How to Reset Pico Remote to Factory Settings
- Triple tap and hold either the upper or lower button on the Pico remote control. Don’t release the button after the third tap.
- Press the button on the third tap for about 3 seconds until the LED next to the upper button turns on solid.
- Immediately release the button and triple tap again. ...
How do I pair a Pico remote with a Caseta device?
There are two different ways to pair a Pico remote with a Caseta device. If you have a Caseta Smart Bridge and are planning to use the Lutron App to control your Caseta system via a smart device, we recommend pairing your pico remotes via the Lutron App. Otherwise, you can pair the remote manually by proceeding to Section (2) Stand Alone Pairing.
How do I wipe the data of my Pico?
Hold the power button with volume + button at the same time for 10 seconds, an Android robot is displayed. Use the volume buttons to move, and the power button to select. Select “wipe data”. Confirm and wait, if no errors occur, the Pico will restart automatically.
How do I change the battery in my Pico wireless control?
Place a flathead screwdriver into the slot at the bottom of the Pico wireless control. Twist to open. DO NOT press buttons without back enclosure on. Slide the battery out, toward the top of the Pico wireless control. Slide a new battery underneath the contact strap, with the (-) terminal toward the front of the Pico wireless control.
How do I pair a Pico remote to a dimmer or switch?
NOTE: You cannot manually pair a PICO remote to a dimmer or switch that has already been added to the Lutron App. You must pair the Pico via the Lutron App following the instructions in Section (1) if this is the case.
How do you reprogram a Pico?
0:010:47How To Program Pico Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right we're gonna show you how to program a Lutron caseta pika remote. So all you have to do isMoreAll right we're gonna show you how to program a Lutron caseta pika remote. So all you have to do is once you have the switch installed hold down this on the switch for six seconds.
How do I pair a Pico remote to a switch?
0:282:34How To Pair A Lutron Caseta Pico Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to pair them and all you're gonna do is first hold down these switch here and then you're gonnaMoreSo to pair them and all you're gonna do is first hold down these switch here and then you're gonna hold down the switch over here and it will pair the devices.
How do you pair a Pico remote with a Caseta dimmer?
0:000:23How to pair Lutron Caseta Dimmer with Pico Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right super quick video to pair your remote. To your Lutron in wall wireless dimmer all you doMoreAll right super quick video to pair your remote. To your Lutron in wall wireless dimmer all you do is hold the bottom button for six seconds. And these lights will all start blinking.
How do I reset my Lutron?
0:552:25Lutron RA2 Select- Bridge Reset | Smart Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo. We go 1 2 3 hold. There's that slow flash then 1 2 3 hold there's that fast flash. And then aMoreSo. We go 1 2 3 hold. There's that slow flash then 1 2 3 hold there's that fast flash. And then a couple of seconds.
How long do Pico remote batteries last?
10-yearThe Pico is battery- powered, with an industry-leading 10-year battery life.
How do I pair my Lutron Caseta?
Section (1): Pairing the Pico remote using the Lutron App To add devices to the app by going to Settings>Add Device>Select device option> press and hold "Off" button on device for 10 seconds or until the screen changes on the app.
How do I reset my Lutron Caseta dimmer?
How do I factory reset my Lutron Caseta dimmer? Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.
How do I reset my Lutron dimmer switch?
0:002:21How To Reset Lutron Caseta Dimmer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're just gonna reset it by pressing this top button three times and then you hold on the thirdMoreAnd we're just gonna reset it by pressing this top button three times and then you hold on the third. Press the lights are gonna light up here after you hold it down for 10 seconds.
How many devices can a Pico remote control?
Pico Controls (or other One-Way devices) can transmit to any number of devices with-in the 30ft RF Range. As long as your 18 PowPaks are within 30ft, the Pico should be able to pair to all 18. Hope this helps!
How do I reset my Lutron wireless switch?
How do I factory reset my Lutron Caseta switch? Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.
How do I pair my pico remote to my maestro?
0:000:34Maestro Wireless Dimmer or Switch: How to Link with a Pico ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin flashing press and hold the off button on the Pico wireless control for approximately 6MoreBegin flashing press and hold the off button on the Pico wireless control for approximately 6 seconds. The lighting load will flash three times and both devices will automatically exit setup mode.
How do I connect my Lutron to a new WIFI?
Make sure your Smart Bridge is connected to the new router. ... Connect the ethernet cable from the bridge directly to a LAN port on the new router.Re-set your router by cycling power off for 10 seconds and then turn it back on. ... Re-set your Smart Bridge by cycling power off for 10 seconds and then turn it back on.
How to pair a Pico remote to a Caseta?
Otherwise, you can pair the remote manually by proceeding to Section (2) Stand Alone Pairing.
What is a Pico remote?
Used on the other end of a 3-way application or Multi location applications where there is one Caseta dimmer and the other locations within the circuit are Pico remotes. This allows dimming at all locations and flexibility in the placement of where the other switch point can be placed in the home.
How to turn off Pico wireless?
Quickly tap the OFF button on the Pico wireless control 3 times and continue to hold it for 6 seconds after the third tap.
What is the model number of a Pico remote?
The most common Pico remote model numbers are the dimmable model PJ2-3BRL-GWH-L01 mostly used with Caseta dimmers and the standard on and off PJ2-2B-GWH-L01 which is typically used with Caseta On/Off switches.
What battery does a Pico remote use?
A Pico remote gives you control of your smart dimmers or switches wherever you want – no wires required. It is a wireless remote powered by a lithium CR2032 battery rated for 10 years at an average of 10 presses daily.
How to open Pico wireless control?
Place a flathead screwdriver into the slot at the bottom of the Pico wireless control. Twist to open. DO NOT press buttons without back enclosure on.
How to recall a favorite level on Pico?
You can use the round "favorite" button on the Pico remote control to recall a favorite level. We've set it to 50%, but you can change it to any level you like.
