy. The spa's pump and heater provide a soothing environment by circulating water through jets and increasing it to the bather's desired temperature. A spa heater may need to be reset if it has tripped or stopped working.
Why does my spa pack stop working?
This is controlled by a sensor instead. If the heater element is not getting the proper amount of water flow due to pump problems or poor water level, the sensor will trip the heater and cause it to stop operating. Check the spa's water flow for pump operation. Make sure the spa water is at the proper fill level.
Can you use a spa heater if it is not at its proper level?
Make sure the spa water is at the proper fill level. Never try to operate a heater if the spa is not at its proper fill level. Doing so can cause the pump to lose prime and the heater element to burn up. A spa heater has a high-limit reset button.
Why do you need a hot spring spa?
Hot Spring spas are designed to make it easy for you to monitor water quality, clean the filters, and protect your spa from the elements.
How do I keep my spa in tip top shape?
Follow these tips to keep your home spa in tip-top shape and to minimize the time and cost of repairs. Rinse the underside of your hot tub cover frequently with a garden hose to keep algae, mold, and mildew at bay. Rinse your filters every month to keep clear water flowing. (TRI-X ® filters are dishwasher-safe.)
How to remove scale from hot tub?
To remove the scale, drain the spa water, scrub off the scale, refill the spa, and balance the water. Contact your dealer for tips on how to prevent future scale buildup. Remember to exercise caution when attending to your hot tub’s mechanical and electrical parts.
How to remove scum from a spa?
Wipe the scum off with a clean rag; if the layer of scum is heavy, drain the spa and use a spa surface and tile cleaner to remove the scum before refilling the spa. Contact your dealer for cleaning recommendations and tips to prevent future buildup. Algae growth. High pH.
Why do you cover a hot tub?
Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature.
What causes a spa filter to be dirty?
Filters are dirty. Excessive buildup of oils and organic matter. Improper sanitation. Suspended particles or organic matter. Overused or old water. Clean the filters. Shock the spa water with sanitizer. Add sanitizer as your owner’s manual recommends; adjust the pH and/or the alkalinity to the recommended range.
When to start thinking about spa maintenance?
The best time to start thinking about spa maintenance and repair options is before you even purchase your hot tub. When you buy a hot tub from a reputable Hot Spring dealer, your package includes access to a wealth of expert knowledge and certified technicians who can ensure the best possible outcome when your spa experiences problems. So, plan a visit to your showroom today. You can also refer to our frequently asked questions, request a personalized price quote, or download a brochure for more details about Hot Spring spas.
What to do if your hot tub control panel is not working?
If the control panel simply seems not to be working you can check the connections to it and also see if any water has got in it which could be the problem. If all seems well then you may need to replace your control panel or consult your hot tub dealer.
How to fix a GFCI breaker on a hot tub?
How to fix a tripped GFCI circuit breaker on a hot tub. The GFCI circuit breaker on a hot tub will trip if there is an electrical fault in the hot tub. Once the circuit breaker has tripped no more electricity will reach the hot tub. If this has happened all you need to do is to switch the switch back on again.
Why does my hot tub breaker keep tripping?
Why does my hot tub’s breaker keep tripping? The hot tubs breaker trips when there is an electrical fault or short circuit in the hot tub. If the circuit breaker keeps tripping then there is a problem that’s needs sorting out. The chances are that there is some loose wiring somewhere, some moisture has got into an electrical component or something like the heating element needs replacing. If the breaker keeps tripping on a regular basis, or won’t switch back on again, then the best advice is to get a qualified hot tub engineer to come and test the hot tub to find out what the issue is.
How to check hot tub cable?
Check both ends of the cable particularly where it goes into the hot tub as it will probably plug into a socket. Does the socket look corroded by any chance? For a control panel that is built into the hot tub if you have a look inside the service bay of the hot tub you will probably see that it is also connected to the hot tub via a cable which will no doubt be plugged in somewhere. Again check for corrosion.
Why does my hot tub heater cut out?
If the heater becomes too hot for whatever reason then there is a high limit switch on it and it will cut out for safety sake. If the rest of your hot tub seems to be working ok and you are sure that you have got electricity coming to it but the water is cold then the chances are that your heater has cut out.
What does it mean when a hot tub cable is damaged?
Any damage to the cable like this will mean that the control panel itself will not operate properly. Depending upon the model of your hot tub, and also the type of control panel, it should be relatively easy to change the cable and solve the problem.
Why does my hot tub overheat?
A hot tub overheats when the heating element hasn’t got a strong enough flow of water going around it to dissipate the heat that it is generating . When this happens, for safety sake, the hot tub high limit sensor will kick in and then the heating element will automatically cut out.
