- Put the key into the ignition and turn the switch to the "on" position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the ...
- Repeat Steps 1 and 2 two more times.
How do I reset the airbag light on a Hyundai Sonata?
04/03/2020 · How to Reset Hyundai Airbag Light. Locate the OBD-II port under the dashboard. Plug-in in one of the scanners mentioned above. Turn the ignition to position II. Select the Hyundai model (Elantra, Tucson, Accent, Santa Fe, Sonata, Genesis, Azera, Veloster, Equus etc.) Select airbag / SRS in the menu. Select Read Codes.
How do you reset the airbag light on a Honda Accord?
You can easily reset the airbag light on your Hyundai from home using a handheld pocket scanner. These are also called code readers or code erase tools. Make sure you get the on-board diagnostics II, OBD II, code reader not the OBD I for your Hyundai.
How do you reset the airbag light on a Toyota Corolla?
Where do you reset the airbag light? How to Reset an Airbag Light Put the key into the ignition and turn the switch to the “on” position. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
What to do if your airbag light is on in your car?
15/10/2021 · Look ahead to the airbag warning mild to show off. Flip the ignition change of your automobile again off for a little bit longer than three seconds. Repeat steps 1 by way of 3 twice to make 3 times whole. Flip your ignition change again on to completely reset the airbag mild.
How do I turn my airbag light off?
Conclusion – How to Reset Airbag LightTurn your ignition on and off.Restart your vehicle and do a test drive.Examine the passenger airbag switch.Inspect whether seat belts are fastened or working correctly.Verify that the passenger seat sensor is not applied.Use a scanner with an SRS or airbag light reset option.More items...
Can you reset airbag light without tool?
In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals. Check the wiring system underneath the driver or passenger seat for any loose wires or corrosion in the connector plug. Spray the connector plugs with an electronic cleaner and restart your car.02-Oct-2021
Can you reset the airbag warning light?
You can reset the airbag light on your vehicle from your home garage, saving yourself a trip to the dealership or mechanic. ... After all repairs have been performed, you can reset the airbag light yourself using a handheld computerized tool purchased from an auto parts retailer.
What does airbag light mean on Hyundai?
If your Hyundai airbag light stays on when driving, it means that there is a problem with the airbag system or a sensor has failed. The airbags in your car may not deploy in case of an accident. ... If no problems are found, the airbag light on your Hyundai should turn off.
How do you clear an airbag code?
No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Also, these codes are hardware issue codes. Hard Codes require professional reset services like us.07-Sept-2017
What scanner will reset airbag light?
Autel AutoLink AL619 OBD2 Scanner, ABS, SRS Airbag Scan Tool, Turn Off ABS, Airbag Warning Lights, Ready Test, Advanced Version of ML619.
How do you reset the airbag light on a Hyundai Santa Fe?
How to Reset the Airbag Light on a HyundaiFind the diagnostic-link connector underneath the driver's side of the car on the dashboard. ... Put the key into the ignition and turn it two clicks forward to the "On" position. ... Turn on the OBD II code reader and use the arrows to navigate the menu.More items...
How do you reset the airbag light on a Hyundai Elantra?
To reset the airbag light in your 2013 hyundai elantra vehicle, turn the ignition key to the "on" position and wait for the airbag button to illuminate and then switch off. Turn the key to the off position and wait three seconds. Repeat these steps twice and your vehicle's airbag system should be reset.
Why is my airbag light on in my Hyundai Elantra?
If your Hyundai airbag light stays on when driving, it means that there is a problem with the airbag system or a sensor has failed. The airbags in your car may not deploy in case of an accident. ... If your Hyundai is still under warranty, your dealer may repair your car free of charge.
Why is my airbag light on in my Hyundai Sonata?
There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.11-Jun-2019
Does Hyundai warranty cover airbags?
Hyundai is extending the warranty coverage for the driver's front airbag clock spring assembly on certain 2011-2014 Elantra vehicles, 2011-2013 Sonata vehicles, and 2011-2014 Sonata Hybrid vehicles to 15 years, unlimited mileage, from the date of original retail delivery or date of first use.
What is the airbag light?
The airbag light is an indicator that there is a problem with the vehicle's Supplemental Restraint System. ... When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision.03-Dec-2019